Introduction
Thank you for choosing the DATA FROG S80 Pro Wireless Game Controller. This manual provides detailed instructions on how to set up, operate, and troubleshoot your new controller. Designed for versatility, the S80 Pro offers a rich gaming experience across multiple platforms including Nintendo Switch, iOS, Android, and PC.
Product Overview
Familiarize yourself with the layout and functions of your S80 Pro controller:

Figure 1: Front view of the S80 Pro Controller with button labels.
- LED Indicator: Displays connection status and charging.
- Left Stick / L3 Button: Analog stick and push-button function.
- Right Stick / R3 Button: Analog stick and push-button function.
- L Button: Left shoulder button.
- ZL Button: Left trigger button.
- R Button: Right shoulder button.
- ZR Button: Right trigger button.
- Y, X, A, B Buttons: Standard action buttons.
- -, + Buttons: Select/Start equivalent buttons.
- D-pad Button: Directional pad.
- Capture Button: Takes screenshots (on supported platforms).
- Home Button: Returns to home screen/menu.
- Light Button: Controls RGB lighting effects.
- Turbo Button: Activates/deactivates turbo function.
- Vibration Button: Adjusts vibration intensity.
- M1, M2 Buttons: Programmable back buttons.
- SYNC Button: Used for pairing.
- Reset Button: Resets the controller.
Setup and Connection
The S80 Pro controller supports multiple connection methods depending on your device. Please ensure Airplane Mode is disabled on your device before attempting to connect, and avoid touching the joysticks during the connection process.
I. Connecting to Nintendo Switch (NS)
- Navigate to the 'Controllers' menu on your Nintendo Switch.
- Select 'Change Grip/Order'.
- Press and hold the SYNC Button on the back of the S80 Pro controller for approximately 2 seconds until the signal LED indicator flashes from left to right. Release the button.
- The controller will automatically pair with your Switch. Upon successful connection, the LED indicators will become solid.
Quick Reconnection: After the initial pairing, simply press the HOME Button to wake up and reconnect the controller to your Switch console.
Troubleshooting Connection:
- Ensure Airplane Mode is disabled on your Switch.
- Delete existing controller pairing information on your Switch: Go to System Settings > Controllers and Sensors > Disconnect Controllers.
- Repeat the initial connection steps.
Video: Demonstrates connecting the S80 Pro controller to a Nintendo Switch console.
II. Connecting to Android Devices
- Enable Bluetooth on your Android device and search for available devices.
- Press and hold the A Button and the HOME Button on the controller simultaneously until LED1 and LED2 start flashing. Release the buttons.
- On your Android device, find "Gamepad" in the Bluetooth device list and tap to pair.
- Upon successful pairing, LED1 and LED2 will remain solid.
Supported: HID mode games on Android.
Limitations: Vibration, screenshot, and motion control functions are not available on Android.
III. Connecting to iOS Devices
- Enable Bluetooth on your iOS device and search for available devices.
- Press and hold the B Button and the HOME Button on the controller simultaneously until LED2 and LED3 start flashing. Release the buttons.
- On your iOS device, find "Xbox Wireless Controller" in the Bluetooth device list and tap to pair.
- Upon successful pairing, LED2 and LED3 will remain solid.
Supported: MFI games on iOS.
System Requirement: iOS 13.0 or later.
Limitations: Vibration, screenshot, and motion control functions are not available on iOS.
IV. Connecting to PC Windows
Wired Connection:
- Connect the S80 Pro controller to your PC using the included USB cable.
- LED1 and LED4 will light up upon successful connection.
Wireless Connection with Receiver (if applicable to your version):
- Plug the wireless receiver into an available USB port on your PC.
- Press and hold the X Button and the HOME Button on the controller simultaneously until LED2 and LED3 start flashing. Release the buttons.
- Wait for a successful connection; LED2 and LED3 will remain solid.
Troubleshooting Wireless PC Connection: If the connection fails, unplug the receiver from the PC and repeat step 1.
Supported: X-INPUT mode games on Windows and platforms like Steam.
System Requirement: Windows 7 or higher.
Limitations: Screenshot and motion control functions are not available on PC.
V. Connecting to R36S (via OTG)
For R36S consoles (specifically for PSP emulators):
- Connect the R36S console and the S80 Pro controller via an OTG cable.
- On the R36S, press the right stick to access the menu.
- Navigate to Setting > Controls > Controls mapping.
- Set the button mappings in sequence according to your preference.
Video: Demonstrates connecting the S80 Pro controller to an R36S console via OTG.
Operating Instructions
Special Tips (Android, iOS, PC Windows)
- Function Cycling (Left Joystick/D-pad): Long press Capture and L3 for 1 second. The controller will vibrate once to cycle between the functions of the left joystick and the D-pad.
- Function Cycling (A/B and X/Y Buttons): Long press Capture and R3 for 1 second. The controller will vibrate once to cycle between the functions of the A/B and X/Y buttons.
Turbo Function
The Turbo function allows for rapid, repeated input of a button press. Applicable buttons: A, B, X, Y, L, ZL, R, ZR.

