ASMAX T10

Contents

ASMAX Smart Air Pump T10 User Manual

Model: T10 | Brand: ASMAX

Introduction

Thank you for purchasing the ASMAX Smart Air Pump T10. This portable electric air compressor is designed for efficient and convenient inflation of various items, including car, motorcycle, and bicycle tires, as well as sports balls. It features a powerful 7500mAh battery, real-time pressure monitoring, automatic shut-off, and multiple inflation modes. Equipped with a high-performance motor and intelligent cooling system, it effectively prevents overheating during use and delivers a fast inflation rate of 26L/min, quickly inflating your tires with a maximum pressure of 160psi. Please read this user manual carefully before using the air pump and keep it for future reference.

Video: Overview of the ASMAX Smart Air Pump T10 features and usage scenarios.

Safety Precautions

  • Do not leave the device unattended during inflation.
  • Keep the device away from flammable and explosive materials.
  • Avoid moisture and prevent it from falling.
  • Do not store the product in places that are too cold, hot, or humid.
  • The product contains a built-in lithium battery. Do not throw the product into fire or dispose of it randomly.
  • Keep the product out of reach of children.

High-Temperature Safety Precautions

When the air pipe is unscrewed after prolonged use, both the air pipe and its connector may become hot. Avoid touching them with your hands for extended periods.

Package Contents

ASMAX Smart Air Pump T10 and its accessories

Image: ASMAX Smart Air Pump T10 with included accessories.

  • 1 x ASMAX Smart Air Pump T10
  • 1 x Type-C Charging Cable
  • 1 x Fast-connected Air Pipe with Schrader Valve
  • 1 x Air Inflation Needle for Balls
  • 1 x User Manual
  • 1 x Presta Valve Adapter
  • 1 x Storage Bag
  • 1 x General Connector

Product Overview

Front view of ASMAX Smart Air Pump T10

Image: Front view of the ASMAX Smart Air Pump T10, highlighting the display and controls.

Display and Controls

  • Real-time Air Pressure: Displays current pressure.
  • Unit Display: Shows selected pressure unit (PSI, BAR, KPA, Kg/cm²).
  • Power Level Display: Indicates battery charge.
  • Preset Air Pressure: Shows the target pressure value.
  • Mode Selection: Allows choosing inflation modes.
  • Preset + Button: Increases preset pressure.
  • LED Lighting Button: Controls the LED light.
  • Power Button: Turns the device on/off.
  • Preset - Button: Decreases preset pressure.
  • Mode Selection/Unit Button: Switches between modes and pressure units.

Ports and Interfaces

  • Type-C Input: For charging the device.
  • LED Light: Provides illumination.
  • USB Output: Functions as a power bank.
  • USB Silicone Cover: Protects USB ports.
  • Air Pipe Interface: Connection point for the inflation hose.

Specifications

Specifications and package contents of the ASMAX T10 air pump

Image: Detailed specifications and included items for the ASMAX Smart Air Pump T10.

FeatureDetail
Product NameSmart Air Pump
Product ModelT10
Product Size168 x 68.5 x 46 mm (6.61 x 1.81 x 2.7 inches)
Net Weight550g (0.55kg)
Inflation Pressure2~160 PSI / 0.1~11 BAR
Working Temperature-10~45°C
Battery Power27.75 Wh / 11.1 V (7500mAh)
Type-C Charging Input5V/2A, 9V/1.2-1.5A
USB Output5V/2A, 9V/1.2-1.5A
Power SourceBattery Powered
Operation ModeAutomatic/Manual
Cylinder Size19 Cylinders
Display ScreenLED Dual Display
Tire Pressure GaugeOne Click
Other FunctionsLighting, Mobile Power Bank
Wired or WirelessWireless Car Tire Inflatable

Setup

Charging the Air Pump

ASMAX T10 charging a smartphone

Image: The ASMAX T10 air pump being used to charge a smartphone, illustrating its power bank function.

The air pump has a Type-C charging input (5V - 2A). To charge, connect the air pump to a power adapter using the provided Type-C charging cable. The power indicator bar will flash while charging and turn solid green when fully charged. Note: The air pump cannot be used during charging.

Connecting the Air Pipe to the Valve

Three steps to connect the air pump and inflate a tire

Image: Step-by-step guide for connecting the nozzle, selecting mode, and starting inflation.

The ASMAX Smart Air Pump T10 comes with various adapters for different valve types:

  • Schrader Valve: Commonly found on mountain bikes, electric bikes, motorcycles, and automobiles. Connect the fast-connected air pipe directly to the Schrader valve interface.
  • Presta Valve: Required for road bikes and some mountain bikes.
    1. Connect the Presta valve adapter to the Schrader valve interface on the high-pressure air pipe.
    2. Unscrew the Presta valve cap from the tire.
    3. Connect the Presta valve to the adapter for inflation.
  • Inflation Needle: Used for inflating sports balls (basketballs, footballs, etc.). Press the inflation needle and the Schrader valve interface tightly, then insert the needle into the ball's inflation hole.

