1. Introduction
Thank you for choosing the HOMCOM Ergonomic Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.

This office chair is designed for comfort and support during long sitting hours, featuring a high back, adjustable height, and a relaxing swing function. It is constructed with a double high-density foam pad and covered in a breathable linen effect fabric.
2. Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Follow the assembly instructions carefully. Incorrect assembly can lead to instability and injury.
- Do not stand on the chair.
- Do not use the chair as a step stool.
- Keep children away from the chair during assembly. Small parts may be a choking hazard.
- Do not exceed the maximum weight capacity of 120 kg.
- Regularly check all bolts and screws to ensure they are tight. Retighten if necessary.
3. Assembly Instructions
The chair requires assembly. Please follow the steps below. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Assembly Steps:
- Attach Wheels to Base: Insert the five caster wheels into the holes at the ends of the chair base (star base).
- Insert Gas Lift: Place the gas lift cylinder into the central hole of the assembled chair base.
- Attach Mechanism to Seat: Secure the mechanism plate to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
- Attach Armrests: Fasten the armrests to both sides of the seat cushion using the designated screws.
- Attach Backrest: Connect the backrest to the armrests using the remaining screws. Ensure a secure fit.
- Connect Seat Assembly to Gas Lift: Carefully place the assembled seat (with mechanism, armrests, and backrest) onto the gas lift cylinder, ensuring the central hole of the mechanism aligns with the top of the gas lift. Press down firmly to secure.
4. Operating Instructions
4.1. Seat Height Adjustment
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards. Release the lever at the desired height to lock it in place.
4.2. Swing/Tilt Function
The chair features a tilt function for relaxation. To activate the tilt, pull the lever on the left side, beneath the seat, outwards. To lock the chair in an upright position, push the lever inwards.

You can also adjust the tension of the rocking mechanism. Turn the round knob located at the front, under the seat, clockwise to increase tension (making it harder to tilt) or counter-clockwise to decrease tension (making it easier to tilt).
4.3. Swivel and Mobility
The chair is equipped with 360° swivel capability and smooth-rolling PU wheels, allowing for easy movement across various floor surfaces without causing damage.

5. Maintenance
5.1. Cleaning
- For general cleaning, wipe the fabric with a soft, damp cloth.
- For tougher stains, use a mild fabric cleaner and follow the product instructions. Test on an inconspicuous area first.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the fabric and finish.
- Vacuum the chair regularly to remove dust and debris.
5.2. General Care
- Periodically check all screws and bolts and tighten them if they have become loose.
- Avoid exposing the chair to direct sunlight for prolonged periods, as this may cause fading.
- Keep the chair away from heat sources to prevent material degradation.
6. Specifications
The HOMCOM Ergonomic Office Chair is designed with the following specifications:

| Feature | Detail |
|---|---|
| Color | Grey |
| Material | Fabric (100% polyester), High-density foam, Steel |
| Overall Dimensions (L x W x H) | 63 cm x 70 cm x 102-112 cm |
| Seat Dimensions (L x W) | 50 cm x 48 cm |
| Adjustable Seat Height | 50 cm - 60 cm |
| Backrest Dimensions (L x H) | 50 cm x 61 cm |
| Pillow/Cushion Thickness | 12 cm (seat and backrest) |
| Weight Capacity | 120 kg |
| Installation Method | Assembly Required |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 62 cm x 32 cm x 58 cm |
| Package Weight | 14.0 kg |


7. Troubleshooting
- Chair feels wobbly: Check all assembly screws and bolts. Tighten any loose connections. Ensure the chair is on a flat, even surface.
- Gas lift not adjusting height: Ensure the height adjustment lever is fully engaged or disengaged. If the issue persists, the gas lift may need replacement.
- Chair not tilting or tilting too easily/hard: Check the tilt lock lever. Adjust the tilt tension knob located under the seat to achieve the desired resistance.
- Wheels not rolling smoothly: Check for any debris (hair, lint) caught in the wheels. Clean them if necessary.
8. User Tips
- For optimal ergonomic support, adjust the seat height so your feet are flat on the floor and your knees are at a 90-degree angle.
- Utilize the swing function for short breaks to relieve pressure and promote circulation.
- Take regular breaks from sitting to stretch and move around, even with an ergonomic chair.
- Position your monitor at arm's length and at eye level to reduce neck and eye strain.
9. Warranty and Support
For any questions, concerns, or issues regarding your HOMCOM Ergonomic Office Chair, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.