1. Introduction
The UGREEN 13-in-1 USB-C Hub is a versatile docking station designed to expand the connectivity of your laptop or compatible device. It transforms a single USB-C port into a powerful workstation, offering triple display output, high-speed data transfer, fast charging, and essential peripheral connections. This manual provides detailed instructions for setting up and operating your hub to maximize its potential.
Image: UGREEN 13-in-1 USB-C Hub, highlighting its triple monitor extend feature, 4K60Hz support, 2xHDMI+DP, USB-A/C 10Gbps, and aluminum alloy shell.
2. Package Contents
- UGREEN 13-in-1 USB-C Hub (Model: CM681-15978)
- Instruction Manual (this document)
Note: Wall charger and USB-C cable for power input are not included and must be purchased separately.
3. Product Overview (Ports and Features)
The UGREEN 13-in-1 USB-C Hub provides a comprehensive array of ports to meet your connectivity needs:
Image: Detailed diagram of the UGREEN 13-in-1 hub, showing all ports and their specifications.
- 1x USB-C Power Delivery (PD 100W): For charging your laptop (up to 85W output) and powering the hub.
- 1x DisplayPort (DP 4K@60Hz): Connects to an external monitor for high-resolution video output.
- 2x HDMI (4K@60Hz): Connects to external monitors for high-resolution video output.
- 1x USB-C 3.2 Gen 2 (10Gbps): For high-speed data transfer. Note: This port is for data transmission only and does not support video output or charging.
- 2x USB-A 3.2 Gen 2 (10Gbps): For high-speed data transfer with USB-A devices.
- 2x USB-A 3.0 (5Gbps): For standard data transfer with USB-A devices.
- 1x Audio/Mic (3.5mm): For connecting headphones, speakers, or a microphone.
- 1x RJ45 Ethernet (1000Mbps): Provides a stable and fast wired internet connection.
- 1x SD Card Slot (104MB/s): For reading SD memory cards.
- 1x TF Card Slot (104MB/s): For reading Micro SD (TF) memory cards.
Image: Visual representation of the 13-in-1 connectivity, emphasizing charging, data transfer, and triple display capabilities.
4. Setup Instructions
-
Connect the Hub to Your Laptop: Plug the integrated USB-C cable from the UGREEN hub into a Thunderbolt 3/4 or full-featured USB-C port on your laptop.
-
Connect Power (Optional but Recommended): For stable operation and laptop charging, connect a USB-C Power Delivery charger (up to 100W) to the USB-C PD port on the hub. This will provide up to 85W pass-through charging to your laptop.
Image: Diagram illustrating 100W input to the hub and 85W output for laptop charging.
-
Connect External Displays:
- For HDMI monitors, use HDMI cables to connect them to the HDMI ports on the hub.
- For DisplayPort monitors, use a DisplayPort cable to connect to the DP port on the hub.
Image: Close-up view of the HDMI and DisplayPort connections on the hub.
-
Connect USB Devices: Plug your USB-A and USB-C peripherals (e.g., keyboard, mouse, external hard drives, flash drives) into the corresponding USB ports on the hub.
-
Connect Ethernet: For a wired network connection, plug an Ethernet cable into the RJ45 port on the hub.
Image: Close-up of the Ultra-Fast Ethernet port on the hub.
-
Insert SD/TF Cards: If needed, insert your SD or Micro SD (TF) cards into the dedicated card reader slots.
-
Connect Audio Devices: Plug your 3.5mm headphones or speakers into the audio/mic jack.
Image: Illustration of how the hub helps organize a workspace by consolidating connections.
5. Operating Instructions
Once all connections are made, your laptop should automatically detect the UGREEN 13-in-1 USB-C Hub and connected devices. No additional drivers are typically required for basic functionality on compatible operating systems.
5.1 Data Transfer
The hub supports high-speed data transfer:
- USB 3.2 Gen 2 Ports (USB-C and USB-A): Up to 10Gbps for rapid file transfers.
- USB 3.0 Ports (USB-A): Up to 5Gbps for standard data transfer.
- SD/TF Card Slots: Up to 104MB/s for quick access to memory card content.
Image: Visual representation of 10Gbps data transfer speed through the hub's ports.
5.2 Charging
Connect your laptop's USB-C power adapter to the hub's USB-C PD port. The hub will pass through up to 85W of power to charge your laptop while reserving 15W for its own operation and connected peripherals.
6. Display Modes
The UGREEN 13-in-1 USB-C Hub supports various display configurations depending on your operating system.
Image: A user working with a triple 4K display setup, demonstrating enhanced productivity.
6.1 Windows Display Modes
For Windows operating systems, the hub supports Mirror Mode and Extend Mode across single, dual, and triple display setups.
Image: Diagrams illustrating Mirror Mode (A, B, B) and Extend Mode (A, B, C, D) for Windows.
- Mirror Mode: All connected external displays show the same content as your laptop screen.
