Toocki TB07 Series WiFi USB Adapter User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Toocki TB07 series WiFi USB Adapter. This device is designed to provide high-speed wireless connectivity and Bluetooth functionality to your PC or laptop, supporting the latest Wi-Fi 6 standard and Bluetooth 5.4.

Please read this manual thoroughly before using the product to ensure proper setup and optimal performance. Note that specific features and antenna configurations may vary by model (TB07A, TB07B, AX1300, AX900, AX600, AX150).

2. Key Features

• Wi-Fi 6 Smart Algorithm: Provides stronger signal stability and wider coverage compared to Wi-Fi 5, with faster 5GHz connections.
• OFDMA and UL MU-MIMO Technology: Enables multiple devices to connect simultaneously for more efficient data transfer and reduced latency.
• Dual-Band Connectivity (2.4GHz/5GHz): Offers faster speeds, wider range, and more stable connections.
• Bluetooth 5.4 Support: Allows stable and simultaneous connection with multiple Bluetooth devices on Windows 10 and Windows 11 systems.
• Versatile Functionality: Supports Wi-Fi reception, transmission, and AP sharing.
• High-Gain Antennas: External rotatable antennas (up to 90° and 180°) offer wider coverage and stronger wall penetration.
• Driver-Free Installation: Built-in wireless driver for instant plug-and-play setup on compatible operating systems.
• Multiple Encryption Modes: Supports WPA-PSK, WPA2-PSK, WPA/WPA2-PSK, and 64/128-bit WEP encryption to protect your online data and privacy.

3. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.

• Toocki TB07 Series WiFi USB Adapter (specific model as purchased)
• User Manual (this document)

Note: The Toocki TB07 series includes various models. Some models feature dual or multiple rotatable antennas (e.g., TB07B, AX900, AX1300), while others may have a single antenna design (e.g., TB07A, AX150). Ensure you have received the model you intended.

4. Specifications

The following table outlines the general specifications for the Toocki TB07 series. Please note that specific parameters may vary slightly between models (TB07A, TB07B, AX1300, AX900, AX600, AX150).

4.1. Model Specific Parameters

Model: TB07A

Material	ABS
Interface	USB-A
Product Size	70 x 37 x 10 mm
Product Weight	~16g

Model: TB07B

Material	ABS
Interface	USB-A
Product Size	80 x 72 x 26 mm
Product Weight	~22g

5. Setup Instructions

The Toocki TB07 series adapters are designed for easy, driver-free installation on compatible Windows operating systems.

1. Insert the Adapter: Plug the Toocki WiFi USB Adapter into an available USB-A port on your desktop PC or laptop. For optimal performance, use a USB 3.0 port if available.
2. Automatic Driver Installation: For Windows 10 and Windows 11, the operating system should automatically detect the device and install the necessary drivers. This process typically takes a few moments.
3. Verify Installation: Once installed, you should see a new Wi-Fi network icon and a Bluetooth icon in your system tray.
4. Adjust Antennas (if applicable): If your model has rotatable antennas, adjust them for optimal signal reception. The antennas can rotate 90° and 180° for best positioning.

6. Operating Instructions

6.1. Connecting to Wi-Fi

1. After successful installation, click on the Wi-Fi icon in your system tray (usually bottom-right corner of the screen).
2. A list of available Wi-Fi networks will appear. Select your desired network.
3. Enter the network security key (password) if prompted.
4. Click "Connect". Your device should now be connected to the Wi-Fi network.

6.2. Using Bluetooth 5.4

The adapter supports Bluetooth 5.4 for connecting various peripherals.

1. Ensure Bluetooth is enabled on your computer. You can usually find this in Windows Settings > Devices > Bluetooth & other devices.
2. Put your Bluetooth device (e.g., headphones, keyboard, mouse, controller) into pairing mode.
3. On your computer, click "Add Bluetooth or other device" and select "Bluetooth".
4. Select your device from the list and follow any on-screen prompts to complete pairing.

6.3. AP Sharing (Access Point Mode)

The adapter can function as a wireless access point, allowing other devices to connect to your computer's internet connection.

1. Ensure your computer is connected to the internet via an Ethernet cable or another Wi-Fi adapter.
2. Go to Windows Settings > Network & Internet > Mobile hotspot.
3. Toggle "Mobile hotspot" to On.
4. You can configure the network name (SSID) and password for your hotspot.
5. Other devices can now connect to your computer's internet via the Toocki adapter.

7. Maintenance

• Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the adapter to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the adapter yourself. This will void the warranty.
• Ensure the antennas (if present) are not bent or damaged.

8. Troubleshooting

9. User Tips

• For optimal Wi-Fi 6 performance, ensure your router also supports Wi-Fi 6 (802.11ax).
• When using the adapter as an AP (Access Point), place your computer in a central location to maximize coverage for connected devices.
• If experiencing signal issues, try rotating the antennas to different angles to find the best reception.
• Keep your Windows operating system updated to ensure compatibility and access to the latest drivers and features.

10. Warranty and Support

Toocki products are designed for reliability and performance. For warranty information and technical support, please refer to the official Toocki website or contact your point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.