Ezonetronics RM-LH2523F

Contents

Ezonetronics Wireless CarPlay Android Auto Retrofit Kit

Model: RM-LH2523F

Brand: Ezonetronics

1. Introduction

Preface

Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.

Safety Precautions

  • Install only by qualified professionals to avoid damaging vehicle electrical systems.
  • Disconnect car battery before installation to prevent short circuits.
  • Ensure all connections are secure and insulated to avoid fire hazards.
  • Do not block airbags, driver visibility, or vehicle controls during installation.
  • Avoid modifying essential vehicle safety systems or wiring.
  • Operate connected devices only when parked; never distract from driving.
  • Regularly check for loose connections or overheating during use.
  • Stop using immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with local traffic laws and regulations.
  • Keep product away from water, extreme temperatures, and direct sunlight when not in use.

2. Function Introduction

Apple CarPlay

CarPlay lets iPhone users connect to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. It enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly.

Apple CarPlay interface displayed on a car's infotainment screen

Image: Apple CarPlay interface displayed on a car's infotainment screen.

Android Auto

Android Auto connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. It prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety.

Android Auto interface displayed on a car's infotainment screen

Image: Android Auto interface displayed on a car's infotainment screen.

Key Features

  • Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 Technology.
  • Wired/Wireless CarPlay and Android Auto for seamless smartphone integration.
  • Control via steering wheel controls, central control panel, touch controls (dependent on vehicle specification), and voice control (e.g., "Hey Siri...").
  • GPS navigation Apps like Google Maps, Waze, and Apple Maps are available with live traffic information.
  • Built-in DSP for fully adjustable Audio EQ and best audio quality.
  • With 2 RCA inputs, allowing the addition of rear and right PAL/NTSC cameras.
  • Plug and play, non-destructive installation, free from wire breaks.
  • Switch in/out of CarPlay display at any time using factory controls.
Wireless CarPlay Smart Module features including Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, Online Entertainment

Image: Overview of Wireless CarPlay Smart Module features.

Front/Rear/360 Input

The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.

Optional Aftermarket Rear View Camera display on car screen

Image: Optional Aftermarket Rear View Camera display on car screen.

3. Compatible Models

This kit is compatible with specific Land Rover and Jaguar models equipped with an 8-inch Harman head unit. Please refer to the table below to confirm compatibility with your vehicle.

Land Rover/Jaguar Compatibility
BrandCar ModelYearsScreen Size
Land RoverRange Rover Evoque2016-20188 inch
Discovery 52016-2018
Discovery Sport2016-2018
JaguarXE/XEL2016-2018
XF/XFL/XJL2016-2018
F-TYPE2019
F-PACE2017-2019
Table of compatible Land Rover and Jaguar models with years and screen sizes

Image: Compatible Model List for Land Rover and Jaguar vehicles.

Compatibility Check

To determine if your vehicle can install this CarPlay interface, if you are unsure, please contact customer support by taking photos of your car’s center console. Also, check the time display style on your car's screen:

Compatibility check based on time display position on car screen

Image: Visual guide for checking screen compatibility based on time display position.

4. Package Contents

The package includes the main module and all necessary accessories for installation:

  • Main Module (RM-LH2523F)
  • Power Cable
  • LVDS OUT Cable
  • LVDS IN Cable
  • RCA & USB Cable
Package contents including the main module and various cables

Image: Diagram showing the main module dimensions (139mm x 92mm x 20mm) and included cables (Power cable, LVDS OUT, LVDS IN, RCA & USB cable).

5. Installation Manual

Refer to the wiring diagram below for proper installation of the retrofit kit. Ensure all connections are secure before powering on the vehicle.

Wiring Diagram

Wiring diagram for the CarPlay Android Auto Retrofit Kit

Image: Detailed wiring diagram showing connections between the retrofit module, factory power harness, LVDS harness, head unit, and original car fiber optic cable.

6. DIP Settings & Switch

The DIP switch settings must be configured according to your specific car model and screen size. Incorrect settings may lead to improper functionality.

DIP Settings for Land Rover/Jaguar Models
Car ModelYearScreen SizeDIP
Discovery Sport/Evoque2017-20188 inch3, 5 ON
Freellander2016-20188 inch2, 3, 4 ON
Discovery 52017-20188 inch2, 5 ON
XE/XF/XJL2016-20188 inch5 ON
E/F-PACE20178 inch2, 5 ON
F-TYPE20198 inch2, 5, 7 ON

Note: Please note that the dial is down to "ON" for the Range Rover different screen config (we cannot check the screen config in the system). After you change the different DIP settings, please reboot to effect.

