Introduction
The Xiaomi Sound Party Wireless Bluetooth Speaker (Model: MDZ-39-DB) is a portable smart audio system designed to deliver powerful sound with enhanced bass and long battery life. It features advanced connectivity options, a durable waterproof design, and customizable lighting to enrich your audio experience.

Figure 1: Xiaomi Sound Party Speaker highlighting design awards.
Video 1: Unboxing and feature demonstration of the Xiaomi Sound Party speaker.
Setup
1. Unboxing and Initial Inspection
Carefully remove the speaker and all accessories from the packaging. Verify that all components listed in the 'Package Contents' section are present and undamaged.
2. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided charging cable to the speaker's charging port and a compatible power adapter (5V 3A, 9V 3A, or 12V 2A). A full charge typically takes approximately 4 hours with a 12V 2A adapter.

Figure 2: The speaker supports PD fast charging and reverse charging, allowing it to act as a power bank.
3. Power On/Off
- Power On: Press and hold the power button (
) located on the top panel until the indicator light illuminates. - Power Off: Press and hold the power button again until the indicator light turns off.
4. Bluetooth Pairing
- Turn on the speaker.
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing light.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Xiaomi Sound Party" from the list of devices.
- Once connected, the speaker will emit a confirmation sound, and the indicator light will become solid.

Figure 3: Side controls including the Bluetooth pairing button.
5. NFC Quick Connection
For devices supporting NFC (Android 8.1 and above), enable NFC on your device and tap it against the NFC area on the speaker to establish a quick Bluetooth connection. Ensure your device is set to 'BT input' if necessary.
6. TWS (True Wireless Stereo) Mode
To pair two Xiaomi Sound Party speakers for stereo sound:
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- Press the TWS button on one speaker (this will be the primary speaker).
- The primary speaker will search for the secondary speaker.
- Once connected, both speakers will play audio in stereo.
7. Party Connect
Link up to 100 speakers for synchronized playback. Connect your phone to one speaker, then broadcast to other speakers in Party Mode. This allows for effortless control of large party venues.

Figure 4: Multiple speakers demonstrating TWS and Party Connect capabilities.
Operating the Speaker
1. Basic Controls
The speaker features intuitive controls on its top panel:
- Power Button (
): Press and hold to power on/off. - Volume Down (-): Press to decrease volume.
- Play/Pause (
): Press to play or pause music. - Volume Up (+): Press to increase volume.

Figure 5: Top panel controls of the speaker.
2. Hands-Free Calls
With its built-in microphone, the speaker allows you to answer calls directly. When a call comes in, press the Play/Pause button to answer or end the call.

Figure 6: Speaker in a home setting, illustrating hands-free call functionality.
3. 3D Colorful Lighting
The speaker features ambient lighting designed to pulse with the rhythm of your music, enhancing the party atmosphere. The lighting effects can be customized or turned off to conserve battery.

Figure 7: The speaker's 3D colorful lighting in action.
4. Bass Boost Mode
Activate the Bass Boost mode by pressing the dedicated 'BASS' button on the side panel to enhance low-frequency sounds for a more impactful audio experience.
Maintenance
1. Cleaning
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or other chemical solvents, as these may damage the surface.
2. Water and Dust Resistance (IP67)
The speaker boasts an IP67 rating, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. While it works in light rain and splashes, avoid prolonged submersion or exposure to high-pressure water jets.

Figure 8: The speaker's IP67 water and dust resistance makes it suitable for outdoor use.
3. Battery Care
- To prolong battery life, avoid fully discharging the speaker frequently.
- Store the speaker in a cool, dry place when not in use for extended periods.
- Charge the speaker regularly, even if not in use, to maintain battery health.
Troubleshooting
If you encounter any issues with your Xiaomi Sound Party speaker, please refer to the following common solutions:
- No Power: Ensure the speaker is fully charged. Connect it to a power source and try turning it on again.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the speaker is properly paired via Bluetooth.
- Bluetooth Pairing Issues: Make sure the speaker is in pairing mode (flashing indicator light). Turn off and on Bluetooth on your device, or try pairing with a different device to isolate the issue.
- Poor Sound Quality: Ensure your device is within the effective Bluetooth range (up to 25m). Check for any obstructions between the speaker and your device.
For more detailed troubleshooting steps and technical support, please consult the official user manual PDF available at: Xiaomi Sound Party User Manual (PDF).
Specifications
| Feature | Specification |
|---|---|
| Name | Xiaomi Sound Party |
| Model | MDZ-39-DB |
| Colour | Black |
| Product Dimensions | 255 x 92 x 92mm |
| Net Weight | Approx. 1200g |
| Rated Output Power | 1x35W (Woofer) and 1x15W (Tweeter) |
| Frequency Range | 60Hz to 20KHz |
| Signal-to-Noise Ratio | ≥80dB |
| Battery | Lithium-ion, 7.3V, 5200mAh |
| Battery Charging | 5V 3A, 9V 3A, 12V 2A (12V 2A 4 hours) |
| Power Bank Output | 5V 3A (Max) |
| Bluetooth Version | 5.4 |
| Transmission Distance | 25m |
| Playback Time | Approx. 26 hours (at 50% Volume, 3D light off, Bass Boost off) |
| Waterproof Rating | IP67 |
| Stereo Pair (TWS) | Yes |
| Party Connect | Yes, ≤100 units |
| Microphone | Built-in Mic |
Package Contents
- Xiaomi Sound Party Speaker x1
- Charging cable x1
- User manual x1
User Tips
- Enhance Sound: For an even more effective audio experience, consider using an external equalizer (e.g., Xeq equalizer) with your connected device.
- Optimal Use: This speaker is excellent for indoor use and performs well outdoors for small gatherings. For very large parties, its output might not be sufficient.
- Car Use: Many users find it convenient to use the speaker connected in their car for enhanced audio performance and higher volume.
- Product Authenticity: The Xiaomi Sound Party speaker is known for its robust build quality and substantial weight, which are indicators of its original design and quality.
Warranty and Support
For information regarding warranty coverage, service, and support, please refer to the warranty card included in your package or consult the comprehensive user manual PDF available at: Xiaomi Sound Party User Manual (PDF). This document contains detailed information on product care, safety guidelines, and regulatory compliance.