TWOTREES RS-200

Contents

Twotrees RS-200 Face Milling Device Router Sled User Manual

Model: RS-200

Brand: TWOTREES | Manufacturer: Shenzhen Two Trees Technology Co., Ltd.

1. Product Overview

The Twotrees RS-200 is a versatile Face Milling Device Router Sled designed for woodworking, specifically for flattening and smoothing wooden panels. It functions as a 3-axis CNC router for precise engraving and cutting tasks.

Twotrees RS-200 Wood Planer Router Sled with engraving area dimensions
Figure 1: Twotrees RS-200 Wood Planer Router Sled. Engraving Area: 800mm x 1780mm x 80mm.
Twotrees RS-200 Router Sled on a large wooden panel, illustrating large project capability
Figure 2: The RS-200 is designed for large projects with an engraving stroke of 800x1780x80mm.
Comparison of wood planed by RS-200 versus other methods, highlighting industrial grade accuracy
Figure 3: Industrial Grade Accuracy. The RS-200 achieves an operation error of up to 0.05mm, making it 10 times more accurate than manual methods.

2. Safety Warnings

  • Laser Radiation Hazard: This device contains a high-power laser module. Direct or indirect exposure to the laser beam can cause severe eye damage or skin burns. Always wear laser safety goggles matched to the 445±nm wavelength during operation.
  • Fire and Smoke Hazard: The laser processing process generates high temperatures, posing a high risk of igniting materials. Ensure a fire extinguisher is readily available. Processing certain materials (e.g., PVC, fluorinated plastics) is strictly prohibited due to toxic fumes and fire risk.
  • Prohibited Actions: Unauthorized disassembly of the laser module, electrical circuit modification, or removal of safety interlocks is strictly prohibited and voids the warranty. Operation and maintenance of this device are strictly prohibited for untrained personnel.
  • Environmental Requirements: The working environment should be well-ventilated to avoid dust accumulation and dissipate fumes. Ensure at least 1m of operating space is reserved around the equipment.
  • Device Protection: Do not operate at full power continuously beyond the maximum continuous duty time specified in the product manual to prevent overheating and damage.

3. Setup Instructions

3.1. Assembly

The RS-200 Router Sled requires assembly. Please refer to the detailed assembly video for step-by-step instructions. Ensure all components are securely fastened before use.

Video 1: Product Assembly and Operation Demonstration. This video provides a visual guide for assembling the RS-200 and demonstrates its basic operation.

3.2. Environmental Preparation

  • Place the device on a stable, well-leveled worktable.
  • Ensure adequate ventilation to prevent dust and fume buildup.
  • Maintain at least 1 meter of clear space around the equipment for safe operation.

3.3. Software Connection

  • Connect the device to a computer via a USB cable.
  • Install the necessary USB drivers if prompted by your operating system or software.
  • Ensure the USB cable is undamaged and securely connected.

3.4. Material Fixturing and Focusing

  • Securely and evenly fix the workpiece onto the worktable to prevent movement during operation.
  • Adjust the laser focus precisely to the material surface for optimal engraving/cutting results.

3.5. Parameter Setup

  • In the control software, set appropriate power, speed, and pass count according to the material type and thickness.
  • Perform a test run on a scrap piece of the same material to verify settings before starting the main project.

4. Operating Instructions

4.1. Core Functions

  • Engraving: Enables permanent engraving of graphics, text, and patterns on various materials.
  • Cutting: Capable of precise cutting of thin non-metallic materials.

4.2. Starting Processing

  1. Ensure the protective cover is closed.
  2. Activate the exhaust system to manage fumes and dust.
  3. Send the processing command from the control software.

4.3. Ending Operation

  1. After processing completes, wait until the device has fully stopped.
  2. Allow the laser head to cool completely before handling or moving the workpiece.
Close-up of the RS-200 with dual-port power and dust collection hoses, emphasizing 95% dust-free operation
Figure 4: 95% Dust-Free Operation with Dual-Port Power for a cleaner workspace and healthier crafting.
Detail of the Y-Axis Brake Module and Graduated Scale on the RS-200, showing dynamic lock for precision
Figure 5: Dynamic Lock Eliminates Errors. The Y-Axis Brake Module and Graduated Scale ensure locked precision for flawless repetition.
Four images showing features of the RS-200: handle, height adjustment, index pins, and trimmer suitability
Figure 6: Easy, Effortless, Precise. Features include a handle that reduces thrust by 30%, quick height adjustment, physical locking of index pins, and suitability for 95% of trimmers.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your RS-200. Always disconnect power before performing any maintenance.

