Manuals+

MOC MOC Display Stand for X-Wing Space Fighters

MOC Building Block Display Stand User Manual

For X-Wing Space Fighter Models 75102, 75149, 75218

Introduction

This manual provides detailed instructions for assembling and using your new MOC Building Block Display Stand. Designed for compatibility with popular X-Wing Space Fighter models, this stand offers a stable and aesthetically pleasing way to showcase your completed building block creations. Please read this manual thoroughly before assembly and use.

Safety Information

  • WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
  • Recommended age for assembly and use is 14 years and older.
  • Keep away from open flames and high temperatures.
  • Do not modify the stand in any way not described in this manual.

Package Contents

Before you begin assembly, please verify that all parts are present. The package typically includes:

  • Building block pieces for the display stand (approximately 50 pieces).
  • A PDF Building Guide (sent via email).

Note: Dolls and printed parts for the X-Wing model are not included with this display stand.

Assembly Instructions

The assembly process for the MOC Building Block Display Stand is guided by a detailed PDF instruction manual. This guide is typically sent to your email address after purchase. If you have not received it, please contact customer support.

  1. Access the PDF Guide: Locate the PDF Building Guide sent to your email. It contains step-by-step visual instructions for assembly.
  2. Prepare Your Workspace: Ensure you have a clean, flat, and well-lit surface to assemble the stand.
  3. Sort Pieces: Organize the building block pieces according to the PDF guide to facilitate easier assembly.
  4. Follow Steps: Carefully follow each step outlined in the PDF guide. Pay attention to the orientation and connection points of each block.
  5. Verify Assembly: Once assembled, ensure all connections are secure and the stand is stable before placing your model on it.
Image indicating PDF Building Description for the stand
Figure 1: Image highlighting the availability of a PDF Building Description for assembly.
Assembled MOC Display Stand, front view with blue pins
Figure 2: Front view of the fully assembled display stand, showing the connection points.
Assembled MOC Display Stand, side view with blue pins
Figure 3: Side view of the fully assembled display stand, illustrating its structural support.

Usage Guidelines

Once assembled, the display stand is ready to support your X-Wing Space Fighter model.

  1. Placement: Choose a stable, flat surface for the display stand and your model.
  2. Model Compatibility: This stand is designed to support X-Wing Space Fighter models 75102, 75149, and 75218. Ensure your model is compatible.
  3. Mounting the Model: Carefully place your X-Wing model onto the designated connection points of the display stand. Ensure it is balanced and securely seated.
  4. Display: Position the stand and model in your desired display location.

Care and Maintenance

  • Cleaning: To clean the display stand, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the plastic material.
  • Storage: If disassembling for storage, keep all pieces together in a container to prevent loss.
  • Inspection: Periodically check the stand for any loose connections or damaged parts. Reassemble or replace parts as needed to maintain stability.

Troubleshooting

Problem Possible Cause Solution
Stand is unstable after assembly. Pieces not fully connected or incorrect assembly. Review the PDF Building Guide and ensure all blocks are securely snapped into place. Check for any misplaced pieces.
Model does not fit securely on the stand. Incorrect model type or improper placement. Verify that your model is one of the compatible X-Wing Space Fighter models (75102, 75149, 75218). Adjust the model's position on the stand's connection points.
Missing PDF Building Guide. Email delivery issue or overlooked email. Check your spam/junk folder. If still not found, contact customer support with your order details to request a resend.

Specifications

Feature Detail
Product Type Building Block Display Stand
Compatibility X-Wing Space Fighter models 75102, 75149, 75218 (and similar compatible models)
Material ABS Plastic
Block Size Small building block (Compatible with Lego)
Plastic Block Shape Self-Locking Bricks
Is Electric No Battery
Recommended Age 14+ years
Certification CE
Origin Mainland China
Package Weight 0.03 kg
Package Dimensions (L x W x H) 20 cm x 10 cm x 10 cm

User Tips

Based on common user experiences and questions:

  • Double-Check Instructions: If you encounter difficulty during assembly, re-read the PDF guide carefully. Sometimes a small detail can be missed.
  • Organize Pieces: Before starting, sort your blocks by type or color as suggested in the PDF. This can significantly speed up assembly.
  • Gentle Pressure: Apply firm but gentle pressure when connecting blocks to avoid damage.
  • Display Stability: For larger or heavier models, ensure the stand is placed on a very stable surface to prevent accidental tipping.

Warranty and Support

For any issues, missing parts, or questions regarding your MOC Building Block Display Stand, please contact the seller directly through the platform where you made your purchase. Provide your order number and a clear description of the issue for prompt assistance.

The seller typically offers support for product-related inquiries and can assist with resending the PDF building guide if needed.