1. Introduction
Thank you for choosing the Retekess FT11 FM Transmitter and PR13 Portable FM Receiver. This system is designed for wireless audio transmission, ideal for applications such as guided tours, simultaneous interpretation in meetings, church services, and factory visits. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a satisfying user experience. Please read it carefully before use and keep it for future reference.
2. Safety Information
RF Energy Exposure and Product Safety Guide
Before using this radio, please read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
Local Government Regulations
When radios are used as a consequence of employment, local government regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the core requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private mobile and fixed services.
RF Warning Statements
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
- To avoid interference, turn off the radio in areas where signs are posted to do so.
- DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
3. Package Contents
Depending on the package option purchased, your product may include:
Product overview with various package options for the FT11 transmitter and PR13 receiver, along with accessories.
- Retekess FT11 FM Transmitter
- Retekess PR13 Portable FM Receiver
- Clip-on Microphone (for FT11)
- Earphones (for PR13)
- USB Charging Cable (for FT11)
- User Manual (this document)
4. Setup
4.1. FT11 FM Transmitter Setup
The FT11 transmitter has a built-in 1500mAh Li-ion battery. Before first use, ensure it is fully charged using the provided USB charging cable.
The FT11 transmitter features a built-in 1500mAh battery, providing 6-8 hours of working time, and charges via a Micro USB adapter.
Detailed view of the FT11 transmitter's ports: Micro USB charging jack, AUX input, built-in MIC, and external microphone slot.
- Charging: Connect the Micro USB charging cable to the FT11 and a USB power source. The charging indicator will show the charging status.
- Microphone Connection: Plug the clip-on microphone into the external microphone slot on the FT11.
- AUX Input: To stream music from a smartphone, computer, MP3, or CD player, connect an AUX cable (not included) to the AUX input port.
4.2. PR13 Portable FM Receiver Setup
The PR13 receiver requires 2 AAA batteries (not included).
The FT11 uses a built-in Li-ion battery, while the PR13 requires 2 AAA batteries (not included).
- Battery Installation:
- Remove the battery cover on the back of the PR13 receiver.
- Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated in the battery compartment.
- Replace the battery cover.
- Earphone Connection: Insert the earphones into the headphone jack of the PR13 receiver. The earphones also function as the FM antenna.
5. Operating Instructions
5.1. PR13 Receiver Operation
- Power On/Off: Press the Power button to switch on the receiver. The display will show the last tuned frequency. Press again to turn off.
- Volume Control: Press the VOL+ button to increase the volume (highest level is 31). Press the VOL- button to decrease the volume (lowest level is 0). The screen will show the selected volume level.
- Manual Station Search: Press the TUN+ button for upward channel searching and TUN- for downward channel searching. Keep pressing the button until you locate your required channel station.
- Automatic Station Search: Press and hold TUN+ for 2 seconds for automatic upward channel searching. Press and hold TUN- for 2 seconds for automatic downward channel searching. It will stop searching once it reaches a station.
- Memorize Stations: Press the MEM button, then press digital Key 1-5 to save your favorite stations.
- Recall Preset Stations: Press Key 1-5 to directly tune to the station you have saved.
- Stereo Option: Press ST/MON for stereo channel.
- Lock Function: Press the LOCK button to lock all keys, preventing accidental changes. Press again to unlock.
The PR13 receiver offers multiple functions including mono/stereo sound, world clock, switch lock, and 5 preset stations.
The PR13 receiver supports both mono sound for louder audio and stereo sound for an immersive listening experience.
5.2. FT11 Transmitter Operation
- Power On/Off: Press the Power button to turn on the transmitter.
- Frequency Adjustment: Short press the 'F' button continuously until 'Frequency' appears on the screen. Then, short press the Next or Last button (play/pause buttons) to adjust the frequency. Each press will increase or decrease the frequency by 100KHz. The FT11 operates in the 76-108MHz range.
- Power Output Levels: The FT11 supports 3 levels of power output. Adjust as needed for optimal transmission distance and battery life.
The FT11 transmitter operates within 76-108MHz, while the PR13 receiver covers 60-108MHz.
5.3. Pairing FT11 Transmitter with PR13 Receiver
To ensure the receiver picks up the transmitter's signal, both devices must be tuned to the same FM frequency.
