1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Inefala 7 Inch Car Monitor LCD Display and Rearview Waterproof 4pin IR Night Rear View Camera system. Designed for a wide range of vehicles including buses, trucks, RVs, caravans, and trailers, this system enhances driving safety by providing clear rear-view visibility, especially in challenging conditions.
The system can function as a full-time rear view monitor when connected directly to a 12V-24V power source, or as a car back-up monitor when connected to the vehicle's reverse light circuit, automatically activating when reversing.
2. Package Contents
Please check the package carefully to ensure all items are present and undamaged:
- 1 x 7-inch Car Monitor
- 1 x Backup Camera (without guidelines)
- 1 x Aviation Connector Video Cable (10 meters)
- 1 x Remote Controller
- 1 x Mount Bracket
- 1 x Two-sided Adhesive Tape
- 1 x User Manual
- Accessories (e.g., screws, car charger, power cable)
3. Specifications
3.1. 7-inch TFT LCD Car Monitor
| Screen Size | 7 inch |
| Resolution | 800*480 |
| Housing Material | ABS Plastic |
| TV System | NTSC/PAL |
| Video Input | 2 video inputs (V1/V2) |
| Rear-view Function | V2 auto reverse when trigger activated |
| Screen Adjustment | Up/down/left/right |
| Power Supply | DC 12V - 24V |
| Power Consumption | 5W |
| Operation Mode | Key operation and remote control |
| Reversing Line Adjustment | Support up/down movement and width adjustment |
| Supported Cameras | Up to 2 cameras |
| Operating Temperature | -10℃ to +40℃ |
| Storage Temperature | -25℃ to +80℃ |
| Languages | English, Russian, Chinese, Japanese, Korean |
3.2. 18 IR LEDs Backup Camera
| Design | Metal body with bracket for easy installation |
| Image Sensor | Color CMOS |
| Viewing Angle | Wide viewing angles (120 degrees) |
| Waterproof Rating | IP68 (Waterproof, Dustproof, Shockproof) |
| Horizontal Resolution | 420 TV lines |
| Effective Pixels | NTSC: 648×488 pixels |
| Power Supply | DC 12V-24V |
| Operating Temperature | -20°C to 70°C, RH95% MAX |
| Storage Temperature | -40°C to 85°C, RH95% MAX |
| Night Vision | 18 IR LEDs |
| Guiding Line | No (as per package contents) |
| Lens Material | Plastic |
| Shell Material | Plastic |
| Connection Type | Wired (4-pin cable) |
| Cable Length | 10 meters (32.8 feet) |
4. Setup & Installation
Follow these steps to properly install your car monitor and camera system:
4.1. Monitor Mounting
- Attach the monitor to the provided mount bracket.
- Secure the bracket to a suitable flat surface in your vehicle's cabin using the two-sided adhesive tape or screws. Ensure the monitor is positioned for optimal viewing without obstructing your driving view.
- Adjust the monitor angle as needed.
4.2. Camera Installation
Mount the camera securely at the rear of your vehicle, ensuring a clear view of the area behind. The camera features a 360° adjustment angle for precise positioning.
- Loosen the screw on the camera bracket.
- Rotate the camera lens to the desired angle.
- Tighten the screw to fix the camera in position.
4.3. Wiring Diagram
The system uses a 4-pin aviation connector cable for stable connection and waterproofing. The included cable is 10 meters (approximately 32.8 feet) long, suitable for larger vehicles.
- Power Connection: Connect the monitor's power cable to a DC 12V-24V power source in your vehicle.
- Camera Connection: Connect the camera to the monitor using the 4-pin aviation connector video cable.
- Reverse Trigger (Optional): To enable automatic switching to the camera view when reversing, connect the monitor's reverse trigger wire (typically red) to your vehicle's reverse light power supply. If you intend to use the system as a full-time monitor, this connection is not strictly necessary.
5. Operating Instructions
The monitor can be operated using the buttons on the front panel or via the included remote control.
5.1. Monitor Controls
- V1/V2 (AV1/AV2 push button): Switches between video input channels (if two cameras are connected).
- Switch (Screen Switch): Toggles display modes or functions.
- MENU (Menu button): Accesses the on-screen display (OSD) menu for settings.
- Reduce (Volume-): Decreases volume or navigates menu options.
- Increase (Volume+): Increases volume or navigates menu options.
- Power on/off (Power standby): Turns the monitor on or off, or puts it into standby mode.
- Infrared receiver: Receives signals from the remote control.
5.2. Remote Control Functions
- POWER: Switches power supply.
- VIDEO (V1/V2): Selects video input (V1 or V2).
- MENU: Activates the menu for adjusting brightness, colors, and contrast.
- MODE: Selects display results.
- VOL-: Reduces volume.
- VOL+: Increases volume.
5.3. Automatic Switching
When the camera is connected to the reverse light circuit, the monitor will automatically switch to the camera view (V2) when the vehicle is put into reverse. When shifting out of reverse, the monitor will return to the previous display mode or turn off, depending on your wiring configuration.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor screen and camera lens. For stubborn dirt, a slightly damp cloth with mild cleaner can be used, but avoid harsh chemicals or abrasive materials.
- Connections: Periodically check all cable connections, especially the 4-pin aviation connector, to ensure they are secure and free from corrosion. The silicone case on the cable helps maintain waterproofing.
- Camera Lens: Keep the camera lens clear of dirt, snow, or ice for optimal image quality.
- Environmental Protection: While the camera is IP68 waterproof, extreme temperatures or prolonged exposure to harsh weather conditions can affect its lifespan.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor / Monitor does not power on. |
|
|
| Poor image quality / No signal from camera. |
|
|
| Monitor does not switch to camera view when reversing. |
|
|
8. User Tips
- Full-Time Monitoring: If you wish to have the camera view displayed continuously, you do not need to connect the reverse trigger wire. Simply ensure the monitor is powered on and the correct video input is selected. This is useful for security monitoring or constant rear visibility.
- Cable Length: The included 10-meter (approximately 32.8 feet) cable is designed for larger vehicles. Ensure the cable is routed safely and securely, away from moving parts or heat sources, and that all connections are waterproofed using the silicone case.
- Adjusting Parking Lines: The monitor supports adjustment of reversing lines (width and vertical position) through the menu. Access the menu using the 'MENU' button on the monitor or remote control to customize these settings to your vehicle's dimensions.
9. Warranty & Support
For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official Inefala website. Keep your purchase receipt as proof of purchase for any warranty claims.