1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless Carplay Android Auto Module. This module integrates advanced smartphone connectivity into your vehicle's existing MIB1/MIB2 infotainment system, enabling features like wireless CarPlay, Android Auto, screen mirroring, and more, without replacing your original screen.
Please read this manual thoroughly before installation and use to ensure proper functionality and to avoid any damage to your vehicle or the module.
2. Compatibility
This module is designed for Volkswagen and Skoda vehicles equipped with MIB1 or MIB2 infotainment systems. It is crucial to verify your car's compatibility before installation.
2.1 Compatible Vehicle Models (MIB Systems)
The system is compatible with vehicles that have a CD player in the glove box and a display screen of 5.8/6.5/7/8/8.3 inches.
For Volkswagen:
- Golf 7 (2013-2019)
- Golf Sportsvan (2014-2019)
- GTI (2014-2019)
- Passat B8 (2014-2019)
- Tiguan (2014-2021)
- B8 Variant (2014-2019)
- Teramont (2014-2019)
- New Polo (2016-2019)
- T-Cross (2016-2019)
- Jetta (2016-2019)
- T-ROC (2016-2019)
- MOIA (2016-2019)
- CrossBlue (2016-2019)
For Skoda:
- SUPERB-B (2014-2019)
- Octavia (2014-2019)
- KODIAQ (2014-2019)
- KOROC (2014-2019)
- KAMIQ (2014-2019)
For Seat:
- Arona (2016-2019)
- New Leon (2016-2019)
- NEW IBIZA (2016-2019)
- Toledo Ateca (2016-2019)
Important: Please check your car model and confirm the presence of a CD player in the glove box, as shown in the images below, before proceeding with the installation.


3. Kit Contents
The package includes the following components:

- CarPlay Decoder Box: The main module for integrating smartphone features.
- Power Cable Harness: For connecting the module to the vehicle's power supply.
- LVDS Cable: For video signal transmission between the module and the car's display.
- WiFi Antenna: For wireless connectivity (CarPlay, Android Auto, screen mirroring).
- USB-AV Cable: For USB media playback and potentially other connections.
4. Setup and Installation
Installation requires careful handling of vehicle components. If you are not comfortable performing the installation yourself, it is recommended to seek professional assistance.
4.1 Physical Installation Steps
Follow these steps to physically install the CarPlay decoder module:
- Remove Armrest Box: Press at the marked point to remove the armrest box.
- Remove Factory Car Radio: Use a disassembly tool to carefully remove the factory car radio.
- Remove Wire Cables: Disconnect the wire cables from the factory car head unit.
- Connect Power Harness and LVDS Cables: Connect the provided Power Harness and LVDS cables to the decoder box. Ensure the other side connects correctly to the car's wiring.
- Check DIP Switch Code: After connecting all cables, check the DIP switch code for your car (refer to section 4.3).
- Secure Decoder Box: Install the CarPlay interface decoder box in an appropriate space near or on the OEM head unit.



4.2 Cable Connection Diagram
Refer to the following diagram for detailed cable connections. Ensure all connections are secure.

Note: The WiFi antenna should be kept away from metal surfaces for optimal signal. If there is any noise, try unplugging the MIC OUT wire.

4.3 DIP Switch Configuration
The toggle (DIP) switches on the decoder box must be set according to your car's screen size to ensure correct display. The DIP switches are located on the side of the CarPlay decoder box.

Refer to the table and diagrams below to set the switches for your specific screen size:



| Screen Size | Switch 1 | Switch 2 | Switch 3 | Switch 4 | Switch 5 | Switch 6 | Switch 7 | Switch 8 |
|---|---|---|---|---|---|---|---|---|
| 5.8/6.5 inch (400x240) | OFF | OFF | OFF | OFF | ON | ON | ON | ON |
| 7/8 inch (800x480) | OFF | OFF | OFF | ON | ON | ON | ON | ON |
| 8.3 inch (1024x480) | OFF | OFF | OFF | OFF | ON | ON | ON | ON |
5. Operating Instructions
5.1 Switching Between Original MIB and CarPlay Interface
After all cables are connected, you can switch between the original MIB system and the CarPlay interface by long-pressing the "BACK" button on your car's control panel.