7. Button Control

General Button Control

ButtonOperationFunction
Phone answer button iconShort pressAnswer the phone
Phone hang up button iconShort pressHang up the phone
»Short pressNext song
«Short pressPrevious song
+Short pressIncrease the volume
–Short pressDecrease the volume

Image: Steering wheel buttons for general control functions.

Land Rover Evoque Button Control

ButtonOperationFunction
Home button iconLong pressSwitch OEM screen to interface screen OR interface screen to the OEM screen
Warning triangle button iconDouble ClickSwitch OEM screen to interface screen OR interface screen to the OEM screen
Touch screen iconTouch screenControl function

Image: Central control panel buttons for Land Rover Evoque.

Button Control (Other Cars)

ButtonOperationFunction
Home button icon on car displayLong pressSwitch OEM screen to interface screen OR interface screen to the OEM screen
Car settings button icon on car displayLong pressSwitch OEM screen to interface screen OR interface screen to the OEM screen
Warning triangle button icon on car displayDouble ClickSwitch OEM screen to interface screen OR interface screen to the OEM screen
Touch screen iconTouch screenControl function

Image: Buttons on the central control panel for other compatible cars.

8. Wireless Connection

General Information

The latest technology currently in use is a wireless CarPlay and Android Auto solution that supports audio and video separation. Before using the wireless connection, please pair your device via Bluetooth and ensure that the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.

Wireless CarPlay connection diagram and interface

Image: Diagram illustrating wireless connection from smartphone to upgrade kit and car display, with CarPlay interface shown.

Wireless CarPlay Connection Steps

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
  2. Select the Bluetooth Device name as "CAR Audio_XXXX" and choose "Pair".
  3. When a request window pops up, select "Use CarPlay".

Wireless Android Auto Connection Steps

After successful Bluetooth pairing, follow the on-screen Android Auto connection process.

Wireless Android Auto interface and connection prompt

Image: Wireless Android Auto interface and a prompt to connect Android Bluetooth or insert USB cable.

Audio Source Check

Please check on your iPhone whether the sound source is set to the original car radio for proper audio output.

Bluetooth audio output settings on iPhone and car display

Image: Bluetooth audio output settings on iPhone and car display, showing pairing and sound output options.

9. External Settings

Rear View Camera Input

This CarPlay interface supports camera input for clear rearview imagery. After connecting the camera as per the guide, ensure the correct settings are applied.

To enable the reversing rear view function:

  1. Enter the system settings: Click "Factory mode" > "Advanced mode".
  2. Enter the password "888888".
  3. Go to "MCU setup" and uncheck the "A0" option.
  4. Return to the previous level and click "Restart system" to successfully enable the reversing rear view function.

Radar and Trajectory Settings

If the aftermarket camera you are installing also supports the reversing trajectory line, please uncheck the A1 box to display the reversing trajectory line. The A2 box is for the aftermarket radar option; uncheck the box to use it.

10. Specifications

ParameterValueParameterValue
Operating voltage9-16V, 14.4V (rated)Storage temperature-30~+85°C
Operating temperature-30~+75°CAmbient humidity≤98% (at 45°C), 65±5% (rated)
Power consumption current1A (rated), 3A (Max)Shutdown currentCurrent: 300mA (Clock is on)
Quiescent currentless than 3mA
Charging current≤2A, when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid products burning.

11. Troubleshooting

Why will the Box's Bluetooth disconnect?

The following is the working principle of wireless CarPlay: After the device information is confirmed through Bluetooth pairing, a Wi-Fi connection is established to transmit data. To avoid interference, the Bluetooth connection will be disconnected. This is a normal phenomenon.

I cannot connect the CarPlay, but the Bluetooth already paired

Please forget the device Bluetooth and reset Wi-Fi in the iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).

Why the wireless CarPlay not Stable?

  1. Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
  2. Switch the WiFi channel and then enter the CarPlay box. Click: Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6 or 11, depending on the current region.

If you have any technical issues, please contact techsupport@anyfar.com.

12. User Tips

  • The kit is designed to retain your vehicle's original display and control functions, ensuring a seamless integration.
  • All necessary wiring harnesses are included in the package for a complete installation.
  • Always double-check the DIP switch settings against your specific car model and screen size to ensure correct functionality.
  • For optimal wireless performance, ensure the CarPlay box is mounted in a location free from metal obstructions that could interfere with Wi-Fi signals.
  • If you experience connection issues, try resetting your phone's network settings and adjusting the Wi-Fi channel on the CarPlay box.
  • Utilize the voice control features (Siri/Google Assistant) for safer, hands-free operation while driving.

13. Warranty and Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact our support team at techsupport@anyfar.com.

A detailed user manual in PDF format is also available for download: User Manual (PDF)

For more information, visit www.anyfar.com

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.