1. Introduction
This manual provides instructions for the KingMa KM-RC03 Wireless Bluetooth Remote Control, designed for use with DJI Action5Pro, Action4, and Osmo 360 action cameras. Please read this manual carefully before using the product to ensure proper operation and to maximize its features.
2. Package Contents
Ensure all items are present in the package:
- 1 x KingMa KM-RC03 Wireless Bluetooth Remote Control
- 1 x USB-A to USB-C Charging Cable
- 1 x Lanyard
- 1 x User Manual
3. Product Overview
The KingMa KM-RC03 is a compact and lightweight remote control designed for seamless operation of your DJI action camera. It features a simple button layout for easy photo and video capture, and supports wake-up and sleep modes for your camera.
Button Functions:
- 1. Power Button: Turns the remote on/off.
- 2. LED Indicator: Displays status (pairing, connected, charging).
- 3. Camera Button (Shutter): Captures photos or starts/stops video recording.
- 4. Sleep Button (S): Puts the camera to sleep or wakes it up.
- 5. Mode Switch Button (M): Switches between photo and video modes.
- 6. Type-C Port: For charging the remote control.
4. Setup and Pairing
Follow these steps to pair your KingMa KM-RC03 remote control with your DJI action camera:
- Prepare your Camera:
- On your DJI camera (Action5Pro, Action4, or Osmo 360), swipe down on the screen to open the Control Center.
- Tap on "Settings".
- Navigate to "Bluetooth Remote Control" or "Bluetooth Remote".
- Activate the Remote:
- Slide the power switch on the remote control to turn it on. The green LED indicator will flash.
- Enter Pairing Mode:
- Press and hold both the Camera Button (Shutter) and the Sleep Button (S) simultaneously until the blue and green LED lights on the remote flash alternately. This indicates the remote is in pairing mode.
- Complete Pairing:
- A pairing code will appear on your camera's screen. Tap "Accept" on the camera to confirm the connection.
- Once connected, the LED indicator on the remote will show a solid blue light, and the camera will confirm "Connection successful".
Note: If the connection fails, please reset the camera and repeat the steps above. After the initial setup, the remote will automatically reconnect to your camera next time.
Video Tutorial:
5. Operating Instructions
5.1 Power On/Off Camera
- To power the camera on or off using the remote, press and hold the Sleep Button (S).
5.2 Switching Modes (Photo/Video)
- Press the Mode Switch Button (M) to toggle between Photo and Video modes on your connected camera.
5.3 Capturing Photos and Videos
- In Photo Mode: Press the Camera Button (Shutter) to take a picture.
- In Video Mode: Press the Camera Button (Shutter) to start recording. Press it again to stop recording.
6. Charging the Remote Control
The KingMa KM-RC03 remote control features a rechargeable battery. To charge:
- Connect the provided USB-A to USB-C charging cable to the Type-C port on the remote control (6) and to a standard USB power source.
- A full charge takes approximately 2 hours and provides up to 8 hours of continuous use.
- The LED indicator will show charging status.
7. Maintenance
- Keep the remote control dry and clean. Avoid exposure to extreme temperatures or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
- Charge the remote regularly, even if not in use, to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not pairing with camera. | Incorrect pairing procedure, remote or camera not in pairing mode, low battery. |
|
| Remote not responding after pairing. | Out of range, camera in sleep mode, interference. |
|
| Short battery life. | Incomplete charging, aging battery. |
|
9. Specifications
| Feature | Detail |
|---|---|
| Product Name | Wireless remote control |
| Model | KM-RC03 |
| Wireless Communication | Bluetooth 5.0 |
| Compatible Devices | DJI Action5Pro, Action4, Osmo 360 |
| Transmission Distance | Up to 15 meters (unobstructed) |
| Battery Capacity | 3.7V 120mAh |
| Charging Port | Type-C 5V |
| Charging Time | Approx. 2 hours |
| Operating Time | Up to 8 hours (continuous use) |
| Dimensions | 89.7 x 27.7 x 11.7 mm (3.53 x 1.09 x 0.46 inches) |
| Item Weight | Approx. 18g (0.635 ounces) |
| Material | Plastic |
| Support APP | No |
10. User Tips
- For optimal performance, ensure a clear line of sight between the remote and the camera, especially at longer distances.
- The remote's compact size makes it ideal for attaching to lanyards or keychains for quick access during activities like cycling or vlogging.
- Remember to fully charge the remote before extended use to avoid interruptions during shooting.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact KingMa Official Store customer service through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.