  • Cleaning: Regularly clean the device, especially the laser lens and work area, to prevent dust and debris accumulation. The integrated dust collection system helps maintain a cleaner workspace.
  • Lubrication: Periodically lubricate moving parts as recommended in the full PDF manual to ensure smooth operation.
  • Inspection: Routinely inspect all cables, connections, and mechanical components for wear or damage. Replace any worn parts immediately.
  • Software Updates: Keep your control software updated to the latest version for improved performance and features.

For detailed maintenance procedures, please refer to the official user manual PDF: Twotrees RS-200 User Manual (PDF).

6. Troubleshooting (FAQ)

Q1: What should I do if engraving/cutting depth is insufficient?
A: Please check the following sequentially: 1) Whether the laser focus is precisely aligned to the material surface; 2) Adjust the power and speed settings in the software.
Q2: Why are engraving edges unclear or charred?
A: This is typically caused by excessive power or insufficient speed. Reduce the power percentage or increase the travel speed in the software.
Q3: Why is the device not recognized after connecting to the computer?
A: Please verify: 1) Whether the USB cable is undamaged and securely connected; 2) Whether the device's USB driver is correctly installed.
Q4: Why does the laser head emit no light?
A: Please check: 1) Whether all power connections are secure and functional; 2) Whether the “Laser Enable" option is activated in the control software.
Q5: How thick a material can be cut?
A: Cutting capability depends on laser power, material properties, and focal length. For common 3 mm basswood or acrylic sheets, the device can achieve effective cuts. Experimentation with settings is recommended for other materials.

7. Specifications

Feature Specification
Model Number RS-200
Type Bench Planer, Face Milling Device, Router Sled
Main Color Black + Blue + Red
Main Material Aluminum + Sheet Metal + CNC
Product Size 1171mm X 2122mm x 240mm
Working Range (Engraving Area) 800mm X 1780mm X 80mm
Net Weight 17kg
Gross Weight 19.6KG
Packaging Size 1115x375x235mm
Motion Structure Type XY
Core Technology High-performance 445 nm blue laser
Software Compatibility Compatible with mainstream control software
Certification CE (CE-MD/CE-RED/ROHS/FCC-Sdoc/FCC-ID)
Device Characteristics Compact design suitable for desktop use
Space Requirements At least 1m of operating space around the equipment
Ventilation Conditions Good ventilation system to avoid dust accumulation
Detailed features of the RS-200 including carving area, Z-axis height adjustment, vacuum cover, profile scale, PVC soft plastic, paintbrush brush, booster foot, Y-axis wheel integration, trimmer mount, X-axis handle, and indexing pin.
Figure 7: Detailed features and components of the RS-200, including its larger carving area, Z-axis height adjustment, vacuum cover, profile scale, PVC soft plastic, paintbrush brush, booster foot, Y-axis wheel integration, trimmer mount, X-axis handle, and indexing pin.

8. User Tips

  • For best results, always use sharp milling cutters appropriate for your material.
  • When working with new materials, start with conservative power and speed settings and gradually increase them until the desired effect is achieved.
  • Regularly check the tightness of all screws and connections, especially after extended use, to maintain precision.
  • Keep your workspace tidy and free of obstructions to ensure smooth operation of the router sled.

9. Warranty & Support

9.1. Warranty Policy

This product is covered by a limited warranty valid for 12 months from the date of receipt. The warranty covers failures arising from material or manufacturing defects.

9.2. Technical Support

For assistance, please contact us via:

  • After-sales email: service@twotrees3d.com
  • WhatsApp: +8619879199817

9.3. Disclaimer

By using this product, the user acknowledges and agrees to the following:

  1. The manufacturer and seller shall not be liable for any direct or indirect damages.
  2. Failure to operate, maintain, or store the device in accordance with the provided instructions may void the warranty and absolve the manufacturer/seller of liability.
  3. Unauthorized modification of the device, or use of non-OEM parts, is not covered by warranty.
  4. Use of the device outside its intended purpose, or processing of prohibited materials, is at the user's own risk.
  5. Installation, commissioning, or repair performed by personnel not authorized by the manufacturer is not covered by warranty.
  6. Damage caused by force majeure or unforeseen events is not covered.
  7. Normal wear and tear (e.g., natural power decay of the laser module) is not covered.

© 2024 TWOTREES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.