HENG LONG TK16 TK-16 TH00947

Contents

TK16 TK-16 Mainboard Sound Board User Manual

For HengLong 1/16 Remote Control Tank Modify Upgrade Stabilization

Introduction

This manual provides essential information for the installation, operation, and maintenance of the TK16 TK-16 Mainboard Sound Board. This product is designed to upgrade HengLong 1/16 scale remote control tanks, offering enhanced sound effects and the capability for stabilization. Due to the complex nature of this upgrade, it is recommended for experienced players.

A detailed user manual in PDF format is available for reference: View User Manual (PDF)

Safety Information

DANGER

  • Keep this product away from flammable materials and open flames. The battery and electronic components are a potential fire hazard if damaged or misused.

CAUTION

  • Avoid looking directly into the infrared/laser aiming beam, as it may cause eye irritation or damage.
  • Read these instructions carefully before use and retain them for future reference.
  • Do not expose the tank to high temperatures, direct sunlight, or humid environments; this product is intended to be used in dry areas only.
  • The hull and motor may become hot during prolonged use. Do not touch hot surfaces to avoid burns.
  • Do not operate the tank near water, swimming pools, or other liquid environments.

Specifications

FeatureDetail
ModelTK16 TK-16 TH00947
Dimensions (Mainboard)88.5 x 65.5 x 28.5 mm
Power Supply2S ~ 3S
MaterialComposite Material
Vehicle TypeTANK (HengLong 1/16 Remote Control Tanks)
FeaturesChinese and English voice prompts, various tank sound effects (King Tiger, Tiger I, M1, Bulldog), Stabilization function (requires separate SWB board)
Remote Control RequirementMore than 8 channels
Recommended Age14+ years
OriginMainland China
Package Weight0.5 kg
Package Dimensions13 x 9 x 8 cm

Setup and Installation

The TK16 mainboard is an upgrade component for HengLong 1/16 RC tanks. Installation involves replacing the existing mainboard and connecting various components. This is a complex modification recommended for experienced users. No detailed step-by-step manual is provided, only simple instruction diagrams may be available.

Components Overview

Complete TK16 kit including mainboard, speaker, and various wires/components.
Figure 1: Complete TK16 kit contents, including the mainboard, speaker, and various connection wires and small components.
TK16 Mainboard with pre-connected wires.
Figure 2: The TK16 Mainboard, showing its compact design and various pre-connected wires for different functions.
Close-up of the TK16 Mainboard showing various connectors.
Figure 3: Detailed view of the TK16 Mainboard's connectors, essential for proper wiring during installation.
Speaker component for the TK16 sound board.
Figure 4: The speaker component, which connects to the mainboard to provide realistic tank sound effects.
Assortment of connection wires for the TK16 mainboard.
Figure 5: Various connection wires included with the kit, used to interface the mainboard with other tank components.

General Installation Guidelines (Expert Level)

  1. Preparation: Ensure your HengLong 1/16 RC tank is powered off and the main battery is disconnected.
  2. Disassembly: Carefully open the tank's chassis to access the existing mainboard. Document all existing connections with photos before disconnecting.
  3. Mainboard Replacement: Remove the old mainboard. Install the TK16 mainboard in its place, ensuring it is securely mounted.
  4. Wiring: Connect all necessary wires from the TK16 mainboard to the tank's motors, turret, gun, lights, and other functions. Refer to any provided diagrams or the original tank's wiring for guidance.
  5. Speaker Installation: Connect the included speaker to the TK16 mainboard and mount it within the tank's chassis for optimal sound output.
  6. Remote Control Configuration: The TK16 mainboard requires a remote control with more than 8 channels for full functionality. Configure your remote control according to its specific manual to interface with the new mainboard.
  7. Stabilization Function (Optional): If you wish to enable the stabilization function, you will need to acquire a separate SWB board and integrate it with the TK16 mainboard. This requires additional wiring and configuration.
  8. Power Connection: Connect the tank's main battery (2S or 3S LiPo recommended) to the TK16 mainboard.
  9. Initial Test: Before reassembling the tank, perform a preliminary power-on test to ensure basic functions (movement, turret, sound) are operational.
  10. Reassembly: Once satisfied with the connections and initial test, carefully reassemble the tank's chassis.

Operating Your RC Tank with TK16 Mainboard

After successful installation of the TK16 mainboard, follow these steps to operate your remote control tank:

Initial Power-Up

  1. Charge Batteries: Fully charge the tank's main battery and the remote control's batteries according to their respective charging instructions.
  2. Install Batteries: Install the charged main battery into the tank's battery compartment and secure the cover. Insert batteries into the remote control and ensure its power switch is in the "OFF" position.
  3. Power On Sequence: First, turn on your remote control. Then, switch on the power for the RC tank.

Features and Controls

  • Sound Effects: The TK16 mainboard provides realistic sound effects for various tanks, including King Tiger, Tiger I, M1, and Bulldog. These sounds will activate during operation (e.g., engine start, movement, firing).
  • Voice Prompts: The system includes Chinese and English voice prompts to indicate operational status or actions.
  • Remote Control Channels: Utilize your 8+ channel remote control to access and control the various functions enabled by the TK16 mainboard, such as movement, turret rotation, gun elevation, firing, and potentially stabilization (if SWB board is installed).

Shutdown & Storage

  • Shutdown Sequence: After use, power off the remote control first, then power off the tank.
  • Storage: Store the tank and remote control in a cool, dry place, away from children and pets.

Maintenance

  • Cleaning: Use a dry, soft cloth to wipe the tank's exterior. Do not use water, solvents, or abrasive cleaners, as these can damage electronic components.
  • Track and Wheel Inspection: Inspect the tracks and wheels regularly for debris. Remove any dirt or obstructions to ensure smooth movement and prevent strain on the motors.
  • General Storage: When not in use, store the tank and remote control in a cool, dry place to prevent damage from moisture or extreme temperatures.

Troubleshooting

This section provides general troubleshooting tips. For specific issues related to the TK16 mainboard, consult online communities or the seller for expert advice.

  • No Power: Ensure all battery connections are secure and batteries are fully charged. Check the power switch on both the tank and the remote control.
  • No Sound: Verify the speaker is correctly connected to the mainboard. Check volume settings if available on your remote control or mainboard.
  • Erratic Movement/Control: Ensure your remote control is properly bound to the tank and configured for the TK16 mainboard. Check for any loose wiring connections.
  • Stabilization Not Working: Confirm that the optional SWB board is correctly installed and configured, and that your remote control is set up to activate the stabilization function.
  • Overheating: If the hull or motor becomes excessively hot, immediately power off the tank and allow it to cool down. Prolonged overheating can damage components. Check for obstructions in moving parts that might cause excessive load.

User Tips

  • Expert Installation Recommended: The installation of the TK16 mainboard is complex. It is highly recommended that only experienced RC hobbyists or professionals undertake this modification to avoid damage to the board or the tank.
  • Verify Remote Control Compatibility: Ensure your remote control has at least 8 channels to fully utilize the features of the TK16 mainboard.
  • Consider the SWB Board: If stabilization is a desired feature, plan to purchase and integrate the separate SWB board during the initial installation to save time and effort.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.