This video demonstrates the pairing process between the Retekess FT11 FM Transmitter and PR13 Portable Receiver.
- Turn on both the FT11 Transmitter and the PR13 Receiver.
- On the FT11 Transmitter, short press the 'F' button continuously until 'Frequency' appears on the screen. Use the Next or Last buttons to set your desired transmission frequency (e.g., 88.2 MHz).
- On the PR13 Receiver, short press the TUN- or TUN+ buttons to adjust the frequency until it matches the frequency set on the FT11 Transmitter.
- Once both devices are on the same frequency, the PR13 receiver will pick up the audio transmitted by the FT11.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the devices. Do not use abrasive cleaners or solvents.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care (PR13): If the PR13 receiver will not be used for an extended period, remove the AAA batteries to prevent leakage.
- Battery Care (FT11): For the FT11 transmitter, charge the built-in battery regularly, even if not in use, to maintain battery health.
7. Troubleshooting
- No sound or poor reception on PR13 receiver:
-
- Ensure the FT11 transmitter and PR13 receiver are tuned to the exact same frequency.
- Check the volume level on the PR13 receiver.
- Ensure earphones are properly plugged into the PR13, as they act as the antenna. Expand the headphone line for better reception.
- Replace the AAA batteries in the PR13 receiver if the screen is blinking or dim.
- Charge the FT11 transmitter if its battery is low.
- Move away from steel structures or high-rise buildings that may shield the radio signal. Try using the radio near windows for better results.
- Interference or static:
-
- Ensure there are no other strong FM signals on the same frequency. Try changing the frequency on the FT11 transmitter and matching it on the PR13 receiver.
- Avoid operating the devices near other electronic equipment that may cause electromagnetic interference.
- If the equipment causes harmful interference to radio or television reception, try reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, or connecting the equipment to a different circuit.
- PR13 receiver is unstable (screen blinking or dim):
-
- This indicates the AAA battery power is running out. Please replace the batteries.
8. Specifications
8.1. FT11 FM Transmitter
| Feature | Specification |
|---|---|
| Transmitter Frequency | 76-108MHz |
| Pre-emphasis | 50us/75us |
| Output Impedance | 50 Ω |
| SNR | ≥70dB |
| Frequency Response | 30Hz~15000Hz |
| RF Output Power | 1mW-300mW, 3 levels |
| Supported MP3 Formats | FLAC, WAV, WMA, MP3 |
| Supported Memory Card | Max 32GB |
| Power Supply | Built-in 1500mAh Li-poly battery |
| Working Hours | About 6-8 hours |
| Charge Method | DC 5V 1A Micro USB jack |
| Size | 99 x 58 x 15mm / 3.9 x 2.2 x 0.6 in |
| Weight | 80g / 0.17lb |
| FCC ID | 2A3NOFT11 |
Dimensions and weight of the FT11 transmitter and PR13 receiver.
8.2. PR13 Portable FM Receiver
| Feature | Specification |
|---|---|
| FM Frequency | 60-108MHz |
| Sensitivity | <3.5uV |
| Power Supply | 2 x AAA batteries (not included) |
| Earphone Jack | 3.5mm |
| Tuning Increase | 0.1MHz |
| Built-in Speaker | No |
| Size | 94 x 54 x 23mm |
| Weight | 40g / 0.09lb |
The PR13 receiver features 5 preset stations and controls for easy tuning.
9. User Tips
- Optimal Range: Users report good sound quality and very good range, making it suitable for guided tours. However, actual transmission distance can be affected by environmental factors and battery status.
- Versatile Use: The system is effective for various applications, including guided tours, meetings, and church services.
- Custom Configurations: If you require a specific combination of transmitters, receivers, and headphones (e.g., one transmitter, 10 receivers, and 10 headphones), please contact the seller for guidance on purchasing the appropriate set.
10. Warranty & Support
Warranty Card Information
Most new products carry a one-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification. This guarantee card should be kept by the user and is not subject to replacement if lost.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Misuse or abuse of the product, or as a result of unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
Regulatory Compliance
CE Requirements: Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.
FCC Requirements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Requirements (Licence-exempt radio apparatus): This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Disposal: The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com
For further assistance, please refer to the official user manual PDF: View User Manual (PDF)