Irok MG75 MAX Magnetic Switch Keyboard User Manual

1. Introduction

Thank you for choosing the Irok MG75 MAX Magnetic Switch Keyboard. This high-performance gaming keyboard features an all-aluminum CNC body, advanced magnetic switches, ultra-low latency, and customizable ARGB lighting. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new keyboard.

The Irok MG75 MAX keyboard, showcasing its vibrant RGB lighting.

2. Setup

2.1 Package Contents

Ensure all components are present in the package:

• Irok MG75 MAX Magnetic Switch Keyboard
• USB Cable (Wired connection)
• User Manual (this document)

2.2 Connecting the Keyboard

1. Unpack the Irok MG75 MAX keyboard and its USB cable.
2. Connect one end of the USB cable to the keyboard's USB port.
3. Connect the other end of the USB cable to an available USB port on your computer.
4. The keyboard should be automatically recognized by your operating system.

2.3 Driver Installation

The Irok MG75 MAX utilizes a self-developed dual-end driver system (Web Driver / Client Driver) for advanced customization and optimal performance. While basic functionality is plug-and-play, installing the dedicated driver is recommended for full features, including lighting effects, macro programming, and precise actuation settings.

• Web Driver: Access the web-based driver interface through your browser for convenient settings adjustments.
• Client Driver: Download and install the client driver software for more in-depth customization and performance tuning. Refer to the official Irok website for the latest driver downloads.

The user interface for the Irok MG75 MAX Web Driver / Client Driver.

3. Operating Instructions

3.1 Key Features

• Magnetic Switches: Experience rapid activation and instant emergency stops with 0.001mm step accuracy. The RT lift accuracy is recommended to be set to 0.1 under the 0 dead zone setting for optimal performance.
• Ultra-Low Latency: Achieves a theoretical minimum latency of 0.125ms with real 32K full-key scanning and 8K report rate support.
• GTURBO Magnetic Shaft Algorithm: An AI-powered algorithm that learns user habits and dynamically balances motion errors, adjusting the temperature control curve to minimize contact interruption and maintain ultra-high precision.
• ARGB Lighting: Independent IC 500Hz high refresh rate for each LED bead, providing lower flicker and better, eye-friendly lighting effects.
• Full-Key Magnetic Axis MIX Function: The new generation adaptive technology is compatible with mainstream high-precision magnetic axes, offering fully replaceable and adaptable magnetic axis components.

Key performance metrics of the Irok MG75 MAX keyboard.

3.2 Customization and Macros

Utilize the Web Driver or Client Driver software to customize your keyboard:

• Lighting Effects: Adjust ARGB lighting patterns, colors, and brightness.
• Key Mapping: Remap keys to suit your preferences.
• Macros: Program complex sequences of commands using the KME (Key Macro Editor) function.
• Music Rhythm (TGL): Synchronize lighting effects with audio output.
• Press Key Macro (MT): Assign macros to specific key presses.

4. Maintenance

4.1 Cleaning

To clean your keyboard, disconnect it from your computer. Use a soft, dry cloth to wipe down the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the keyboard. Avoid harsh chemicals or abrasive materials.

4.2 Waterproofing (IP54 Level)

The Irok MG75 MAX keyboard features IP54 level waterproofing, thanks to PCB nanotechnology that forms a sparse surface, allowing liquids to slip away. This provides protection against:

• Splash-proof: Effectively protects against water splashes in daily life.
• Non-high-pressure water: Cannot withstand direct spray from high-pressure water jets.
• Non-immersion: Cannot protect against being submerged in water.
• No harmful water ingress internally: Cannot prevent harmful water ingress (e.g., beverages, etc.).

Note: Damage caused by immersion in liquid is not covered under warranty.

The keyboard's PCB nanotechnology provides IP54 level waterproofing.

5. Troubleshooting

5.1 Keyboard Not Responding

• Ensure the USB cable is securely connected to both the keyboard and the computer.
• Try connecting the keyboard to a different USB port on your computer.
• Restart your computer.
• If using a USB hub, try connecting the keyboard directly to the computer.

5.2 Lighting Issues

• Check the keyboard's lighting settings through the Web Driver or Client Driver software.
• Ensure the brightness is not set to minimum or turned off.
• Update the keyboard firmware via the driver software.

5.3 Keys Not Registering Correctly

• Clean the affected keys to ensure no debris is interfering with the magnetic switches.
• Verify key mappings in the driver software.
• If the issue persists, consider performing a factory reset (refer to driver software documentation for instructions).

6. Specifications

The following table outlines the key specifications for the Irok MG75 MAX keyboard:

Detailed specifications for the MG75 series keyboards.

7. Warranty and Support

The Irok MG75 MAX keyboard comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official Irok website or contact customer support. Keep your proof of purchase for warranty claims.

For technical support, driver updates, or further assistance, please visit the official Irok support page or contact their customer service department.

8. User Tips

• Experiment with Actuation: The magnetic switches allow for highly customizable actuation points. Use the driver software to find the perfect balance between responsiveness and accidental key presses for your gaming style.
• Macro Efficiency: Take advantage of the macro programming features to automate repetitive tasks or complex in-game actions, giving you a competitive edge.
• Lighting Personalization: Explore the extensive ARGB lighting options to create a personalized aesthetic that matches your setup or mood.