OWLLON T43 Hall-Linear Multifunctional Wireless Game Controller

1. Introduction

The OWLLON T43 is a versatile wireless gaming controller designed for a wide range of platforms, including Android, iOS, PC, PlayStation 4 (PS4), PlayStation 3 (PS3), and Nintendo Switch (N-S). It offers multiple connection options: wireless Bluetooth, remote control, USB wired, and wireless 2.4G (with an optional receiver). This controller is equipped with high-precision Hall-Linear joysticks, dual vibration motors (note: no gyroscope, no tactile feedback), a continuous firing (turbo) function, and editable macro programming capabilities. Its ergonomic design ensures comfortable use during extended gaming sessions.

Note: The vibration function is not supported when connected to mobile phones (Android/iOS).

2. Specifications

3. Setup and Connection

The T43 controller supports multiple connection methods. Please follow the instructions carefully for your desired platform.

3.1. Bluetooth Connectivity

Ensure your device's Bluetooth is enabled and discoverable before attempting to connect.

• Android Connection (V3 Game Mode): Press and hold the A + HOME keys simultaneously. LED1 will flash. Once connected successfully, LED1 will remain lit. This mode is suitable for games downloaded from the Android market.
• Android Connection (Standard HID Mode): Press and hold the X + HOME keys simultaneously. LED3 will flash. Once connected successfully, LED3 will remain lit. This mode is for game hall games.
• iOS Connection (MFi Mode): Press and hold the B + HOME keys simultaneously. LED4 will flash. Once connected successfully, LED4 will remain lit. This mode is for games on the Shanwan MFi APP.
• PS3 Connection:
  1. Connect the controller to the PS3 host using a USB cable. LED1 will light up.
  2. Press the HOME button. After a successful Bluetooth connection, LED1 will light up.
  3. You can now remove the USB cable and play games wirelessly on the PS3 host.
• PS4 Connection:
  1. Connect the controller to the PS4 host using a USB cable. LED1 will light up.
  2. Press the HOME button. After a successful Bluetooth connection, LED4 will light up.
  3. You can now remove the USB cable and play games wirelessly on the PS4 host.
• Nintendo Switch Connection:
  1. Press and hold the R2 + HOME keys simultaneously. LED2 and LED3 will flash.
  2. Once successfully connected, you can play games on the Nintendo Switch console.
  3. Note on Button Mapping: The controller has an XBOX button layout. When connected to the Nintendo Switch, the button mapping will be:
     • Controller A outputs Switch B
     • Controller B outputs Switch A
     • Controller Y outputs Switch X
     • Controller X outputs Switch Y
• PC Connection (X-input): Press and hold the R1 + HOME keys simultaneously. LED1, LED2, and LED3 will flash. After successful connection, you can play PC X-input games.

3.2. 2.4G Wireless Connection (Optional)

If your controller package includes a 2.4G receiver, you can use it for wireless connection to compatible devices, typically PCs.

1. Insert the 2.4G USB receiver into an available USB port on your PC or compatible device.
2. Turn on the controller. The controller should automatically pair with the receiver.
3. Refer to the specific platform's connection instructions if issues arise.

3.3. USB Wired Connection

For a direct and stable connection, or for charging, use a USB cable.

1. Connect one end of the USB cable to the controller's charging port.
2. Connect the other end to a USB port on your gaming console or PC.
3. The controller will function as a wired controller and charge simultaneously.

4. Operating Instructions

4.1. Basic Controls

Familiarize yourself with the controller's layout and functions:

• Hall Rocker: High-precision analog joysticks for smooth and accurate 360-degree movement.
• ABXY Buttons: Standard action buttons. Refer to the Nintendo Switch connection note for specific mapping on that platform.
• D-Pad: Directional pad for precise digital input, ideal for fighting games or menu navigation.
• Shoulder Buttons (L1/R1) & Triggers (L2/R2): Located on the top of the controller for various in-game actions.
• HOME Button: Central button used for powering on/off the controller and accessing system-level menus.
• LED Indicators: Multiple LEDs (LED1, LED2, LED3, LED4) provide visual feedback on connection status, player number, and charging status.

