1. Introduction
Thank you for choosing the SoBuy FWT18 Wall Table. This versatile wall-mounted desk is designed to provide a functional workspace and storage solution for your living room, study, or children's room. Its modern design and practical features, including a cable management hole, make it an ideal addition to any contemporary space. Please read this manual carefully before assembly and use to ensure safe and correct installation and operation.
2. Safety Information
- Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and potential injury.
- Ensure the wall table is securely mounted to a suitable wall structure. Use appropriate wall anchors for your wall type (e.g., concrete, drywall, wood studs). If unsure, consult a qualified professional.
- Do not exceed the maximum load capacity of 30 kg (66 lbs). Overloading can cause the table to detach from the wall or collapse.
- Keep small parts and hardware out of reach of children during assembly to prevent choking hazards.
- Regularly check all fasteners and connections to ensure they remain tight. Retighten as necessary.
- Avoid placing hot items directly on the surface without protection.
- Do not climb or stand on the wall table.
3. Package Contents
Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x SoBuy FWT18 Wall Table (main components)
- 1 x Accessories Bag (containing screws, dowels, and other hardware)
- 1 x Instruction Manual (this document)
For non-visual users: Figure 1 displays an exploded diagram of the wall table, illustrating individual parts such as side panels, shelves, the main desk surface, and the back panel. Numbered steps indicate the order of assembly, showing how components connect using screws and dowels. The diagram also highlights the wall mounting points.
4. Specifications
| Feature | Detail |
|---|---|
| Model | FWT18-SCH (Black) |
| Material | MDF and Chipboard |
| Overall Dimensions (W x H x D) | Approx. 82 cm x 60 cm x 39 cm (32.3 in x 23.6 in x 15.4 in) |
| Weight | Approx. 14 kg (30.9 lbs) |
| Maximum Load Capacity | Up to 30 kg (66 lbs) |
| Features | Integrated cable management hole, multiple storage compartments |
| Package Dimensions (L x W x H) | Approx. 90 cm x 45 cm x 13 cm (35.4 in x 17.7 in x 5.1 in) |
| Package Weight | Approx. 13.4 kg (29.5 lbs) |
For non-visual users: Figure 2 illustrates the precise measurements of the wall table. The overall width is 82cm. The height is 60cm. The depth is 39cm. The main desk surface is 79cm wide and 47cm deep. The top shelf is 82cm wide and 18cm deep. The side shelves are 14cm wide and 30cm high on the left, and 14cm wide on the right with varying heights. The bottom compartments are 47cm wide and 10cm high, and 14cm wide and 10cm high.
5. Assembly Instructions
Assembly is required for this wall table. Please follow these steps carefully. It is recommended to have two people for assembly and wall mounting.
Tools Required (Not Included):
- Phillips head screwdriver
- Drill (for wall mounting)
- Drill bits appropriate for your wall type and anchors
- Level
- Measuring tape
- Pencil
Step-by-Step Assembly:
- Unpack and Identify Parts: Carefully unpack all components and hardware. Refer to Figure 1 (Exploded View) to identify each part and ensure nothing is missing.
- Assemble Side Panels: Attach the smaller internal shelves and support panels to the main side panels using the provided screws and dowels. Ensure all connections are snug.
- Attach Main Desk Surface: Secure the main desk surface to the assembled side panels and internal supports. Pay attention to the orientation to ensure the cable hole is positioned correctly.
- Install Top Shelf and Back Panel: Connect the top shelf and the back panel to complete the main structure of the table.
- Wall Mounting Preparation:
- Determine the desired height and location for your wall table. Use a level and pencil to mark the mounting points on the wall. Refer to the assembly diagram for precise hole spacing.
- Drill pilot holes at the marked locations using a drill bit suitable for your wall type and the provided wall anchors.
- Insert the wall anchors into the drilled holes.
- Mounting the Table: With assistance, carefully lift the assembled wall table and align the mounting holes on the table with the installed wall anchors. Secure the table to the wall using the appropriate screws. Ensure the table is level and firmly attached before use.
- Final Checks: Double-check all screws and connections to ensure they are tight and secure.
6. Usage
The SoBuy FWT18 Wall Table is designed for various uses:
- Workspace: Use the main desk surface for writing, working on a laptop, or other tasks.
- Storage: Utilize the multiple shelves and compartments to store books, office supplies, decorative items, or other personal belongings.
- Cable Management: The integrated cable hole allows for neat routing of power cords and other cables, keeping your workspace tidy.
For non-visual users: Figure 3 shows a close-up of the circular cable management grommet on the main desk surface, with a white cable passing through it, demonstrating its function for tidying wires.
7. Maintenance
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the MDF/chipboard material.
- Fasteners: Periodically check all screws and connections for tightness and retighten if necessary to maintain stability.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table feels wobbly after assembly. | Screws or wall mounts are not fully tightened. | Ensure all assembly screws are tightened. Verify wall anchors are secure and mounting screws are fully engaged. |
| Parts do not fit together. | Incorrect orientation of parts or wrong parts used. | Refer to Figure 1 (Exploded View) and the step-by-step instructions to ensure correct part identification and orientation. |
| Table is not level on the wall. | Mounting holes were not marked level. | Remove the table, re-mark the mounting points using a level, and re-drill if necessary. |
| Missing hardware or damaged parts. | Packaging error or transit damage. | Contact customer support with details of the missing/damaged parts. |
9. User Tips
- Wall Type: Always use wall anchors appropriate for your specific wall material (e.g., concrete, brick, drywall with studs, hollow wall). Using the wrong anchors can compromise stability.
- Cable Management: Utilize the cable hole to route power cords for laptops, lamps, or chargers, keeping your desk surface clear and organized.
- Personalization: The open shelves are perfect for displaying small plants, photos, or decorative items to personalize your workspace.
10. Warranty and Support
For any questions, concerns, or support regarding your SoBuy FWT18 Wall Table, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty claims.
