YOFIDRA 2200W 26MM Brushless Electric Hammer Impact Drill

Introduction

Thank you for choosing the YOFIDRA 2200W 26MM Brushless Electric Hammer Impact Drill. This powerful and versatile cordless tool is designed for heavy-duty drilling and chiseling tasks in various materials. Featuring a brushless motor, two working modes, and advanced safety features, it offers efficient and reliable performance for both home renovation and professional construction. Please read this manual carefully before use to ensure safe and optimal operation of your tool.

Safety Information

Always observe basic safety precautions when using electric power tools to reduce the risk of fire, electric shock, and personal injury.

• Wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.
• Ensure the work area is well-lit and clear of obstructions.
• Keep children and bystanders away while operating the tool.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Always disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.
• Secure the workpiece before drilling or chiseling.
• Avoid accidental starting. Ensure the switch is in the off-position before inserting the battery pack.
• Do not overreach. Keep proper footing and balance at all times.
• Maintain the tool with care. Keep cutting tools sharp and clean.
• Use the correct tool for your application. Do not force a small tool or attachment to do the job of a heavy-duty tool.

Package Contents

The standard package for the 'No Battery Set' includes the following items:

• 1 x Electric Hammer Impact Drill
• 1 x 8*150mm Drill Bit
• 1 x Plastic Storage Box

Additional accessories may be purchased separately, such as various SDS drill bits, chisels, and a 10mm three-jaw drill bit adapter.

Specifications

Setup

1. Battery Installation

This tool is designed to be compatible with Makita 18V batteries. To install the battery:

1. Ensure the tool is switched off.
2. Align the battery pack with the battery slot at the base of the tool.
3. Slide the battery into the slot until it clicks securely into place.

2. Handle Adjustment

The auxiliary handle can be rotated 360° for optimal control and comfort during operation. Loosen the handle grip, adjust to the desired position, and then tighten securely.

3. Accessory Installation

The tool features an SDS collet device for quick and secure bit changes. It also supports a 10mm chuck adapter for standard drill bits.

For SDS Bits/Chisels:

1. Pull back the chuck collar.
2. Insert the SDS bit or chisel into the chuck until it locks into place.
3. Release the collar and pull on the bit to ensure it is securely fastened.

For 10mm Chuck Adapter (for standard drill bits):

1. Attach the 10mm chuck adapter to the SDS collet device as you would an SDS bit.
2. Insert the desired standard drill bit into the 10mm chuck.
3. Use the chuck key to tighten the chuck jaws around the drill bit until it is firmly secured.

Operating Instructions

1. Mode Selection

The tool offers two working modes: Electric Hammer Mode and Electric Pick Mode. Use the mode selector switch located on the side of the tool to choose the appropriate mode for your task.

• Electric Hammer Mode (T): Provides better drilling efficiency for concrete, brick, and masonry.
• Electric Pick Mode (T with two arrows): Ideal for handy slotting and chiseling tasks, such as removing plaster or breaking small sections of concrete.

2. Powering On/Off

To turn the tool on, press the trigger switch. The speed is variable depending on the pressure applied to the trigger. To turn the tool off, release the trigger switch.

3. Usage Guidelines

• Drilling: For drilling into wood, metal, or plastic, use the 10mm chuck adapter with appropriate drill bits. Ensure the tool is in Electric Pick Mode (if no rotation-only mode is available, use the lowest impact setting or a dedicated drill).
• Hammer Drilling: For drilling into concrete, brick, or masonry, use SDS drill bits and select Electric Hammer Mode. Apply steady pressure and let the tool do the work.
• Chiseling/Demolition: For breaking or chiseling tasks, use SDS chisels and select Electric Pick Mode.

Safety Features

• Safety Clutch Protection: Automatically stops rotation if the bit gets jammed, preventing wrist injury and protecting the user from high torque kickback.
• Wrist Protection: Ergonomic design and safety features help reduce strain and protect the user's wrist during operation.

Maintenance

• Cleaning: Regularly clean the tool's ventilation openings to prevent overheating. Use a soft, damp cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
• Lubrication: The SDS chuck mechanism may require occasional lubrication with specialized grease to ensure smooth operation. Refer to a qualified technician if unsure.
• Storage: Store the tool in its plastic box in a dry, secure location, out of reach of children. Ensure the battery is removed if storing for extended periods.
• Inspection: Periodically inspect the power tool, battery pack, and charger for any damage. Do not use damaged components.

Troubleshooting

If you encounter issues with your YOFIDRA Electric Hammer Impact Drill, refer to the following common problems and solutions:

• Tool does not start: Ensure the battery pack is fully charged and correctly inserted. Check if the trigger switch is functioning properly.
• Reduced power or performance: The battery might be low on charge. Ensure the correct mode is selected for the task. The accessory might be worn or incorrect for the material.
• Excessive vibration or noise: Check that the accessory is correctly installed and not damaged. Ensure all external components are securely fastened.
• Bit getting stuck: This can activate the safety clutch. Reduce pressure and ensure the bit is suitable for the material.

For persistent issues or problems not listed here, please contact customer support.

User Tips

• Impact Force: The YOFIDRA Electric Hammer Impact Drill delivers a high impact frequency of 6400 IPM (Impacts Per Minute). This high impact force is crucial for efficient drilling and chiseling in tough materials like concrete and masonry.
• Battery Compatibility: While the tool is compatible with Makita 18V batteries, ensure you use genuine or high-quality compatible batteries for optimal performance and safety.
• Accessory Selection: Always choose the correct type and size of drill bit or chisel for the material you are working on. Using the wrong accessory can damage the tool or the workpiece.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's specific terms and conditions or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.