1. Introduction
The EPOMAKER G84 HE is a high-performance 75% ANSI US Layout mechanical keyboard designed for gamers, professionals, and enthusiasts. It features advanced Hall Effect magnetic switches, tri-mode connectivity (Wired, 2.4Ghz Wireless, Bluetooth), Dynamic Key Rollover (DKS), Snap Key (SOCD) support, dynamic RGB backlighting, and durable PBT keycaps. This manual provides essential information to help you get the most out of your keyboard.
2. Setup
2.1 Unboxing and Package Contents
Carefully unbox your EPOMAKER G84 HE keyboard. The package should contain the following items:
- 1x G84 HE 75% Mechanical Keyboard
- 1x Multilingual Manual
- 1x Detachable USB A-to-C Cable
- 1x 2.4Ghz Wireless Dongle
- 1x Switch Puller
- 3x Extra Switches
2.2 Connectivity Options
The G84 HE supports three connection modes:
- Wired Mode: Connect the keyboard directly to your device using the provided USB A-to-C cable.
- 2.4Ghz Wireless Mode: Plug the 2.4Ghz wireless dongle into your device's USB port. The dongle can be stored conveniently under the keyboard's kickstand when not in use.
- Bluetooth Mode: Pair the keyboard with your device via Bluetooth.
A physical switch on the keyboard allows for easy swapping between Mac and Windows compatibility modes.
2.3 Charging
The keyboard is equipped with an 8000mAh battery. To charge, connect the keyboard to a computer's USB port using the provided USB A-to-C cable.
Charging Safety Warning: Always use a computer USB port for charging directly. Using other power sources may cause battery damage.
3. Operating Instructions
3.1 Key Functions and Advanced Features
- Adjustable Actuation: The Hall Effect magnetic switches allow for adjustable trigger and release travel from 0.1mm to 3.3mm with 0.01mm precision. This can be configured using the EPOMAKER software.
- Dynamic Key Rollover (DKS): This feature allows a single keypress to execute up to 4 commands based on the depth of the press, providing enhanced control in gaming.
- Snap Key (SOCD): The SOCD logic intelligently prioritizes the last input when conflicting directional inputs are pressed simultaneously, preventing neutral blocks and enabling precise movements.
- Polling Rate & Latency: The keyboard boasts an 8000Hz polling rate in 2.4Ghz wireless and wired modes, and 125Hz in Bluetooth mode. Latency is as low as 0.125ms in wired and 2.4Ghz modes, and 8ms in Bluetooth mode.
- Anti-Ghosting: The G84 HE supports N-Key Rollover (NKRO) and software calibration for anti-ghosting, ensuring all your keypresses are registered accurately.
3.2 RGB Backlight Control
The G84 HE features dynamic RGB backlighting with shine-through PBT keycaps. You can customize the lighting effects using the following shortcuts or the EPOMAKER software:
- FN + Backspace: Toggle Light Effect
- FN + Del: Toggle Side Light
- FN + \|: Toggle Color
- FN + Home: Turn On/Off Light
3.3 Software Customization (EPOMAKER 3.0 Driver)
The EPOMAKER 3.0 Driver software allows for extensive customization of your keyboard on both Windows and Mac systems. With the software, you can:
- Customize key functions and remap key layouts.
- Adjust actuation travel for individual keys.
- Record and assign macros for repetitive actions.
- Design personalized backlight effects.
- Utilize advanced functions like SOCD and DKS with real-time visual feedback.
4. Maintenance
4.1 Cleaning Your Keyboard
To maintain your keyboard's appearance and functionality:
- Use a soft, lint-free cloth to wipe down the keycaps and case.
- For deeper cleaning, you can use a can of compressed air to remove dust and debris from between the keys.
- Avoid using harsh chemicals or abrasive materials, as these can damage the finish or keycap legends.
4.2 Switch and Keycap Replacement
The G84 HE features hot-swappable North-Facing Magnetic Switches, allowing you to easily replace switches without soldering. The included switch puller can be used for this purpose. The PBT keycaps are durable and use a double-shot technique for long-lasting legends.
4.3 Battery Care
To prolong battery life, ensure you follow the charging safety warning mentioned in Section 2.3. Avoid overcharging or completely draining the battery frequently.
