FENVI FV-AX3000WR

Contents

FENVI AX3000 WiFi6 Gigabit Router User Manual

Model: FV-AX3000WR

1. Product Overview

The FENVI AX3000 WiFi6 Gigabit Router is a high-performance dual-band wireless router designed for home use, offering speeds up to 3000Mbps. It features Wi-Fi 6 (802.11AX) technology, a Qualcomm dual-core chip, and supports EasyMesh for seamless whole-home coverage.

FENVI AX3000 WiFi6 Dual Band 3000Mbps Router with Qualcomm Dual Core Chip
FENVI AX3000 WiFi6 Dual Band 3000Mbps Router
FENVI AX3000 WiFi 6 features including WPA3, Gigabit, IPv6, OFDMA MU-MIMO
Key Features of FENVI AX3000 WiFi 6 Router

2. Safety & Warnings

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Setup Guide

3.1. Confirm Product List

Before proceeding with the setup, ensure all components are present in the package:

  • 1x AX3000 Router
  • 1x Ethernet cable (1-2m)
  • 1x Power adapter
  • 1x Quick installation Guide

3.2. Hardware Connection

  1. Insert the power adapter into the router's DC power interface and plug the other end into a power socket.
  2. Connect one end of the Ethernet cable to the WAN port of the AX3000 router and the other end to your modem or superior router. Wait for the indicator light to turn on (continuous green).
  3. The indicator light changes from flashing red to continuously green, indicating a successful connection.

3.3. Mesh Instruction Settings

Before setting up Mesh, ensure all sub-routers are of the same brand as the main router and support Mesh networking functionality.

  1. Connect the sub-router to a power source (this can be done after initial configuration).
  2. Press the Mesh button on the main router and at the same time press the Mesh button on the sub-router (just press the mesh button once).
  3. Wait for the indicator light to change from flashing red to continuously green. If pairing is successful, the main and sub-routers will continue to flash red to stay in place.

3.4. Adjusting Sub-Router Position

  1. Move the sub-router to the area where the signal needs to be expanded (it is recommended to place it in an open area, away from obstacles and metal objects).
  2. Ensure that the sub-router indicator light is displaying normally (as green continuously on).

3.5. Reset Router

  1. Find the reset button, usually located on the back of the router and labeled as 'Reset' or a small hole.
  2. Long press the reset button and observe the indicator light.
  3. The indicator light starts flashing red, then turns off, and then lights up again to indicate a successful reset.
Detailed setup instructions for FENVI AX3000 router, including product list, hardware connection, mesh settings, and reset procedure.
Detailed Setup and Mesh Configuration

4. Operating Modes

4.1. Router/AP Mode

The device can operate as a standard router, converting your wired network into a wireless one, or as an Access Point (AP) to extend an existing network.

4.2. EasyMesh Mode

Utilize the EasyMesh function to create a high-speed, whole-home Wi-Fi experience with a single Wi-Fi name. This mode allows multiple AX3000 units to work together seamlessly.

Diagrams illustrating Router/AP Mode and Everything Mesh Mode connections for the FENVI AX3000 router.
Router/AP Mode and EasyMesh Mode Diagrams

4.3. Wireless Security

The router supports WPA3 encryption for enhanced privacy protection, helping to prevent unauthorized access to your network.

4.4. WPS Functionality

The device supports WPS (Wi-Fi Protected Setup) for easy and secure connection of compatible devices to your wireless network.

5. Maintenance

  • **Heat Dissipation:** The router features bottom heat dissipation design for efficient cooling. Ensure adequate airflow around the device to maintain optimal performance.
  • **Environmental Conditions:** Do not expose the device to water or moisture. Operate within the specified working temperature and humidity ranges.
  • **Cleaning:** Use a soft, dry cloth to clean the router. Do not use liquid cleaners or aerosols.