Figure 2: Turbo function settings and speed adjustment.
- Manual Turbo: Press and hold the Turbo Button, then press a functional button (e.g., A) to activate manual turbo for that button.
- Automatic Turbo: Press and hold the Turbo Button, then press a functional button that already has manual turbo configured (e.g., A) to switch to automatic turbo.
- Deactivate Turbo: Press and hold the Turbo Button, then press a functional button that has automatic turbo configured (e.g., A) to deactivate its turbo function.
- Deactivate All Turbos: Press - and D-pad DOWN simultaneously. The controller will vibrate once to confirm.
Turbo Speed Levels:
- Slow: 5 pulses/second (signal light blinks slowly).
- Medium: 12 pulses/second (signal light blinks at medium speed).
- Fast: 20 pulses/second (signal light blinks rapidly).
Adjusting Turbo Speed:
- Increase Speed: Press Turbo and D-pad UP (↑) simultaneously.
- Decrease Speed: Press Turbo and D-pad DOWN (↓) simultaneously.
Vibration Function
The S80 Pro controller features dual vibration motors with adjustable intensity.

Figure 3: Four adjustable vibration modes.
Four Intensity Levels: None, Weak, Medium, Strong.
Adjusting Vibration:
- Ensure the controller is connected to your console/device.
- Press the Vibration Button on the back of the controller to cycle through the intensity levels.
Programming Settings (M1/M2 Buttons)
The M1 and M2 back buttons can be programmed to perform single or multiple button functions.

Figure 4: Location of programmable M1 and M2 buttons.
Programmable Buttons: A, B, X, Y, L, ZL, R, ZR, L3, R3, D-pad.
Single Button Programming:
- With the controller powered on, press and hold - and either M1 or M2 simultaneously for 2 seconds. The controller will vibrate, and the joystick ring light will turn white and flash.
- Press the functional button you wish to assign (e.g., A).
- Press M1 or M2 again to save the setting. The controller will vibrate, and the joystick ring light will return to its normal state.
Multiple Button Programming (Macro):
- With the controller powered on, press and hold + and either M1 or M2 simultaneously for 2 seconds. The controller will vibrate, and the joystick ring light will turn white and flash.
- Press the sequence of buttons you wish to record (the controller records the timing between button presses).
- Press M1 or M2 again to save the macro. The controller will vibrate, and the joystick ring light will return to its normal state.
Clearing Programming:
- Single Button Macro: Press and hold + and either M1 or M2 for 2 seconds until the joystick ring light flashes, then press the same M1 or M2 button again to clear.
- All Macros: Press T and - simultaneously. The controller will vibrate to confirm.
Light Effects Control
The S80 Pro features customizable RGB lighting effects on its joysticks and panel.

