SWEVY SW6013

Contents

SWEVY SW6013 Digital Lux Meter User Manual

Model: SW6013 | Brand: SWEVY

1. Introduction

The SWEVY SW6013 Digital Lux Meter is a portable and precise instrument designed for measuring light intensity (illuminance) and environmental temperature. Featuring a 180° rotatable probe and a high-quality silicon photonic sensor, it offers a wide measurement range and fast response, making it suitable for various applications from home interiors to professional settings.

SWEVY SW6013 Digital Lux Meter with rotatable probe and display showing 485 Lux and 29.8°C
Figure 1: SWEVY SW6013 Digital Lux Meter Overview

Key features include data locking, maximum/minimum value display, auto shut-off, and unit conversion between Lux and Foot-Candle (Fc).

2. Package Contents

Please check the package for the following items:

  • 1 x SWEVY SW6013 Digital Lux Meter
  • 1 x User Manual (this document)
  • (Batteries are NOT included)

3. Setup

3.1 Battery Installation

The SWEVY SW6013 requires AAA*3 batteries (not included) for operation. Follow these steps to install the batteries:

  1. Grasp the battery cover on the back of the device and push down gently to open the battery compartment.
  2. Align the batteries with the positive (+) and negative (-) marks indicated inside the compartment.
  3. Insert three AAA batteries with the correct orientation.
  4. Close the battery compartment cover securely.
Diagram showing steps for battery installation in the SW6013 Lux Meter. Step 1: Open battery compartment. Step 2: Insert batteries with correct polarity.
Figure 2: Battery Installation Guide

4. Operating Instructions

4.1 Device Layout and Buttons

Diagram of SW-6013 body dimensions and labeled parts: Light Intensity Probe, Main unit display screen, Power button, Unit switch key, Backlight lamp, Lock Key/MAX/MIN.
Figure 3: SW-6013 Body Dimensions and Labeled Parts
  • Light Intensity Probe: The sensor for measuring illuminance. It is 180° rotatable for flexible measurement angles.
  • Main unit display screen: LCD screen displaying Lux/Fc readings and temperature.
  • Power button (red): Turns the device ON/OFF.
  • MODE button: Cycles through measurement modes (Data Hold, Max, Min).
  • UNIT button: Switches between Lux and Foot-Candle (Fc) units for illuminance, and Celsius (°C) and Fahrenheit (°F) for temperature.
  • Backlight lamp button: Toggles the display backlight.

4.2 Basic Measurement

  1. Press the Power button to turn on the device. The display will light up.
  2. Point the Light Intensity Probe towards the light source or area you wish to measure. Ensure the probe is clean and unobstructed.
  3. The current illuminance (Lux or Fc) and environmental temperature (°C or °F) will be displayed on the screen.
  4. Use the UNIT button to switch between Lux and Fc, or °C and °F as needed.
  5. To turn off the device, press the Power button again. The device also features an automatic shut-off after 5 minutes of inactivity to save power.

4.3 Advanced Measurement Modes

The SW6013 offers three measurement modes:

  • Data Hold (HOLD Lux): Press the MODE button once to freeze the current reading on the display. Press again to release.
  • Maximum Value (MAX): Press the MODE button repeatedly until "MAX" appears on the screen. The device will display the highest illuminance value recorded since entering this mode.
  • Minimum Value (MIN): Press the MODE button repeatedly until "MIN" appears on the screen. The device will display the lowest illuminance value recorded since entering this mode.
Display showing HOLD Lux, MIN, and MAX modes on the SWEVY SW6013 Digital Lux Meter.
Figure 4: Measurement Modes (Data Hold, Max, Min)

4.4 Environmental Temperature Measurement

In addition to light intensity, the SW6013 measures ambient temperature in real-time. The temperature range is -10°C to 50°C.

SWEVY SW6013 Digital Lux Meter displaying both Lux and temperature readings.
Figure 5: Environmental Temperature Measurement

4.5 Video Demonstration

Video 1: Digital Illuminance Meter Features and Button Introduction. This video demonstrates the device's numerical locking, high resolution, unit conversion, environmental temperature display, high-quality sensors, and button functions.

5. Specifications

FeatureDetail
ModelSW6013
Measuring range1~200000lux
Measurement accuracy≤10000Lux (±4% rgd ±10)
>10000Lux (±5% rgd ±10)
Illuminance resolution1LUX
Temperature range-10~50°C
Temperature Resolution0.1°C
Repetitive Testing±2%
Sampling frequency2 times/second
Power Supply MethodAAA*3 batteries
ScreenHD backlight screen
Storage ambient temperature-10~60°C
Storage environment humidity0%~90%RH
Operating environment temperature0~40°C
Operating environment humidity≤80%RH without condensation
ProbeCan be rotated 180° to the right
Data lockAvailable
Maximum/Minimum valueAvailable
Auto Shut-offAvailable (after 5 minutes of no operation)
Low voltage displayAvailable

Note: Manual measurement may have 1-2mm error. Please refer to the actual received product.

6. Maintenance

  • Keep the device clean and dry. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure the light intensity probe is free from dust and debris for accurate readings.
  • When not in use for extended periods, remove the batteries to prevent leakage and damage to the device.
  • Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • Device does not turn on: Check if batteries are installed correctly and have sufficient charge. Replace with new batteries if necessary.
  • Inaccurate readings: Ensure the light intensity probe is clean and unobstructed. Avoid measuring in areas with rapidly changing light conditions.
  • Display is dim or flickering: Batteries may be low. Replace them.
  • Auto shut-off too frequent: This is a power-saving feature. The device will turn off after 5 minutes of inactivity. To continue use, simply press the power button again.

8. User Tips

  • For consistent readings, try to hold the meter at the same height and angle relative to the light source during comparative measurements.
  • When measuring ambient light, ensure no shadows are cast by your hand or body onto the sensor.
  • Utilize the MAX/MIN modes to capture peak or lowest light levels over a period, useful for analyzing light fluctuations.
  • The 180° rotatable probe allows for easy measurement in awkward spaces or for directional light sources.

9. Warranty and Support

For any issues or questions regarding your SWEVY SW6013 Digital Lux Meter, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.