Introduction
The MLOVE E80 portable Bluetooth speaker is designed to deliver powerful, immersive audio with dynamic features for various environments. This manual provides essential information on setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Video: MLOVE E80 Bluetooth Speaker Product Overview. This video demonstrates the speaker's features, portability, and sound capabilities.
Package Contents
Please check the package for the following items:
- MLOVE E80 Portable Bluetooth Speaker
- USB Type-C Charging Cable
- User Manual
Image: Contents of the MLOVE E80 speaker package. Includes the speaker, charging cable, and manual.
Product Overview
Familiarize yourself with the speaker's components and controls.
Control Panel
Image: Top view of the MLOVE E80 speaker's control buttons. From left to right: Power, EQ (Bass Boost), Play/Pause, Volume Down, Volume Up.
Ports
Image: Close-up of the MLOVE E80 speaker's input ports, protected by a rubber flap. Includes USB-C charging port, 3.5mm AUX-IN jack, and Micro SD card slot.
Setup
Charging the Speaker
- Open the protective rubber flap on the side of the speaker to reveal the charging port.
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the USB Type-C cable to a 5V/2A (or higher) USB power adapter (not included).
- The charging indicator light will illuminate. The speaker will be fully charged in approximately 2 hours.
- Once fully charged, disconnect the charging cable and securely close the protective rubber flap to maintain waterproof integrity.
Operating Instructions
Power On/Off
- Power On: Press and hold the Power button () for 2-3 seconds until you hear an audible prompt and the RGB lights illuminate.
- Power Off: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the RGB lights turn off.
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (the RGB lights may flash).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "MLOVE E80" from the list of devices.
- Once paired, you will hear a confirmation sound, and the RGB lights will change to a steady pattern.
- The speaker will automatically reconnect to the last paired device when powered on, if the device is within range and Bluetooth is enabled.
Image: MLOVE E80 speaker wirelessly connected to a smartphone and tablet, demonstrating Bluetooth 5.4 connectivity.
True Wireless Stereo (TWS) Pairing
To achieve a wider, immersive stereo sound, you can pair two MLOVE E80 speakers together.
- Ensure both MLOVE E80 speakers are powered on and not connected to any Bluetooth device.
- On one of the speakers (this will be the primary speaker), double-press the Power button. You will hear a prompt indicating TWS pairing mode.
- The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound.
- Now, connect your device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.
- Both speakers will now play audio in stereo.
Image: Two MLOVE E80 speakers wirelessly paired for True Wireless Stereo (TWS) sound, enhancing a desktop gaming setup.
RGB Light Modes
The MLOVE E80 features dynamic RGB lighting. To cycle through the light modes or turn them off:
- Change Light Mode: Short press the Power button to cycle through different RGB light patterns.
- Turn Off Lights: Continue short-pressing the Power button until the lights turn off.
Image: Three MLOVE E80 speakers demonstrating different RGB light colors and patterns.
Bass Boost Function
Enhance your audio's low frequencies with the dedicated Bass Boost feature.
- Activate/Deactivate Bass Boost: Short press the EQ button () to toggle the Bass Boost on or off.
- When Bass Boost is active, the bass will be noticeably amplified.
Image: A robotic hand interacting with the MLOVE E80 speaker's control panel, highlighting the Bass Boost feature.
Aux-in Mode
Connect external audio devices using the 3.5mm AUX-IN cable (not included).
- Open the protective rubber flap on the side of the speaker.
- Connect one end of a 3.5mm audio cable to the speaker's AUX-IN port.
- Connect the other end of the audio cable to your external audio device.
- The speaker will automatically switch to AUX-IN mode.
- Control playback and volume from your connected device.
Micro SD Card Playback
Play music directly from a Micro SD (TF) card.
- Ensure your Micro SD card contains supported audio formats (MP3, WMA, WAV, FLAC, APE).
- Open the protective rubber flap on the side of the speaker.
- Insert the Micro SD card into the designated slot until it clicks into place.
- The speaker will automatically switch to Micro SD card playback mode and begin playing music.
- Use the speaker's volume and play/pause buttons to control playback.
Maintenance
- Cleaning: Wipe the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Waterproof Care: Always ensure the protective rubber flap covering the ports is securely closed when using the speaker near water or in dusty environments to maintain its IPX7 waterproof and IP6X dustproof rating.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery: To prolong battery life, fully charge the speaker before long periods of inactivity and recharge it at least once every three months.
Image: The MLOVE E80 speaker surrounded by splashing water, illustrating its IPX7 waterproof capability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker for at least 30 minutes. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from speaker. | Ensure speaker is in pairing mode. Turn device Bluetooth off/on. Move device closer to speaker (within 10m). |
| No sound. | Volume too low; incorrect input mode; device not playing. | Increase volume on speaker and device. Check if correct mode (Bluetooth, AUX, SD) is active. Ensure music is playing on the source device. |
| TWS pairing fails. | Speakers already paired to another device; too far apart. | Ensure both speakers are disconnected from other devices. Place speakers close to each other during TWS pairing. |
| Micro SD card not recognized. | Card inserted incorrectly; unsupported format; corrupted card. | Reinsert card correctly. Ensure audio files are supported (MP3, WMA, WAV, FLAC, APE). Try a different Micro SD card. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | MLOVE |
| Model | E80 |
| Speaker Type | Portable |
| Communication | Bluetooth 5.4 |
| Input Power (W) | 25-49 W (30W Output) |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 (supports TWS for 2) |
| Sound Mode | Standard Mode (with Bass Boost) |
| Battery | Yes (3600mAh, up to 10 hours playtime) |
| Power Source | Battery |
| Cabinet Material | Plastic |
| Waterproof | Yes (IPX7) |
| Dustproof | Yes (IP6X) |
| Input/Output | TF (Micro SD), AUX-IN, USB Type-C (charging) |
| Voice Control | No |
| Support APP | No |
| Product Dimensions | Ø75 mm × 191 mm |
| Net Weight | Approx. 525 g |
User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface.
- When using TWS mode, place the two speakers within 10 meters of each other for the best stereo experience.
- To maximize battery life, avoid exposing the speaker to extreme temperatures.
Warranty and Support
MLOVE products are manufactured to the highest quality standards. For any issues or questions regarding your MLOVE E80 speaker, please refer to the seller's support channels or contact customer service. Keep your purchase receipt for warranty claims.