5.2 Wireless CarPlay Connection
To connect your iPhone wirelessly to CarPlay:
- Step 1: On the CarPlay interface, select "Bluetooth" in the SmartPhone Setting menu.
- Step 2: Check the Bluetooth Device name, which should start with "CAR-xxxx".
- Step 3: Turn on Wi-Fi on your iPhone and keep it on. Then, go back to Bluetooth settings on your iPhone to connect to the "CAR-xxxx" device.
- Step 4: Select the Bluetooth Device name "CAR-xxxx" on your iPhone. A pairing request window will pop up. Pair the devices and select "Use CarPlay".

5.3 Apple Wireless Screen Mirroring (AirPlay)
To mirror your iPhone screen wirelessly using AirPlay:
- Step 1: On the CarPlay interface, select "AirPlay" in the SmartPhone Setting menu.
- Step 2: On your iPhone, select the "Wireless LAN" option. The search bar will show "CAR-WIFI-XXX". Click the link; the password is 66668888.
- Step 3: After successful Wi-Fi connection, return to your iPhone's main interface. Open the shortcut menu page, select "Screen Mirroring", and turn it on.
- Step 4: Once "Screen Mirroring" is active on your iPhone, select "AirPlay" to complete the wireless screen mirroring.

5.4 Wireless Android Auto Connection
To connect your Android phone wirelessly to Android Auto:
- Step 1: On the CarPlay interface, select "Bluetooth" in the SmartPhone Setting menu.
- Step 2: Check the Bluetooth name starting with "CAR-xxx" in the Bluetooth interface.
- Step 3: On your Android phone, click on the Bluetooth name beginning with "CAR-xxx". A pairing request will pop up; click "Pairing".
- Step 4: After successful Bluetooth pairing, follow the Android Auto connection process on your phone's screen. The system will connect automatically.

5.5 Android Wireless Screen Mirroring (AutoLink)
To mirror your Android phone screen wirelessly using AutoLink:
- Step 1: On your Android phone, scan the QR code provided in the AutoLink setup screen (or use your mobile browser) to download and install the AutoLink app.
- Step 2: On the CarPlay interface, switch the "WIFI Auto Link" to "ON" in the Settings page.
- Step 3: Open the AutoLink software on your phone. Search for "CAR-WIFI-XXXX" and connect. Then, click "START NOW" on the phone prompt box.
- Step 4: The media sound for AutoLink requires a Bluetooth connection. Ensure your phone is connected via Bluetooth for audio.

5.6 Audio Settings and Echo Cancellation
To adjust audio settings or resolve echo issues during phone calls:
- Navigate to "Settings" > "Audio" on the CarPlay interface.
- To adjust individual audio levels (Media, Phone, Ringtone, Voice, Other), use the sliders provided.
- For echo cancellation, select "Call Echo Cancellation" from the Audio settings.
- Click the "Start Auto AEC" button. This will generate a beep.
- During the 20-second estimation period, ensure the car is quiet and the volume is set to a moderate position.
- Wait for the 20-second estimation to complete.

6. Key Features
The CARABC Wireless Carplay Android Auto Module offers a range of features to enhance your driving experience:
- Wireless & Wired CarPlay/Android Auto: Seamless integration of your smartphone's interface onto your car's display.
- Screen Mirroring: Supports iPhone AirPlay and Android AutoLink for mirroring your phone's screen.
- Navigation: Access GPS navigation applications like Google Maps, Waze, and Apple Maps with real-time traffic information.
- Voice Control: Utilize Siri voice interaction for phone calls, information, navigation, and music by saying "Hey Siri...".
- USB Media Playback: Play video and audio media directly from a USB flash drive.
- Original Camera & Parking Sensor Support: Supports the vehicle's original reverse camera and parking sensors. Aftermarket reverse cameras (CVBS/AHD720P format) are also supported.
- Factory Control Integration: Control the system using existing steering wheel controls and touch controls.
- Bluetooth 5.0 & Dual-band Wi-Fi: Built-in 2.4G and 5.8G Wi-Fi for stable wireless connectivity and Bluetooth 5.0 for reliable pairing.
- Non-destructive Installation: Designed for installation without cutting or modifying original vehicle wiring.