Figure 5: RGB lighting effects on the controller.
- Cycle Fixed Colors: Press the Light Button.
- Switch Lighting Modes: Press Light Button + + Button to toggle between breathing mode (slowly cycles 8 colors) and constant light mode.
- Toggle Joystick Ring Light: Press Light Button + L3 Button.
- Toggle Panel Light: Press Light Button + R3 Button (not applicable to the matte black version).
- Adjust Brightness: Press Light Button + move the Left Joystick UP/DOWN.
Charging
The S80 Pro controller is equipped with a 900mAh battery for extended gameplay.

Figure 6: Battery specifications and charging details.
- While Connected: The LED indicator will flash slowly during charging and remain solid when fully charged.
- While Powered Off: The LED indicator will flash slowly during charging and turn off when fully charged.
- A full charge takes approximately 3 hours and provides up to 15 hours of play time.
Manual Gyroscope Calibration
If you experience joystick drift or inaccurate motion sensing during gameplay, you can perform a manual gyroscope calibration:
- Ensure the controller is powered off.
- Place the controller on a flat, horizontal surface.
- Press and hold the HOME Button and the - Button simultaneously until LED1-LED4 flash alternately three times.
- Press the + Button to complete the calibration. The signal LED indicator will turn off.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | DATA FROG |
| Model | S80 Pro |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Models | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Other Compatibility | iOS (13.0+), Android, PC Windows (7+ via wired/wireless receiver) |
| Connectivity | Bluetooth, Wired USB, Wireless Receiver (for PC) |
| Battery Included | Yes |
| Battery Capacity | 900mAh |
| Play Time | Up to 15 hours |
| Charge Time | Approx. 3 hours |
| Trigger Button Type | Non-Linear |
| Vibration Modes | 4 levels (None, Weak, Medium, Strong) |
| Gyro Sensor | 6-Axis Motion Wake Up Function |
| Turbo Function | Auto & Manual, 3 speeds (5/12/20 shots/s) |
| Programmable Buttons | M1/M2 (assign 1-16 basic buttons) |
| RGB LEDs | 9-Color, 3 modes (Strobe, Breathing, Static) |
| Product Dimensions (L x W x H) | 24cm x 17cm x 6cm |
| Product Weight | 0.608 kg |
Troubleshooting
- Controller Fails to Connect:
- Ensure Airplane Mode is off on your device.
- For Nintendo Switch, delete previous pairing information in System Settings > Controllers and Sensors > Disconnect Controllers, then re-pair.
- For PC wireless connection, try unplugging and replugging the receiver.
- Ensure you are using the correct button combination for pairing with your specific device (Switch: SYNC; Android: A+HOME; iOS: B+HOME; PC Wireless: X+HOME).
- Joystick Drift / Inaccurate Motion Sensing:
- Perform a Manual Gyroscope Calibration as described in the Operating Instructions section.
- Ensure the controller is placed on a flat, horizontal surface during calibration.
- If drift persists, especially if it's a new controller, it might indicate a manufacturing defect.
- Vibration, Screenshot, or Motion Control Not Working on Android/iOS/PC:
- These functions are generally not supported when connected to Android, iOS, or PC (except for vibration on PC in some games). This is a limitation of the operating systems/connection modes, not a defect of the controller.
- Analog Stick Sensitivity/Precision:
- The analog sticks are designed for precision. If you experience issues, ensure the controller is calibrated.
- Some games may have in-game sensitivity settings that can be adjusted.
User Tips
- Many users find the customizable RGB lighting and vibration functions enhance immersion. Experiment with different settings to find what suits your gaming style.
- The programmable M1/M2 back buttons are excellent for optimizing gameplay, especially in games requiring complex button combinations. Take time to set them up for your favorite titles.
- The controller is noted for its comfortable, ergonomic grip, making it suitable for long gaming sessions.
- The S80 Pro offers great value and quality, often compared favorably to original controllers.
- It works well with various games, including popular titles like Mario Kart.
- The controller is compatible with Steam Deck, offering expanded gaming options.
Warranty and Support
For any assistance, questions, or technical support regarding your DATA FROG S80 Pro Wireless Game Controller, please contact our customer support team:
Email: support@datafrogx.com
We are committed to providing you with the best possible gaming experience.