6. Troubleshooting

6.1. Cannot Find the Sub Router During Mesh Pairing

If the sub-router is powered on but does not automatically enter pairing mode, try resetting it by long-pressing the reset button until the indicator light flashes red, turns off, and then lights up again.

6.2. Network Speed Decreases After Mesh Networking

If you experience a decrease in network speed after Mesh networking, ensure that the sub-routers are placed within an optimal range of the main router. Obstacles and distance can affect signal strength. Also, verify that all routers are connected via Ethernet cables where possible for the best performance.

For more detailed troubleshooting, please refer to the full product manual (PDF) or contact customer support.

7. Specifications

Attribute Value
Model NameFV-AX3000WR
Brand NameFENVI
Wireless Communication Standard802.11.ax
Frequency Band ClassDual-Band
Wi-Fi Supported Frequency2.4G & 5G
2.4G Wi-Fi Transmission Rate574 Mbps
5G Wi-Fi Transmission Rate2402 Mbps (Total 3000Mbps)
Wireless Transmission Rate3000M
Max. LAN Data Rate3000Mbps
Wired Transfer Rate10/100/1000Mbps
WAN Ports1 x 10/100/1000Mbps
LAN Ports3 x 10/100/1000Mbps
Antenna Gain4*5dBi external high-gain antennas
Memory256MB
Flash Memory128MB
Maximum Transmit Power20dbm
Minimum Receiving Sensitivity-96dbm
Working Frequency (2.4GHz)2.412GHz-2.472GHz
Working Frequency (5.8GHz)5.180GHz-5.825GHz
FunctionFirewall
With Modem FunctionNo
Supports WPSYes
Supports WDSNo
Number of USB InterfacesNone
TypeWired & Wireless
ApplicationHome
Power AdapterDC12V, 1A
Maximum Power Consumption12W
Installation MethodsTable setting and wall-mounted
IP Protection LevelIP31
Working Temperature0 ℃ ~ 40 ℃
Storage Temperature-40 ℃ ~ 70 ℃
Working Humidity10% ~ 90%RH Non-condensing
Storage Humidity5% ~ 90%RH Non-condensing
CertificationCE
OriginMainland China
Product dimensions, detailed specifications table, and CE certification for the FENVI AX3000 router.
Product Dimensions and Specifications

8. User Tips

  • **Optimal Placement:** For best signal coverage, place the router in a central location, away from obstructions and metal objects.
  • **Leverage Dual Bands:** The 5.8GHz band offers strong anti-interference capabilities and higher speeds, ideal for bandwidth-intensive tasks like 4K streaming and gaming. The 2.4GHz band provides a longer transmission distance, suitable for wider coverage.
  • **EasyMesh for Whole Home:** Utilize the EasyMesh function to create a unified network with multiple routers for seamless roaming and extended coverage throughout your home.
  • **Gigabit Performance:** Connect devices requiring high-speed and stable connections (e.g., desktop PCs, smart TVs) to the Gigabit Ethernet ports for optimal performance.
  • **Stay Updated:** Obtain the corresponding driver from the official website if prompted, especially before first use, to ensure compatibility and optimal performance.
  • **Monitor Status:** The work indicator light provides a quick visual cue of the equipment's working status.

9. Warranty & Support

9.1. Manufacturer Information

Manufacturer: CN-401 North Block, Beier Road, Hi-tech Industrial Park, Bantian Subdistrict, Longgang District, Shenzhen, Guangdong Province, China

Importer: Shenzhen Fenvi Technology Co., LTD, Ltd., 613B, Comprehensive Building 1, High-tech Industrial Park, Beier Road, Bantian Community, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, China

9.2. EU Authorized Representative

Representative: Wincomply Service Germany GmbH, Friedrich-Ebert-Anlage 36, eurep@wincomply.com, +49-030800982701

9.3. Additional Resources

A detailed user manual in PDF format is available for download. You can view the User Manual (PDF) for more comprehensive information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.