1. Product Overview
This Automatic Watch Winder is designed to keep your mechanical watches wound and ready to wear. It features a luxurious leather finish, quiet operation, and multiple winding modes to suit various automatic watch movements.


2. Setup Instructions
2.1 Power Supply
The watch winder can be powered by either D batteries or a USB-TYPEC cable.
Battery Installation:
- Locate the battery compartment on the bottom or back of the winder.
- Open the battery compartment cover.
- Insert the required D batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

USB-TYPEC Power:
- Connect one end of the USB-TYPEC cable to the power interface on the back of the winder.
- Connect the other end to a suitable USB power adapter (not included) or a USB port.

2.2 Placing Watches
- Open the lid of the watch winder. The winder features an automatic stop mode when the lid is open for convenient watch placement.
- Gently place your automatic watches onto the high-quality sponge pillows in each slot.
- Ensure the watches are securely seated on the pillows.
- Close the lid.
3. Operating Instructions
3.1 Control Panel
The watch winder features two control knobs on the front panel for selecting winding modes and three switches on the back panel for power, auto-stop, and LED light control.


3.2 Winding Modes
Each watch slot can be independently controlled using its dedicated knob. There are five available modes:
- Mode 1 (Switch): Turns the winder ON/OFF.
- Mode 2: Rotates clockwise for 2 minutes, then stops for 6 minutes, and cycles.
- Mode 3: Rotates counter-clockwise for 2 minutes, then stops for 6 minutes, and cycles.
- Mode 4: Rotates clockwise for 2 minutes, stops for 6 minutes, then rotates counter-clockwise for 2 minutes, stops for 6 minutes, and cycles.
- Mode 5: Rotates clockwise for 5 minutes, then counter-clockwise for 5 minutes, continues for 3 hours, then stops for 9 hours, and cycles.
3.3 LED Light Control
The winder features controllable LED ambient lights. Use the dedicated light switch on the back panel to turn the lights ON or OFF.
3.4 Automatic Stop Feature
For convenience and safety, the winder automatically stops rotation when the lid is opened, allowing you to safely place or remove watches.
4. Maintenance
4.1 Cleaning
- Wipe the exterior of the winder with a soft, dry cloth.
- For stubborn marks on the leather, use a slightly damp cloth and dry immediately.
- Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Clean the glass window with a soft, lint-free cloth and a glass cleaner if necessary.
4.2 Storage
- Store the watch winder in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the winder is placed on a stable, level surface to prevent tipping.
5. Troubleshooting
- Winder is not rotating:
- Check if the power cable is securely connected or if the batteries are correctly installed and have sufficient charge.
- Ensure the main power switch on the back panel is in the 'ON' position.
- Verify that a winding mode (Mode 2-5) is selected using the front knobs, not just Mode 1 (Switch).
- LED lights are not working:
- Check the dedicated light switch on the back panel to ensure it is in the 'ON' position.
- Confirm the winder is receiving power.
- Unusual noise during operation:
- Ensure the winder is placed on a flat, stable surface.
- Check that watches are properly seated and not obstructing the rotation.
- The winder features porous cavity noise reduction technology, but minor operational sounds are normal. If the noise is excessive, contact support.
- Watch is not fully wound:
- Different automatic watches require different TPD (Turns Per Day) and rotation directions. Experiment with different winding modes (clockwise, counter-clockwise, bi-directional) to find the optimal setting for your specific watch.
- Ensure the watch is securely placed on the pillow.
6. Specifications
| Feature | Description |
|---|---|
| Product Name | Watch Shaker |
| Material | Plastic, Leather |
| Model Number | Watch Winders |
| Item Type | Watch Winders |
| Watch Capacity | 2 Slots |
| Dimensions (L x W x H) | 25.5 cm x 17.7 cm x 19.5 cm |
| Item Weight | 2.6 kg |
| Power Supply | D Battery / USB-TYPEC |
| Noise Reduction | Porous cavity noise reduction technology |
| Lighting | Controllable LED ambient light |
| Lid Feature | Automatic stop when opening the lid |

7. User Tips
- Optimal Winding: If your watch is not keeping accurate time after being in the winder, try adjusting the winding mode. Some watches prefer clockwise, others counter-clockwise, and many benefit from bi-directional winding. Consult your watch's manual for its specific winding requirements.
- Battery Life: To maximize battery life, consider using the USB-TYPEC power option when the winder is placed near an outlet. Batteries are ideal for portability or areas without easy power access.
- Watch Fit: Ensure your watch fits snugly but not too tightly on the sponge pillow. A proper fit prevents the watch from slipping or being damaged during rotation.
8. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase records for reference.