Operating Instructions

Power On/Off

  • Power On: Long press the Power button for three seconds.
  • Power Off: Long press the Power button for three seconds.

Mode Selection and Preset Pressure

Five inflation modes: Car, Motorcycle, Bicycle, Ball, Custom

Image: Visual representation of the five distinct inflation modes available on the device.

Short press the Mode Selection/Unit button to cycle through the five inflation modes:

  • Automobile Mode: Default 36 PSI (Adjustable 2-64 PSI)
  • Motorcycle Mode: Default 40 PSI (Adjustable 2-54 PSI)
  • Bicycle Mode: Default 38 PSI (Adjustable 2-150 PSI)
  • Custom Mode: Default 100 PSI (Adjustable 2-160 PSI)
  • Ball Mode: Default 8 PSI (Adjustable 2-15 PSI)

To adjust the preset pressure:

  • Short press the '+' or '-' buttons: Adjusts by +/- 0.5 PSI (below 100 PSI) or +/- 1 PSI (above 100 PSI).
  • Long press the '+' or '-' buttons: Quickly adjusts the preset pressure value.

The device automatically saves the selected mode and preset pressure for future use.

Starting and Stopping Inflation

Automatic shut-off feature of the air pump

Image: Illustration of the automatic shut-off function when the preset pressure is reached.

  • In the power-on state, short press the Start/Stop button to begin inflation.
  • The pump will automatically stop once the preset air pressure value is reached.

Real-Time Pressure Monitoring and Unit Switching

Dual LED display showing real-time pressure and other information

Image: Close-up of the dual LED display, showing real-time pressure, preset pressure, battery level, and selected mode.

When the air pump is powered on and the air pipe is connected to an object, the upper part of the display screen will show the measured air pressure value. Long press the Mode Selection/Unit button to switch between PSI, BAR, KPA, and Kg/cm² units. (1 BAR = 14.5 PSI)

LED Lighting Modes

ASMAX T10 with LED light illuminating a tire

Image: The ASMAX T10 air pump's LED light illuminating a tire in the dark, demonstrating its emergency lighting feature.

  • Short press the LED lighting button to turn on the steady LED light.
  • Short press again for flashing light and SOS mode.
  • Short press a third time to turn off the light.

Pressure Resetting

If the air pump is powered on, the air pipe is not connected to an inflation object, and the measured pressure value is not 0.0, simultaneously press the '+' and '-' buttons for two seconds. The display will return to normal after fully lighting up. This can improve air pressure accuracy, especially if there are differences in altitude or sensor readings. Calibration is not recommended at high temperatures.

Maintenance

  • Regularly check the air pipe and connectors for any signs of wear or damage. Ensure all connections are screwed tightly before use.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the air pump in a cool, dry place, away from direct sunlight and extreme temperatures.
  • If the device will not be used for an extended period, charge it periodically to maintain battery health.

Troubleshooting

FaultSolution
Slow inflation.
  1. Check if the power level is sufficient.
  2. Check the air pipe for air leakage.
  3. Ensure connecting parts at both ends of the air pipe are screwed tightly.
  4. Check the inflation object for air leakage.
Unable to power on or inflate.
  1. Check if the power level is sufficient.
  2. Check if the current tire pressure is higher than the preset value.
Unable to increase/decrease the preset pressure value.Check if the inflation mode is correct. Select Custom mode to adjust the preset value within the 2-160 PSI range.
Inflation is normal but the pressure value displays zero.
  1. The air pump is not designed for low-pressure products like balloons.
  2. For empty tires, the tire pressure value will be displayed only after a period of inflation.
Air pump automatically powers off after the valve is screwed.This product automatically powers off if it remains idle for three minutes. Long press the Start button to power it on again.
Air leakage occurs when the air pipe is connected.Screw the air pipe tightly.
The color of the power indicator light in inflation state is inconsistent with standby state.This is normal due to voltage drop during power lithium battery discharge.
The power indicator light is not on after charging.Use a safe and compliant charging cable and adapter for re-charging.

User Tips

  • Pre-set Pressure: Always pre-set your desired pressure before starting inflation to utilize the automatic shut-off feature and prevent over-inflation.
  • Check Tire Pressure Regularly: For vehicles, regularly checking and maintaining correct tire pressure can enhance driving safety, extend tire lifespan, reduce fuel consumption, and improve the overall driving experience.
  • Use as Power Bank: Don't forget the 7500mAh battery can also serve as a power bank for your smartphone, bike computer, or headlight in emergencies.
  • Night Use: The built-in LED light is very useful for inflating in low-light conditions or as an emergency warning light.
  • Storage: Keep all nozzles and the air hose together in the provided storage bag to avoid losing small parts.

Warranty and Support

This ASMAX Smart Air Pump T10 comes with a 2-year warranty. For any product inquiries, technical support, or warranty claims, please visit our official website or contact our customer service team.

Official Website: www.asmaxworld.com

Scan the QR code on the last page of the printed manual for more information.

You can also find us on social media: ASMAX WORLD on Instagram, Twitter, LinkedIn, and YouTube.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.