5. Troubleshooting
If you encounter any issues with your EPOMAKER G84 HE keyboard, please refer to the following common troubleshooting steps:
- Connectivity Issues: Ensure the keyboard is properly connected in wired mode, the 2.4Ghz dongle is securely plugged in, or Bluetooth pairing is successful. Try restarting your device or the keyboard.
- Keys Not Responding: Check if the keyboard is powered on and connected. If in wireless mode, ensure the battery has sufficient charge. For specific key issues, try swapping the switch with one of the extra switches provided.
- Backlight Problems: Use the FN key combinations (FN+Backspace, FN+Del, FN+\, FN+Home) to cycle through lighting effects or turn the backlight on/off. If issues persist, check the EPOMAKER software for lighting settings.
- Software Not Detecting Keyboard: Ensure the EPOMAKER 3.0 Driver software is up-to-date and running. Try connecting the keyboard in wired mode for initial software detection.
For more detailed troubleshooting or persistent issues, please consult the official EPOMAKER website or contact their customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | EPOMAKER |
| Model | G84 HE |
| Layout | 75% Layout, QWERTY ANSI US Layout |
| Number of Keys | 84 Keys |
| Battery | 8000mAh (2*4000mAh) |
| Battery Life | 30 Hours (Backlight On), 160 Hours (Backlight Off), 800 Hours (Stand-by) |
| Connectivity | 2.4Ghz Wireless / Bluetooth / USB A-C |
| Compatibility | Mac / WIN / Android (Physical Switch for Mac/WIN swap) |
| Keyboard Dimensions | 34.7cm (Length) x 14.6cm (Width) x 4.2cm (Height) |
| Keyboard Weight | 1kg |
| Front Height | 1.85cm |
| Typing Angle | 6 degrees, 8 degrees, and 10.5 degrees |
| Case Material | ABS Plastic |
| Plate Material | PC Plate |
| Flex-Cut | Yes |
| Stabilizers | Plate-Mounted Stabilizer |
| Mounting Structure | Gasket-Mount |
| Sound Dampening | PORON Sandwich Foam, IXPE Switch Pad, Sound Enhancement Pad, PORON Switch Socket Pad, Bottom Silicone |
| Keycaps Profile | Cherry Profile |
| Keycaps Material | PBT Plastic |
| Keycaps Manufacturing Technique | Double-Shot |
| Switch Type | North-Facing Magnetic Switch (Hall Effect) |
| Hot Swappable | Yes, with North-Facing Magnetic Switches |
| RGB | Yes, with per-key north-facing RGB LEDs |
| Polling Rate | 8,000Hz (2.4G & Cable Mode), 125Hz (Bluetooth Mode) |
| Latency | 0.125ms (Wired & 2.4Ghz Wireless Mode), 8ms (Bluetooth Mode) |
| Anti-Ghosting | NKRO support and software calibration |
| Programming Software | EPOMAKER software for WIN and Mac devices |
| Hall Effect Dead Zone | Zero Dead Zone |
| Hall Effect Snap Key (SOCD) | Yes |
6.1 Epomaker Duskrise Magnetic Switch Specifications
| Feature | Detail |
|---|---|
| Switch Type | Hall Effect Magnetic Switch |
| Initial Force | 30gf Min |
| Bottom-out Force | 55gf Max |
| Initial Magnetic Flux (if PCB=1.6mm) | 95±15GS |
| Bottom Magnetic Flux (if PCB=1.6mm) | 580±50GS |
| Trigger Travel | Adjustable per 0.01mm, from 0.1mm to 3.3mm |
| Total Travel | 3.3±0.1mm |
| Top Case | PC, Transparent |
| Bottom Case | PA66, Red |
| Stem/Kone | POM, Yellow |
| Light Diffuser/Light Pipe | Yes, with transparent acrylic light diffuser |
7. User Tips
- Explore Customization: Dive into the EPOMAKER 3.0 Driver software to fully customize your keyboard's performance, from key remapping to personalized RGB effects and precise actuation adjustments.
- Optimize for Gaming: Experiment with DKS and SOCD settings in the software to gain a competitive edge in fast-paced games. Adjust actuation points to match your playstyle.
- Battery Management: For extended wireless use, consider turning off the RGB backlight when not needed to significantly increase battery life.
8. Warranty and Support
For warranty information, technical support, or any further inquiries, please refer to the multilingual manual included in your package or visit the official EPOMAKER website. Keep your purchase receipt for warranty claims.