- Extend Mode: Each connected external display can show different content, extending your desktop workspace.
- Triple Display (Windows): Supports 4K@60Hz for any two video ports, and 4K@30Hz for the remaining one video port.
6.2 macOS Display Modes
Due to limitations of macOS, all extended monitors will display the same content when connected to a MacBook.
Image: Diagrams illustrating Mirror Mode (A, A, A) and Non-Mirror Mode (A, B, B) for macOS, with a note about the limitation.
- Mirror Mode: All connected external displays show the same content as your MacBook screen.
- Non-Mirror Mode: While you can connect multiple displays, all external displays will mirror each other, showing the same content, which is different from your MacBook screen.
6.3 Display Resolution Table
Image: A table detailing supported resolutions for single, dual, and triple display configurations on Windows and macOS.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | CM681-15978 |
| Interface Type | USB Type-C |
| Standard | USB 3.2 Gen2 |
| Ports | 13 |
| Functions | Card Reader, RJ45, DP, 3.5mm Audio, USB-A, USB-C, Charging, HDMI-Compatible |
| Video Output | 2x HDMI (4K@60Hz), 1x DisplayPort (4K@60Hz) |
| USB Data Ports | 1x USB-C 3.2 Gen 2 (10Gbps), 2x USB-A 3.2 Gen 2 (10Gbps), 2x USB-A 3.0 (5Gbps) |
| Ethernet | 1x RJ45 (1000Mbps) |
| Card Reader | SD/TF (104MB/s) |
| Audio Port | 1x 3.5mm Audio/Mic |
| Power Delivery | 100W Input, 85W Output to laptop |
| Compatible Systems | Windows, Linux, Chrome OS |
| Compatible PC Devices | Laptop |
| Certification | CE, FCC |
| Shell Material | Aluminum Alloy |
| Product Dimensions | Approx. 20cm (L) x 20cm (W) x 2cm (H) (Based on package dimensions) |
| Product Weight | Approx. 0.2 kg (Based on package weight) |
Image: Close-up of the hub's aluminum alloy casing, highlighting its heat dissipation properties.
8. Maintenance
- Keep the hub away from water, fire, and corrosive substances.
- Avoid dropping or subjecting the hub to strong impacts.
- Clean the hub with a soft, dry cloth. Do not use liquid cleaners.
- Ensure proper ventilation around the hub, especially during extended use, to prevent overheating. The aluminum alloy shell is designed for efficient heat dissipation.
- When not in use, disconnect the hub from your laptop and power source.
9. Troubleshooting
9.1 No Display Output / Flickering Screen
- Ensure your laptop's USB-C port supports video output (DisplayPort Alternate Mode).
- Verify that all display cables (HDMI, DP) are securely connected to both the hub and the monitors.
- Try connecting one monitor at a time to isolate the issue.
- Ensure your monitors are set to the correct input source (HDMI 1, HDMI 2, DP).
- Check your laptop's display settings to detect and configure the external monitors.
- If using multiple displays, ensure your laptop's graphics card can support the desired resolution and refresh rate.
- For macOS, remember that all extended monitors will display the same content.
9.2 Laptop Not Charging
- Ensure a compatible USB-C PD charger (up to 100W) is connected to the hub's USB-C PD input port.
- Verify that your laptop's USB-C port supports Power Delivery.
- Check the USB-C cable connecting the charger to the hub and the hub to the laptop for damage.
9.3 USB Devices Not Recognized / Slow Data Transfer
- Ensure the hub is securely connected to your laptop.
- Try connecting the USB device directly to your laptop to confirm it's working.
- Disconnect and reconnect the USB device to the hub.
- If connecting a high-power USB device (e.g., external HDD), ensure the hub is connected to a power source.
- For optimal data transfer speeds, use the 10Gbps USB 3.2 Gen 2 ports for compatible devices.
9.4 Ethernet Connection Issues
- Verify the Ethernet cable is securely connected to both the hub and your router/modem.
- Check your laptop's network settings to ensure the Ethernet adapter is enabled and configured correctly.
- Try a different Ethernet cable.
10. User Tips
- Power Priority: Always connect your laptop's power adapter to the hub's PD port first, especially when using multiple high-power devices or external displays, to ensure stable performance.
- Cable Quality: Use high-quality HDMI, DisplayPort, and USB-C cables to ensure optimal performance, especially for 4K video output and 10Gbps data transfer.
- Driver Updates: While generally plug-and-play, ensure your laptop's graphics drivers and USB-C port drivers are up to date for the best compatibility and performance.
- Heat Management: The aluminum alloy casing helps dissipate heat. Avoid placing the hub in enclosed spaces or covering it during operation to maintain optimal temperature.
11. Warranty and Support
UGREEN products are designed for reliability and performance. For warranty information, technical support, or further assistance, please refer to the official UGREEN website or contact their customer service directly.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)