BALASHOV BALASHOV 20 Bar Semi-Automatic Espresso Machine

Contents

BALASHOV 20 Bar Semi-Automatic Espresso Machine

Model: 20 Bar Semi-Automatic Espresso Machine

Brand: BALASHOV

1. Introduction

Thank you for purchasing the BALASHOV 20 Bar Semi-Automatic Espresso Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee machine. Please read all instructions carefully before use and keep this manual for future reference.

2. Product Overview

Familiarize yourself with the components of your espresso machine.

Product Diagram of BALASHOV Espresso Machine
Figure 1: Product Diagram
1. Cup Warmer
2. Steam Dial Knob
3. Portafilter
4. Water Tank with Lid
5. Touch Control Panel
6. One-Cup Button
7. Two-Cup Button
8. Steam Wand & Hot Water Spout
9. Removable Drip Tray
10. Tamper & Measure Scoop
11. Coffee Filter for One-cup
12. Coffee Filter for Two-cup

Confirm all parts before disposing of the carton. Safely dispose of all plastic bags and other packaging materials, as they may be potentially dangerous to children.

3. Specifications

FeatureSpecification
Product TypeEspresso Coffee Maker Machine
MaterialPlastic, Stainless Steel
ColorBlack / White (depending on model)
Voltage220-240V (EU Plug)
Rated Power1050W
Working Pressure20 BAR
Preheating TimeAbout 20 seconds
Water Tank Capacity1400ML (1.4L)
Drip Tray Capacity100ML
Control MethodTouch Panel; Knob Control
Working ModeCoffee Making (Single/Double Shot); Milk Foam Making
Single-Shot Coffee Capacity15ML / 0.5OZ
Double-Shot Coffee Capacity30ML / 1OZ

4. Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  1. Read all instructions before using.
  2. In case of emergency, immediately remove the plug from the power outlet.
  3. Check that the voltage indicated on the rating label matches your electrical system.
  4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
  5. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
  6. Always unplug the appliance when not in use or before cleaning. Allow to cool before adding or removing parts, and before cleaning the appliance.
  7. To protect against fire, electric shock, and personal injury, do not immerse cord, plug, or appliance in water or other liquid. Never clean the appliance or the power cord if they are humid. Avoid touching the appliance with wet hands.
  8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic areas and where it will not be tripped over.
  9. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. If you must use an extension cord, it shall be rated not less than 2000 watts. Only use an earthed socket to connect the appliance.
  10. Do not place on or near a hot gas or electric burner or in a heated oven, or on a metal surface. Do not place the espresso machine near the edge of a bench or table during operation. Ensure the surface is level, clean, and free of water and other substances.
  11. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.
  12. Use the appliance only as described in this manual. Any other use or accessory attachments not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
  13. Do not place anything other than cups for warming on top of the espresso machine.
  14. Ensure the portafilter is firmly inserted and secured into the group head before using the machine. Never remove the portafilter during the brewing operation as the machine is under pressure.
  15. Do not touch hot surfaces. Use handles or knobs.
  16. Hot water, steam, and spout are hot. Danger of burning injuries. Do not direct steam or hot water towards the body.
  17. We recommend using cold, filtered water. We do not recommend the use of de-mineralized or distilled water as this may affect the taste of the espresso and how the machine is designed to function. Do not use the machine with an empty water tank.
  18. Use only water in the appliance! Do not put any other liquids or foods in the water tank.
  19. WARNING: The filling aperture or cover or handle must not be opened during use.
  20. This appliance is intended to be used in household and similar applications only.

5. Setup and First Use

5.1. Initial Setup

  1. Unpack the machine and remove all packaging materials.
  2. Place the machine on a stable, flat, heat-resistant surface.
  3. Fill the water tank with fresh, cold, filtered water up to the MAX line.
  4. Plug the machine into a grounded electrical outlet.

5.2. First Use (Priming the Pump)

Before making coffee for the first time, or if the machine has not been used for a long time, it is recommended to prime the pump:

  1. Ensure the water tank is filled.
  2. Plug in the machine. The three indicators will blink once, then stay on, indicating heating mode.
  3. Once the machine is heated and ready (all indicators are steady), place a cup under the portafilter.
  4. Press the One-Cup or Two-Cup button. Water will dispense. Let it run for about 30 seconds.
  5. Press the button again to stop the water flow. The machine is now primed and ready for use.

6. Operating Instructions

6.1. Making Espresso

  1. Ensure the machine is plugged in and the water tank is filled.
  2. Turn on the machine. The indicators will blink during heating and become steady when ready.
  3. Choose the appropriate filter (one-cup or two-cup) and place it into the portafilter.
  4. Add desired amount of fresh ground coffee into the filter. Use the tamper to press the coffee powder firmly and evenly.
  5. Insert the portafilter into the group head and rotate it to the right until it is tightly secured.
  6. Place one or two cups on the drip tray under the portafilter spouts.
  7. Press the One-Cup or Two-Cup button. The respective indicator will blink, and espresso will start brewing.
  8. To stop brewing at any time, press the button again.
  9. After brewing, the machine will return to standby mode. Carefully remove the portafilter by rotating it to the left and discard the used coffee grounds.

