IRALAN YH4

Contents

IRALAN Luxury Crystal Ring Chandelier User Manual

Model: YH4

Brand: IRALAN

1. Introduction

Thank you for purchasing the IRALAN Luxury Crystal Ring Chandelier. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and keep them for future reference.

2. Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS:

  • If you are unsure about your ceiling/wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
  • We recommend installation of this pendant lamp be performed by a licensed electrician.
  • Ensure the power supply is turned off at the main circuit breaker before installation, cleaning, or maintenance.
  • This product is designed for indoor use only.
  • Do not modify the product in any way, as this may void the warranty and create safety hazards.

3. Package Contents

Please verify that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, contact your retailer.

  • 1 x Chandelier Unit (available in 1-circle 36CM, 1-circle 55CM, or 2-circles 36+55CM variants)
  • 1 x Remote Control
  • 1 x Instruction Manual
  • Mounting Hardware (screws, anchors, wire connectors)
Chandelier components in packaging
Image: Chandelier components as received in packaging.

4. Assembly Instructions

Note: Two people are required to safely install this product. Place all contents on a carpeted or padded area to protect them from damage during assembly.

  1. Mounting the Ceiling Plate

    Secure the metal ceiling plate to the ceiling using the provided mounting hardware. Ensure the plate is firmly attached to a suitable structural support.

    Close-up of metal ceiling plate with adjustable steel wires
    Image: Detail of the metal ceiling plate and adjustable steel wire drawing mechanism.
  2. Wiring Connections

    Connect the neutral (N) and live (L) wires from your ceiling's electrical box to the corresponding wires on the chandelier. Use appropriate wire connectors and ensure all connections are secure and insulated.

  3. Securing the Lamp Body

    Carefully lift the chandelier body and attach it to the mounted ceiling plate. Ensure it is securely fastened according to the specific design of your model.

  4. Adjusting Suspension Wires

    Adjust the length of the steel suspension wires to achieve your desired hanging height. The drop cord is adjustable up to a maximum of 120cm.

    Installed 1-circle chandelier showing ceiling mount
    Image: An installed 1-circle chandelier, showing the secure ceiling mount.

5. Operating Instructions

5.1. Remote Control Operation

The chandelier comes with a remote control for convenient operation. Pairing is completed at the factory, so no initial pairing operation is required under normal circumstances.

Diagram of the remote control with button functions
Image: Remote control layout with labeled buttons for various functions.

Remote Control Functions:

  • Turn On/Off: Power button to switch the light on or off.
  • Brightness Control: Use '+' and '-' buttons to adjust brightness from 10% to 100%.
  • Color Temperature Control: Use 'K+' (Cold) and 'K-' (Warm) buttons to adjust the color temperature.
  • Pre-set Brightness: Buttons for 'Full/Half Bright' and 'Fully Bright' for quick adjustments.
  • Sleep Mode: Activates a low-light setting for comfortable sleep environments.
Diagram showing stepless dimming with brightness and color temperature control
Image: Visual representation of stepless dimming, allowing adjustment of both brightness and color temperature.
Diagram illustrating infinite dimming with warm white, neutral white, and cold white color temperatures and brightness adjustment
Image: Infinite dimming capabilities, showing transitions between Warm White (3000K), Neutral White (4500K), and Cold White (6500K), along with brightness levels from 10% to 100%.

5.2. APP Operation (LampSmart Pro)

For advanced control and smart features, you can operate the chandelier using the LampSmart Pro application.

  1. Download the APP: Scan the QR code below or search for "LampSmart Pro" in your device's app store to download the application. Select the appropriate version for your device.

    QR code for LampSmart Pro App

    Image: Placeholder for QR code to download LampSmart Pro App.

  2. Pairing the Device: Open the LampSmart Pro APP, select a room, then click on the '+' icon. Enter the equipment name (e.g., "Chandelier") and confirm.

    To match the code, click the dedicated code matching button on the remote control within 5 seconds of turning on the light. The light source flashing or a

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.