Introduction
Thank you for choosing the Intelamp 4000LM Solar Light. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your solar light. Please read it thoroughly before use and retain it for future reference.
The Intelamp solar light is designed for outdoor use, featuring high brightness, motion sensing, and remote control capabilities. It is built with quality materials to ensure long life and reliable performance in various weather conditions.

Intelamp 4000LM Solar Light with included solar panel and remote control.
Safety Information
- Ensure the solar panel is installed in a location that receives direct sunlight for optimal charging.
- Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
- Keep the product away from open flames or extreme heat sources.
- Dispose of batteries according to local regulations.
- This product is designed for outdoor use and is IP65 waterproof, but avoid submerging it in water.
Package Contents
Please check the package to ensure all components are present:
- Intelamp Solar Light unit
- Solar Panel
- Remote Control
- Mounting hardware (screws, anchors)
- 16.4ft (5 meter) waterproof connection cable
- Instruction Manual (this document)
Setup and Installation
The Intelamp Solar Light offers flexible installation options and is designed for easy setup.
1. Choose an Installation Location
- Solar Panel Placement: The solar panel must be installed in a location that receives at least 5 hours of direct sunlight daily for optimal charging. Avoid shaded areas.
- Light Unit Placement: The light unit can be installed where illumination is needed. Consider an installation height of 10-12 feet (approximately 3-3.6 meters) for an optimal illumination range of up to 3000 sq ft.
- Cable Length: The included 16.4ft (5 meter) waterproof cable allows for flexible separation between the solar panel and the light unit, overcoming installation restrictions due to sunlight availability.

The solar light supports both pole mount and wall mount installations.

Optimal installation height and illumination range.
2. Mounting the Solar Panel and Light Unit
- Use the provided mounting hardware to securely attach the solar panel and light unit to your chosen surfaces (wall or pole).
- Ensure the solar panel is angled to maximize direct sunlight exposure throughout the day.
- Connect the solar panel to the light unit using the waterproof cable. Ensure the connection is secure to maintain IP65 waterproofing.

Multiple Intelamp solar lights can link together to illuminate a larger area.
Operating Instructions
The Intelamp Solar Light operates automatically and can be controlled via the included remote.
Automatic Operation
- The light will automatically charge during the day when the solar panel is exposed to sunlight.
- At night, the light will automatically turn on. It features a low brightness mode when no motion is detected, conserving power.
- When motion is detected by its dual sensors, the light will switch to high brightness (4000LM) for enhanced illumination.
- The dual wide-angle illumination faces provide a 240° lighting angle.

Motion detection activates 4000LM brightness with a wide illumination angle.
Intelligent Mutual Control (Linking Feature)
When one Intelamp solar light detects motion, it sends a signal to other Intelamp solar lights within a 66ft (20m) radius, causing them to also illuminate. This creates a continuous path of light as you move through your property.
Remote Control Functions
The remote control allows you to manually adjust settings. Refer to the remote control diagram (if provided in package) for specific button functions. Typical functions include:
- Power On/Off
- Brightness Adjustment
- Mode Selection (e.g., always on, motion sensor only, timed modes)
Video demonstrating the Intelamp Solar Light's features, including wide-angle illumination, efficient charging, and all-night lighting.
Maintenance
- Cleaning: Regularly clean the surface of the solar panel to ensure maximum sunlight absorption. Dust, dirt, and debris can reduce charging efficiency. Use a soft, damp cloth.
- Battery Care: The product uses a 20000mAh LiFePO4 battery. While designed for long life, extreme temperatures can affect battery performance. The design helps reduce the lamp's temperature in hot weather to promote battery longevity.
- Inspection: Periodically check the mounting hardware and cable connections for any signs of wear or damage. Ensure all connections remain secure and waterproof.
- Weather Resistance: The IP65 rating ensures protection against dust and water jets. While it can withstand rain, avoid prolonged submersion.

The IP65 rated design ensures the light is built to weather the storm.
Troubleshooting
- Light does not turn on at night:
- Ensure the solar panel is receiving sufficient direct sunlight (at least 5 hours daily).
- Check if the light unit is in a dark environment; it will not activate in daylight.
- Verify that the solar panel and light unit are correctly connected.
- Confirm the remote control hasn't turned the light off or set it to a specific mode.
- Light is dim or runtime is short:
- Clean the solar panel surface to remove any obstructions (dust, leaves, snow) that might hinder charging.
- Ensure the solar panel is optimally positioned for maximum sun exposure.
- Battery may not be fully charged due to insufficient sunlight or prolonged cloudy weather. Allow several sunny days for a full charge.
- Motion sensor not working:
- Ensure the sensor is not obstructed.
- Verify the light is in a motion-sensing mode (if applicable via remote).
- Check the range and angle of the sensor.
Specifications
| Feature | Detail |
|---|---|
| Model Number | YL005-18GP10 |
| Brand Name | intelamp |
| Power Source | Solar |
| Solar Panel | TOPCon 3rd generation, 20W, 24%+ charging efficiency |
| Battery Type | Lithium Battery (LiFePO4) |
| Battery Capacity | 20000 mAh |
| Full Charge Time | 5 hours (under direct sunlight) |
| Illumination Time | 12+ hours (all-night illumination) |
| Light Source | LED bulbs (210 pcs High Quality LED Beads) |
| Brightness | 4000 LM (6500K White Daylight) |
| Sensing | Dual Motion Sensors, Intelligent Mutual Control (66ft/20m radius) |
| Illumination Angle | 240° (dual wide-angle surfaces), 180° horizontal |
| Illumination Range | Up to 3000 sq ft |
| Protection Level | IP65 (Waterproof, Dustproof) |
| Body Material | ABS |
| Installation Method | Self-contained (Wall Mount, Pole Mount) |
| Cable Length | 16.4ft (5 meters) |
| Certifications | CE, FCC, GS, LVD, ROHS, UL |
User Tips
- For best performance, ensure the solar panel is cleaned regularly, especially after heavy rain or dusty conditions, to maintain charging efficiency.
- When installing multiple lights, strategically place them within 66ft (20m) of each other to utilize the intelligent mutual control feature for seamless illumination.
- Experiment with the remote control settings to find the optimal brightness and mode for your specific needs and location.
Warranty and Support
The Intelamp Solar Light comes with a 2-year warranty, ensuring quality and reliability. For any technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Intelamp customer support through your purchase platform or the official Intelamp website.

2 Years Warranty for your Intelamp Solar Light.