4.2. Vibration Function

The controller features a dual vibration motor to enhance your gaming experience with haptic feedback. This function is active on compatible consoles (PS3, PS4, Nintendo Switch) and PC. As noted, vibration is not supported when connected to Android or iOS devices.

4.3. Continuous Firing (Turbo) Function

The T43 controller supports a continuous firing (Turbo) function, allowing you to rapidly repeat a button press by holding it down. To activate or deactivate this feature for specific buttons, please refer to the detailed instructions in the full digital manual or the manufacturer's support documentation. Typically, this involves pressing a 'Turbo' button simultaneously with the desired action button.

4.4. Macro Programming

The editable macro function allows you to record a sequence of button presses and assign it to a single button for quick execution. This is particularly useful for complex combos or repetitive tasks in games.

General Steps for Macro Programming (specific steps may vary; consult full manual):

1. Enter Programming Mode: Locate the dedicated 'Macro' or 'Set' button (if available) and hold it for a few seconds until an indicator light changes, signaling entry into programming mode.
2. Record Sequence: Press the desired sequence of buttons in the order you want them to be executed.
3. Assign Macro: Press the button you wish to assign the recorded macro to (e.g., a back paddle or an unused button).
4. Exit Programming Mode: Press the 'Macro' or 'Set' button again to save the macro and exit programming mode.

For detailed instructions on macro programming, including how to clear macros, please consult the full digital manual or manufacturer's support resources.

5. Charging the Controller

The controller is equipped with a built-in 550 mAh rechargeable battery. To charge your controller:

1. Connect the controller to a power source (e.g., gaming console, PC, or a standard USB wall adapter) using the provided USB cable.
2. The LED indicators on the controller will typically show the charging status. They may flash while charging and become solid when fully charged.
3. A full charge usually takes approximately 2-3 hours.
4. Once fully charged, the controller provides approximately 6-8 hours of continuous usage time.

6. Maintenance and Care

To ensure the longevity and optimal performance of your T43 controller, please follow these maintenance guidelines:

• Keep Dry: Protect the controller from water, moisture, and excessive humidity. Avoid using it in damp environments.
• Temperature: Do not expose the controller to extreme temperatures (hot or cold) or direct sunlight for prolonged periods.
• Cleaning: Clean the controller regularly with a soft, dry, lint-free cloth. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the surface and internal components.
• Storage: Store the controller in a clean, dry, and safe place when not in use to prevent accidental damage.
• Avoid Disassembly: Do not attempt to disassemble, modify, or repair the controller yourself. This can void the warranty and may cause further damage.
• Handle with Care: Avoid dropping the controller or subjecting it to strong impacts.

7. Troubleshooting

If you encounter any issues with your T43 controller, please refer to the following troubleshooting guide:

8. User Tips

• Full Charge for Best Performance: Always ensure your controller is fully charged before starting long gaming sessions to avoid interruptions.
• Platform Switching: When switching between different gaming platforms, always perform the correct pairing procedure (e.g., A+HOME for Android, R2+HOME for N-S) to ensure a stable connection.
• Macro Customization: Take advantage of the macro programming feature to create custom button sequences for your favorite games, which can significantly enhance your gameplay efficiency.
• Wired for Stability: If you experience any wireless input lag or disconnections, especially during competitive gaming on PC, consider using the USB wired connection for maximum stability.
• Check Game Compatibility: Some games, particularly older titles or those not designed for controllers, may require third-party software or specific settings to function correctly with the T43 controller.

9. Warranty and Support

The OWLLON T43 Hall-Linear Multifunctional Wireless Game Controller comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, duration, and coverage, please refer to the product packaging or contact the original seller.

For technical support, troubleshooting assistance beyond this manual, or to inquire about warranty claims, please reach out to the customer service department of the retailer where you purchased the product or visit the official OWLLON support website.

Please retain your purchase receipt or proof of purchase, as it will be required for any warranty-related services.