1. Introduction
The Mestek DP10020 is a high-power digital DC power supply designed for precision applications. It offers adjustable voltage and current output, programmable settings, and a clear 4-bit digital display for accurate readings. This device is equipped with advanced features and multiple protection mechanisms to ensure safe and reliable operation in various professional and educational environments.

Figure 1: Front view of the Mestek DP10020 Digital DC Power Supply.
2. Key Features
- Adjustable Output: Precise control over voltage and current using an encoder switch for fine and coarse adjustments.
- One-Button Output Control: Simple activation/deactivation of output with a single button, indicated by green (ON) and red (OFF) lights.
- Four-Digit Display: High-accuracy 4-bit digital display for voltage, current, power, and resistance.
- Multiple Protections: Includes Overvoltage (OV), Overcurrent (OC), Overpower (OP), Overtemperature (OT), and Short Circuit protection for enhanced safety.
- Communication Interface: Supports RS232/485/USB interfaces for PC-linked software control and SENSE compensation.
- Low Ripple and Noise: Ensures a stable and clean power output.
- Well-Designed Internal Structure: Features a low-noise temperature cooling fan for efficient heat dissipation.

Figure 2: Encoder switch for precise voltage/current adjustment.

Figure 3: One-button output control with ON/OFF indicators.

Figure 4: Visual representation of the five protection features.

Figure 5: Communication interface for PC control.
3. Product Overview
3.1 Front Panel Description

Figure 6: Front Panel Layout and Controls.
- Digital Displays: Separate 4-digit displays for Current (A), Voltage (V), Power (W), and Resistance (R).
- Protection Indicators: LEDs for Over Voltage (OV), Over Current (OC), Over Power (OP), and Over Temperature (OT).
- Voltage Regulation: Knobs for fine and coarse adjustment of output voltage.
- Constant Pressure Indication (C.V.): LED indicating constant voltage mode.
- Current Regulation: Knobs for fine and coarse adjustment of output current.
- Constant Current Indication (C.C.): LED indicating constant current mode.
- Output Switch: One-button control to enable or disable the power output.
3.2 Rear Panel Description

Figure 7: Rear Panel Layout and Connections.
- AC Input Port: For connecting the main power cable.
- Output Terminals: Positive (+) and Negative (-) terminals for connecting the load.
- Optional Output Compensation Interface: For advanced applications requiring remote sensing.
- RS232/485/USB Optional: Communication ports for PC connectivity.
- Temperature Cooling Fan: Ensures optimal operating temperature.
4. Specifications

