Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Intelamp Solar Light. Designed for outdoor use, this super bright wall lamp features 3 modes, a motion sensor, and IP65 waterproofing, making it ideal for gardens, yards, paths, and garages. Please read this manual carefully before use to ensure optimal performance and longevity of your product.
Figure 1: Intelamp Solar Light components (light unit, solar panel, remote control).
Setup and Installation
The Intelamp Solar Light is designed for self-contained installation, offering flexibility for various outdoor environments. It can be mounted on a pole or a wall.
Choosing an Installation Location
- Solar Panel: Ensure the solar panel is mounted in direct sunlight for optimal charging efficiency.
- Light Unit: The recommended installation height for the light unit is 10-12 feet (approximately 3-3.6 meters) to achieve an illumination range of up to 3000 sq ft.
- Cable Length: The system includes a 5-meter (16.4 ft) waterproof cable, allowing for flexible placement of the solar panel and light unit.
Installation Methods
Figure 2: Two common installation methods: Pole Mount and Wall Mount.
- Wall Mount: Securely attach the light unit and solar panel to a wall using appropriate fasteners (not included). Ensure the solar panel is angled to receive maximum sunlight.
- Pole Mount: Attach the light unit and solar panel to a pole. The light unit's direction of illumination can be freely adjusted by 120° to cover desired areas.
Figure 3: Wide-angle illumination coverage.
Figure 4: Flexible placement of solar panel and light unit using the extended cable.
Video: Installation and Features Overview
Video 1: Demonstrates the solar light's wide-angle design, adjustable illumination, efficient solar panels, low light charging, automotive-grade battery, all-night lighting, rain test, optical lampshade, 5m cable, easy mounting, and motion sensor activation.
Operating Instructions
Your Intelamp Solar Light features intelligent sensing and multiple lighting modes for enhanced security and convenience.
Motion Sensor Operation
- The light is equipped with 2 motion sensors, significantly enhancing sensing sensitivity.
- It operates with low brightness when no motion is detected, conserving power.
- Upon detecting motion, the light automatically switches to high brightness for illumination.
- The dual wide-angle illumination faces offer a 240° lighting angle.
Figure 5: Motion-activated 4000LM brightness with 180° horizontal coverage.
Intelligent Mutual Control
When one Intelamp solar light is activated by motion, it emits a signal that triggers all other Intelamp solar lights within a 66ft (20m) radius to illuminate simultaneously. This feature allows for advanced path illumination.
Figure 6: Multiple lights linking together for synchronized illumination.
Figure 7: Sensor-linked lights activating as a user approaches.
Remote Control
The solar light comes with a remote control for convenient adjustment of settings, including dimming capabilities.
Maintenance
To ensure the long-term performance and efficiency of your Intelamp Solar Light, follow these maintenance guidelines:
- Solar Panel Cleaning: Regularly clean the surface of the solar panel to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Lampshade Care: The optical high transparency lampshade is designed to resist yellowing over time. Clean it gently with a soft cloth and mild detergent if needed.
- Weather Resistance: The light is IP65 waterproof, designed to withstand various outdoor weather conditions, including rain. However, ensure all connections are secure during installation.
- Temperature Management: The solar panel's design provides shade to the lamp, helping to reduce its temperature during hot summers and extend the lifespan of the battery and LED components.
Figure 8: IP65 rating ensures durability in various weather conditions.
Troubleshooting
If you encounter any issues with your Intelamp Solar Light, please refer to the following common troubleshooting tips:
- Light not turning on at night:
- Ensure the solar panel is receiving adequate direct sunlight during the day.
- Check for any obstructions blocking sunlight from reaching the panel.
- Verify that the light is switched ON (if applicable, via remote or physical switch).
- Light not as bright as expected:
- Clean the solar panel and the lampshade to remove any dirt or dust.
- Ensure the battery has had sufficient time to charge (at least 5 hours of direct sunlight).
- Confirm the light is operating in the desired brightness mode (if adjustable).
- Motion sensor not working:
- Check if the sensor is obstructed.
- Ensure the light is in a motion-sensing mode.
- Test the sensor's range and sensitivity.
- For persistent issues, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | YL005-18GP10 |
| Brand Name | intelamp |
| Power Source | Solar |
| Light Source | LED bulbs |
| Bulbs Included | Yes |
| Dimmable | Yes |
| Solar Cell Type | Lithium Battery |
| Battery Capacity | 20000 mAh (Automotive-grade) |
| Solar Panel Type | TOPCon 3rd generation |
| Solar Panel Power | 20W |
| Charging Efficiency | 24%+ |
| Full Charge Time | 5 hours (direct sunlight) |
| Illumination Duration | 12+ hours (all-night) |
| Brightness | 4000 LM |
| Illumination Range | Up to 3000 sq ft |
| Illumination Angle | 180° wide angle (3-sided LED layout), 240° total lighting angle |
| Adjustable Illumination | 120° adjustable direction |
| Motion Sensors | 2 sensors |
| Protection Level | IP65 |
| Body Material | ABS |
| Cable Length | 5 meters (16.4 ft) |
| Installation Method | Self-contained (Pole Mount, Wall Mount) |
| Certifications | CE, FCC, GS, LVD, ROHS, UL |
| Package Dimensions (L x W x H) | 39 cm x 26 cm x 9 cm |
| Package Weight | 3.0 kg |
Figure 9: Key specifications comparison.
Figure 10: Charging and runtime details.
User Tips
- Optimal Solar Charging: Always ensure the solar panel is positioned to receive maximum direct sunlight throughout the day for efficient charging and prolonged illumination at night.
- Strategic Placement: Utilize the intelligent mutual control feature by strategically placing multiple Intelamp solar lights within 66ft (20m) of each other to create a seamlessly illuminated path as you move.
- Adjustable Lighting: Take advantage of the 120° adjustable illumination direction to focus light precisely where it's needed most, enhancing security and visibility.
- Regular Cleaning: Periodically clean the solar panel and lampshade to prevent dust and debris buildup, which can reduce charging efficiency and light output.
Warranty and Support
Intelamp is committed to providing high-quality, long-lasting solar lights.
Returns
Free returns are available within 90 days of purchase. Please refer to your purchase platform's return policy for detailed instructions.
Customer Support
For any questions, technical assistance, or support regarding your Intelamp Solar Light, please contact the seller or refer to the support section on the platform where you made your purchase.