7. Troubleshooting
7.1 Common Issues and Solutions
- Audio Echo during Phone Calls: If you experience an echo, perform the "Call Echo Cancellation" procedure described in section 5.6. Ensure the car is quiet and volume is moderate during the 20-second estimation.
- Noisy Audio: If you hear noise, try unplugging the MIC OUT wire as indicated in the cable connection diagram (Figure 4.4).
- Screen Glitching: Some users reported that installing this module resolved previous screen glitching issues with MIB1 units. Ensure all connections are secure and DIP switches are correctly set.
- AirPlay/Screen Mirroring Blurry: Ensure a stable Wi-Fi connection. For wired mirroring, use a high-quality data cable.
- Difficulty with Installation: The installation can be complex, especially for first-timers. Refer to the detailed installation steps and diagrams. If issues persist, professional installation is recommended.
- Module Not Fitting: For some car models (e.g., Polo 6C), the head unit placement can be challenging. The module can often be pushed behind the infotainment system and routed to the passenger footwell for storage, preventing the infotainment system from protruding.
7.2 Contacting Support
If you encounter issues that cannot be resolved using this manual, please contact customer support. To expedite assistance, please provide the following information:
- Your order ID.
- Your car model.
- The year of your car.
- The screen size of your car's display.
- The current toggle switch (DIP switch) setup.
- Pictures of the LVDS cable connection.
- The software version (found in the CarPlay decoder menu: "Setting" > "System Version").
The full user manual in PDF format is available for download here.
8. Maintenance
The CARABC Wireless Carplay Android Auto Module is designed for minimal maintenance. To ensure optimal performance:
- Keep Connections Secure: Periodically check that all cables and connections remain secure, especially after any vehicle servicing.
- Software Updates: The module supports free updates. Check the manufacturer's website or contact support for information on available software updates to ensure the best performance and compatibility.
- Cleanliness: Keep the module and its components free from dust and debris.
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | CARABC |
| Origin | Mainland China |
| Connectivity | Wireless & Wired CarPlay, Android Auto, AirPlay, AutoLink |
| Wireless Technology | Built-in 2.4G and 5.8G Wi-Fi, Bluetooth 5.0 |
| Control Methods | Steering wheel controls, Touch controls, Voice control (Siri) |
| Camera Support | Original reverse camera, parking sensors, aftermarket reverse camera (CVBS/AHD720P) |
| Media Playback | USB Flash Play |
| Package Length | 25 cm |
| Package Width | 17 cm |
| Package Height | 10 cm |
| Package Weight | 0.987 kg |
10. User Tips
- Installation Patience: Installation can be fiddly, especially with cable management. Take your time and refer to the diagrams. Some users found it helpful to have experience with car part disassembly.
- Cable Routing: For vehicles like the VW Polo with challenging infotainment system placement, the decoder box can often be pushed behind the infotainment system and routed to the passenger footwell for storage, preventing the infotainment system from protruding.
- DIP Switch Check: Double-check the DIP switch settings for your specific screen size. For some Polo models, ensuring switch 4 is down (OFF) while others are ON might be necessary for correct screen fit.
- Audio Quality: The module generally retains original audio quality. If you experience issues, check connections and perform echo cancellation.
- Initial Startup: The system might start a bit slow initially, but performance tends to improve after a few uses, feeling more OEM-like.
- Bluetooth for Audio: Remember that for Android Auto and AutoLink screen mirroring, the media sound often relies on a separate Bluetooth connection to the car's system.
11. Warranty and Support
The product comes with a one-year guarantee and exclusive support service. Free updates are also provided.
For any support inquiries, please refer to the "Contacting Support" section (7.2) for required information to provide.