Figure 8: Detailed Product Specifications.
| Parameter | Value |
|---|---|
| Brand Name | Mestek |
| Model Number | DP10020 |
| Output Power | >500W, 2000W |
| Output Type | Single Phase |
| Input Voltage | 180-264VAC |
| Output Voltage Range | 0-100V |
| Output Current Range | 0-20A |
| Output Frequency | 50/60HZ |
| Voltage Resolution | < 100V: 10mV, ≥ 100V: 100mV |
| Current Resolution | < 100A: 100mA, ≥ 100A: 100mA |
| Voltage Stability | ≤2% |
| Current Stability | ≤0.5% |
| Load Stability | ≤0.5% |
| Ripple and Noise | ≤ 1% |
| Device Size (D*W*H) | 410*250*155mm |
| Net Weight | ~7.5kg |
| Operating Environment Altitude | ≤ 2000 meters |
| Operating Environment Ambient Temperature | 5 °C ~ 40 °C |
| Operating Environment Relative Humidity | < 80% |
| Storage Environment Temperature | 5 °C ~ 30 °C |
| Storage Environment Relative Humidity | < 60% |
| Power Input | AC220V ± 10%, 50Hz (or AC110V input or AC100V/200V manual switch) |
5. Installation Instructions
- Placement: Place the power supply on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for airflow, especially around the cooling fan on the rear panel.
- Power Connection: Connect the provided AC power cord to the AC input port on the rear panel of the power supply and then to a suitable mains outlet. Ensure the input voltage matches the device's requirements (AC220V ± 10%, 50Hz or AC110V input or AC100V/200V manual switch).
- Initial Check: Before connecting any load, ensure all control knobs are set to their minimum positions.
6. Wiring
Connect your load to the output terminals on the rear panel. Always ensure the power supply is OFF before making any connections.
- Output Positive (+): Connect the positive lead of your load to the red output terminal.
- Output Negative (-): Connect the negative lead of your load to the black output terminal.
- Grounding: For safety, ensure the power supply is properly grounded via the AC power cord.
- Remote Sensing (Optional): If using the optional output compensation interface, refer to the detailed PDF manual for specific wiring instructions to minimize voltage drop across load leads.
- Communication Interface (Optional): For PC control, connect the appropriate RS232/485/USB cable to the rear panel port. Follow the CD-ROM instructions to install the computer software and SCPI programming instruction set.
7. Operating Instructions
- Power On: Press the main power switch (usually located on the front panel). The digital displays will light up.
- Set Voltage: Use the 'Voltage Regulation' coarse knob to set the approximate desired voltage. Then, use the 'Voltage Regulation' fine knob for precise adjustment. Observe the voltage display.
- Set Current Limit: Use the 'Current Regulation' coarse knob to set the approximate desired current limit. Then, use the 'Current Regulation' fine knob for precise adjustment. This sets the maximum current the supply will deliver. Observe the current display.
- Enable Output: Press the 'Output Switch' button (often indicated by a green/red light). The green light indicates output is ON. The power supply will now deliver power to the connected load according to the set voltage and current limits.
- Monitor Output: Continuously monitor the voltage, current, and power displays during operation.
- Protection Indicators: If any protection LED (OV, OC, OP, OT) illuminates, it indicates that a protection condition has been met. Immediately disable the output and investigate the cause.
- Power Off: Before disconnecting the load, press the 'Output Switch' button to disable the output (red light). Then, turn off the main power switch.
8. Safety Notes
- This product is NOT explosion-proof. Do not use in flammable or explosive environments.
- Always disconnect power before wiring or making changes to connections. Incorrect wiring may damage the module.
- Keep the device away from strong electromagnetic interference sources.
- Do not disassemble or modify the product yourself; this will void the warranty and may lead to electric shock or damage.
- Ensure proper ventilation to prevent overheating. Do not block the cooling fan or vents.
- Operate the device within its specified voltage, current, and power limits.
9. Maintenance
- Cleaning: Regularly clean the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
- Ventilation: Keep the cooling fan and ventilation openings free from dust and obstructions to ensure proper heat dissipation.
- Storage: When not in use for extended periods, store the power supply in a cool, dry place within the specified storage temperature and humidity ranges.
10. Troubleshooting
- No Output: Check if the main power switch is ON and if the 'Output Switch' button is pressed (green light). Verify the AC power cord is securely connected.
- Protection Indicator ON: If an OV, OC, OP, or OT indicator lights up, immediately turn off the output. Check your load for short circuits, excessive current draw, or incorrect voltage settings. Allow the unit to cool down if OT is active.
- Inaccurate Readings: Ensure all connections are secure. If using remote sensing, verify its proper setup. For persistent issues, consult the detailed manual or contact support.
- Communication Issues: If PC software fails to connect, ensure the correct drivers are installed (from CD-ROM) and the correct communication port is selected in the software.
11. User Tips
- Always set your voltage and current limits before enabling the output to protect your connected circuit.
- Utilize the fine adjustment knobs for precise control, especially when working with sensitive components.
- For long-term stability and accuracy, allow the power supply to warm up for a few minutes after powering on before taking critical measurements.
12. Package Contents
The following items are typically included in the product package:

Figure 9: Product List and Dimensions.
- 1 x Mestek DP10020 Power Supply
- 1 x User's Manual (Printed)
- 1 x Product Certification
- 1 x Power Cord
- 1 x CD-ROM (for PC software and SCPI programming instructions, if applicable)
13. Warranty and Support
For detailed warranty information and technical support, please refer to the official Mestek documentation or contact customer service.
A comprehensive user manual in PDF format is available for download. Please refer to the official product page or contact customer support for access to the latest version of the manual and any accompanying software.
Customer Service Contact:
WhatsApp: +86 15232153826
Email: kaigui8882@163.com