1. Introduction
The LOCOR Eco Solvent Printer Xp600 I3200 1.6m is a wide-format printing machine designed for high-quality outdoor and indoor advertising applications. With 14 years of professional manufacturing experience, LOCOR offers a reliable, well-designed, and affordable solution for various printing needs. This manual provides essential information for the setup, operation, and maintenance of your printer.
2. Key Features
- Reliable quality with competitive pricing.
- Lifting capping station designed to protect the print head.
- Automatic paper-detecting device with a warning system for low media.
- Negative pressure ink supply system for improved ink flow.
- Intelligent and synchronous external heater for optimal drying.
- Adjustable print head to accommodate various media thicknesses.
- Control program integrated with Maintop RIP software for easy operation and high compatibility.
- Equipped with Epson XP600 or I3200 print heads.
- Supports Eco solvent, water-based, and sublimation inks.
- Gigabit Ethernet port for data transmission.
3. Setup Guide
3.1 Unpacking and Assembly
Carefully unpack the printer from its plywood case. Assemble the stand and attach the main printer unit according to the included assembly instructions. Ensure all components, including the take-up device and external heater, are securely installed.
3.2 Power Connection
Connect the printer to a compatible power source (110V/220V, 50Hz/60Hz) using the provided power cord. Ensure the power supply is stable and meets the printer's requirements (Min: 32W, Max: 2300W).
3.3 Ink Installation
Fill the 1500ml ink tanks with the appropriate Eco solvent, water-based, or sublimation ink. The negative pressure CISS (Continuous Ink Supply System) is designed for efficient ink delivery. Follow the specific instructions for your ink type to prevent contamination or damage.
3.4 Software Installation
Install the Maintop RIP software from the provided U disk. ONYX/Photoprint are optional alternatives. The U disk also contains ICC profiles and the user manual. Ensure the software is correctly installed and configured for your operating system.
3.5 Media Loading
Load your chosen media (e.g., PP self-adhesive vinyl, flex banner, photo paper) onto the take-up device. The double-layer pinch rollers are designed to feed media smoothly and accurately. The auto paper-detecting device will warn you if the media is running out.
3.6 Print Head Adjustment
The distance between the print head and the media can be adjusted manually to suit different media thicknesses. Refer to the detailed instructions in the PDF user manual for precise adjustment procedures.
4. Operating Instructions
4.1 Power On and Initialization
Turn on the printer using the main power switch. The printer will perform an initialization sequence. Wait for the system to be ready before proceeding.
4.2 Software Operation
Open the Maintop RIP software on your computer. Load your print job, select the appropriate media profile, resolution (e.g., 1440dpi), and print speed. Send the job to the printer via the Gigabit Ethernet connection.
4.3 Printing Process
Once the print job is sent, the printer will begin feeding the media and applying ink. Monitor the printing process to ensure smooth operation. The intelligent and synchronous external heater will assist in drying the ink as it prints.
4.4 Safety Features
The printer is equipped with a sensor that will automatically stop the carriage if it detects an obstacle on the platen or a media wrinkle, preventing damage to the print head and media.
5. Maintenance
5.1 Automatic Cleaning
The printer features an automatic cleaning system. Regularly perform cleaning cycles as recommended by the manufacturer to maintain print head health and prevent clogging.
5.2 Capping Station Care
The lifting capping station protects the print head when not in use. Ensure it is clean and free of dried ink to maintain its effectiveness.
5.3 General Cleaning
Keep the printer's exterior, platen, and rollers clean from dust and ink residue. Use appropriate cleaning solutions and lint-free cloths. Refer to the PDF user manual for detailed cleaning procedures.
6. Troubleshooting
This section addresses common issues you might encounter with your LOCOR Eco Solvent Printer.
- Printer not responding: Check power connections, USB/Ethernet cable, and ensure the printer is powered on and initialized.
- Poor print quality: Perform a print head cleaning cycle. Check ink levels. Verify media settings and ICC profiles in the RIP software. Ensure the print head height is correctly adjusted for the media.
- Media jams or feeding issues: Ensure media is loaded correctly and the pinch rollers are engaged. Check for any obstacles on the platen. The auto paper-detecting device will alert you if media is running out or improperly loaded.
- Carriage stops unexpectedly: This is often due to the safety sensor detecting an obstacle or a wrinkle in the media. Inspect the print path and platen for any obstructions or media irregularities.
- Software communication errors: Restart both the printer and the computer. Check the Ethernet cable connection. Ensure the correct printer drivers are installed.
For more detailed troubleshooting, consult the comprehensive PDF user manual.
7. Specifications
| Feature | ST-1601/1602 | ST-1801/1802 |
|---|---|---|
| Print Head | Epson XP600 / DX5 / i1600 / i3200 | |
| Print Head Number | 1/2 | |
| Print Resolution | 1440dpi (i3200 head: 3200 dpi) | |
| Feeding Width | 1620mm | 1890mm |
| Print Width | 1600mm | 1850mm |
| Print Speed (Production 4 Pass) | 24sqm/h (one i3200 head speed) | 42sqm/h (two i3200 heads) |
| Print Speed (Precision 6 Pass) | 16.8sqm/h (one i3200 head speed) | 32.8sqm/h (two i3200 heads speed) |
| Ink Type | Eco solvent ink / water-based ink / Sublimation Ink / UV ink | |
| Ink Color | CMYK 4 Colors / CMYK LM LC 6 Colors / CMYK LMLC LK LLK 8 Colors | |
| Ink Tank Volume | 1500ml tank for each color | |
| Supply Type | Negative Pressure CISS | |
| Print Media (Water-based) | PP self-adhesive vinyl, backlit film, photo paper, movable PP self-adhesive vinyl, photo cloth, Sublimation Transfer Paper, etc. | |
| Print Media (Oil-based) | Flex banner, wall paper | |
| Heating System | Inside automatic smart micro control heating system | |
| Drying System | Infrared heating system with fans | |
| Media Loading & Take up System | Standard | |
| Cleaning System | Automatic cleaning | |
| Data Transmission | Gigabit Ethernet port | |
| Software | Maintop, ONYX/Photoprint (optional) | |
| Power Supply | Single Phase 110V/220V, 50Hz/60Hz | |
| Operating Environment | Temperature 15°C-30°C, Relative humidity 40-60% | |
| Power Consumption | Min: 32W, Max: 2300W | |
| Package Size | 230kg/2850*766*665mm | 270kg/2950*766*665mm |
8. User Tips
- Print Head Awareness: Always confirm the number and type of print heads installed in your machine (e.g., one XP600 head, two i3200 heads) as this affects performance and maintenance.
- Software Compatibility: While Maintop RIP software is included, ensure it is compatible with your operating system for seamless operation.
- Media Selection: Experiment with different media types to achieve desired print results for various applications like outdoor banners, indoor wallpaper, or vehicle wraps.
9. Warranty and Support
9.1 Warranty Information
The LOCOR Eco Solvent Printer comes with the 'Shop's Three Guarantees' for after-sale service. Specifically, the mainboard is covered by a one-year quality warranty.
9.2 Technical Support
For further assistance, technical support, or detailed instructions, please refer to the comprehensive user manual available in PDF format. This document contains in-depth information on installation, operation, maintenance, and troubleshooting.
You can access the official user manual PDF here.