6.2. Making Cappuccino or Latte (Milk Frothing)

  1. Prepare your espresso shot as described above.
  2. Fill a stainless steel milk frothing pitcher with cold, full-fat milk (approx. 80-120ml).
  3. Rotate the Steam Dial Knob from the coffee position to the steam/hot water position. The steam key will illuminate.
  4. Wait for the steam wand to heat up (a short burst of steam might be released).
  5. Immerse the steam wand tip just below the surface of the milk in the pitcher.
  6. Touch the steam key to start frothing. Move the pitcher in a circular motion to create a vortex.
  7. Continue frothing until the milk volume triples and reaches a temperature of 60-70°C.
  8. Touch the steam key again to stop frothing.
  9. Wipe the steam wand immediately with a damp cloth to prevent milk residue from drying.
  10. Pour the frothed milk into your espresso to create your desired latte or cappuccino.

6.3. Programming the Cup Size

You can customize the volume of espresso dispensed for the One-Cup and Two-Cup buttons:

  1. Prepare the portafilter with coffee and secure it in the group head.
  2. Place a cup under the portafilter.
  3. In standby mode, long press the desired button (One-Cup or Two-Cup) to start brewing.
  4. Release the button when the desired volume of espresso is reached. The new cup size will be stored.
  5. The maximum programmable volume is 120ml.

6.4. Product Video Guide

Video 1: BALASHOV Espresso Machine Operation Guide
This video demonstrates the basic steps for operating the espresso machine, including coffee brewing and milk frothing.

7. Maintenance

7.1. System Cleaning

  1. To refresh the internal parts of the system, you can repeat the coffee brewing procedures several times without coffee in the filters.
  2. Brush the inside of the group head with a soft brush from time to time.
  3. Clean the machine casing with a soft, damp cloth.
  4. The water tank, drip tray, and filters can be washed in warm water (do not use hot water).
  5. Always clean the steam wand with a soft, damp cloth immediately after each use to prevent milk residue from drying.

Note: Before attempting to clean the appliance, remove the plug from the power outlet. Do not immerse the machine and/or power cable in water or other liquids. Allow the machine to cool before starting the cleaning procedure.

7.2. Descaling

Regular descaling is essential to maintain the performance and lifespan of your espresso machine. Use a decalcifier or scale remover recommended by your machine provider.

Water TypeDescaling Frequency
Soft water (filtered water)Every 2,000 brew cycles
Hard water (tap water)Every 1,000 brew cycles

Descaling Procedure:

  1. Fill the water tank with 200ml pure water (approximately half of the total capacity).
  2. Pour 3g of scale remover into the water tank. Wait for 5 minutes or stir to dissolve.
  3. Carefully install the water tank to the correct position and long press the three buttons for no less than 3 seconds to enter descaling mode. The machine will start to work until it stops automatically.
  4. Wait for 10 minutes and pour pure water into the water tank. Enter descaling mode again to clean the machine until it stops.

8. Troubleshooting

If you encounter any issues with your espresso machine, refer to the table below for common problems and solutions.

ProblemSolution
Indicators offCheck plug or touch any button to wake up.
No coffee dispensedTurn the Dial knob to steam position to release air. Make sure the powder is correctly grinded and tamped, water tank filled and correctly fitted.
Coffee not hot enoughPreheat your cup, descale if necessary. Try with program for higher temp. setting.
Coffee comes out slowly, in dripsScale has built up in the machine, descale the machine or change powder.
No hot water or coffeeThe water tank is empty.
Noisy pumpRepeat the brewing procedure. Make sure the water tank is filled and correctly fitted.
Group head leakingMake sure the coffee is grinded at right level and portafilter well inserted and rotated on tight enough.
Indicators blinking and beepingFill in water and touch any button to stop.
Milk frothing foam not goodClean up the steam wand and make sure the air inlet hole is open, upright.

9. User Tips

  • Preheat Your Cups: For best results, always preheat your espresso cups by placing them on the cup warmer panel or by running a shot of hot water into them before brewing.
  • Grind Size Matters: The quality of your espresso is highly dependent on the grind size. Experiment with finer grinds for a stronger extraction and coarser grinds for a lighter one. A medium-fine grind is generally recommended for espresso.
  • Tamp Evenly: Ensure you tamp the coffee grounds evenly and firmly in the portafilter for consistent extraction.
  • Clean Steam Wand Immediately: Always wipe the steam wand right after frothing milk to prevent milk from drying and clogging the nozzle. A quick purge of steam can also help.
  • Regular Descaling: Follow the descaling schedule based on your water hardness to prevent mineral buildup and maintain optimal machine performance.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Energy Saving Concept: To save energy, unplug the machine when not in use for extended periods. The machine features an automatic power-off function after 8 minutes of inactivity. You can touch any button to wake it up.

© 2023 BALASHOV. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.