FOSSiBOT FAC580

Contents

FOSSiBOT FAC580 580W Alternator Charger User Manual

Model: FAC580

1. Introduction and Overview

The FOSSiBOT FAC580 is a high-efficiency alternator charger designed to provide up to 580W of power, enabling rapid charging for your power stations. It is engineered for versatile compatibility, working seamlessly with all FOSSiBOT models and approximately 99% of third-party power stations. This charger is suitable for various battery types, including AGM Lead-acid, Gel Lead-acid, LiFePO4, and NMC/NCA Battery Packs, making it an ideal solution for diverse vehicle types and power requirements.

Equipped with advanced multi-layer protection features, the FAC580 ensures the safety of your car battery, the charger itself, and the connected power station. Its professional cooling system, featuring dual fans, guarantees stable charging performance and prevents overheating, contributing to the longevity of the device.

Key Features:

  • High-Efficiency Charging: Delivers up to 580W, charging significantly faster than traditional in-vehicle cigarette chargers.
  • Versatile Compatibility: Compatible with all FOSSiBOT power stations and most third-party power stations (supporting 48V or above output).
  • Advanced Safety Features: Includes short-circuit, over-current, over-heat, and over-voltage protection.
  • Professional Cooling System: Features left fan and right vent cooling for smooth operation and stable power output.
  • Two-stage Power Switch: Automatically adjusts output power based on input voltage for optimal charging.

2. Safety Information

Please read and understand all safety instructions before operating the FOSSiBOT FAC580 Alternator Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure the charger is installed in a well-ventilated area to prevent overheating.
  • Do not expose the charger to rain, moisture, or extreme temperatures.
  • Always ensure the FAC580 switch is in the OFF position before connecting or disconnecting cables to the car battery.
  • Connect the red wire to the positive (+) terminal of the battery and the black wire to the negative (-) terminal. Incorrect polarity can cause damage.
  • The charger is equipped with multi-layer protection (High/Low Voltage, Over-Current, Circuit, Reverse, High/Low Temperature, Over-Voltage) to safeguard your car battery, charger, and power station.
  • If the input voltage is outside the specified range, the charger will automatically stop charging to prevent damage.
Diagram illustrating multi-layer protection features of the FAC580 charger.
Figure 2.1: Multi-layer Protection Diagram. The FAC580 automatically safeguards against short-circuit, over-current, over-heat, and over-voltage conditions.

3. Package Contents

Verify that all items are present in the package:

  • 1 x FOSSiBOT FAC580 Alternator Charger
  • 1 x Input Cable (5 meters)
  • 1 x Output Cable (0.5 meters)
  • 4 x Screws
  • 1 x Screwdriver
  • 1 x User Manual
Image showing the contents of the FOSSiBOT FAC580 package.
Figure 3.1: Package Contents. Includes the charger, cables, screws, screwdriver, and user manual.

4. Product Overview

Familiarize yourself with the components of the FOSSiBOT FAC580 Alternator Charger:

Diagram of the FOSSiBOT FAC580 with numbered components.
Figure 4.1: Product Display and Components.
  1. Wire terminal to MC4: Connects to the power station.
  2. Power indicator light: Displays the product's operational status.
  3. Fan: Facilitates product heat dissipation for optimal performance.
  4. Switch button: Controls power on/off and gear selection (Mode 1/Mode 2).
  5. Wire crimping terminal to O-ring terminal: Connects to the car battery.

5. Setup and Installation

Follow these steps to properly install and set up your FOSSiBOT FAC580 Alternator Charger:

  1. Connect the Cables:
    • Fix the input and output lines to the FAC580 using the provided screws.
    • Before installation, check that all product functions are working properly.
    • Connect the output and input cables of the FAC580 correctly.
  2. Track the Cables: Route the input cable from the vehicle's interior to the car battery compartment.
  3. Wire to Battery:
    • Ensure the FAC580 switch is in the OFF position.
    • Connect the input cable to the car battery:
    • Red wire → Battery + (Positive terminal)
    • Black wire → Battery - (Negative terminal)
  4. Fixed Installation: Securely fix the FAC580 onto a suitable surface on the car wall.
  5. Connect Power Station: Connect your power station to the FAC580 using the XT90-MC4 cable.
  6. Select Mode & Start Charging: Switch the FAC580 to the desired operating mode.
Installation steps 1-4 for the FOSSiBOT FAC580 charger.
Figure 5.1: Installation Steps 1-4: Connecting cables, routing, wiring to battery, and fixing the unit.
Installation steps 5-6 for the FOSSiBOT FAC580 charger, showing connection to power station and mode selection.
Figure 5.2: Installation Steps 5-6: Connecting to the power station and selecting the charging mode.

6. Operating Instructions

The FAC580 features a two-stage power switch to adapt to different charging scenarios and input voltages.

Two-stage Power Switch for Different Voltage:

The FAC580 charger automatically adjusts the output power according to the input voltage. If the input voltage falls outside the acceptable range, it will automatically stop charging to protect connected devices.

  • Mode 1 (Recommended for Driving): Road-Powered, Adventure-Ready
    • Activate this mode during journeys to charge your power station while driving.
    • Input Voltage 13.2V-14V → 300W Max Output
    • Input Voltage >14V → Auto boost to 580W (Fast Charging)
    • This mode allows you to store power with every mile of travel, providing freedom in electricity usage.
    Image depicting Mode 1 operation for road-powered charging in a vehicle.
    Figure 6.1: Mode 1 Operation - Road-Powered Charging.
  • Mode 2 (Emergency Use Only): Emergency Engine-Off Charging
    • Use this mode when urgent power is needed with the vehicle engine off.
    • Input Voltage 13.2V-14V → 300W Max Output
    • Input Voltage >14V → Auto boost to 580W (Fast Charging)
    • Input Voltage <13.2V → Auto Cuts Off (Charging stops)
    • In this mode, the FAC580 instantly powers your power station and protects your car's battery while charging.
    Image depicting Mode 2 operation for emergency engine-off charging in an RV.
    Figure 6.2: Mode 2 Operation - Emergency Engine-Off Charging.

7. Specifications

CategoryDetail
GeneralBrand: FOSSiBOT
Type: Alternator Charger
Model: FAC580
Color: Grey (also available in Black)
Power Input SpecificationsCharging Voltage Range: 12V - 18V / 24V - 33V
Under-Voltage Protection (UVP): 12V
Under-Voltage Recovery: 12.5V
Over-Voltage Protection (OVP): 35V
Over-Voltage Recovery: 31V
Output SpecificationsRated Output Power: 580W
No-Load Output Voltage: 45 - 48V
Max Output Current: 15A
Charging Efficiency: 92%
Standby Power Consumption: < 3W
Weight & SizeProduct Weight: 0.8kg
Package Weight: 1kg
Product Size (L x W x H): 18.2 x 16.2 x 4.7 cm
Package Size (L x W x H): 19 x 17 x 5 cm
Detailed specifications for the FOSSiBOT FAC580 charger.
Figure 7.1: FOSSiBOT FAC580 Detailed Specifications.

8. Maintenance

To ensure the longevity and optimal performance of your FOSSiBOT FAC580 Alternator Charger, follow these maintenance guidelines:

  • Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure the cooling fans and vents are unobstructed to allow for proper heat dissipation.
  • Regularly check all cable connections for tightness and signs of wear or damage. Replace any damaged cables immediately.
  • Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
  • Avoid dropping or subjecting the charger to strong impacts.
Diagram illustrating the professional cooling system of the FAC580 charger.
Figure 8.1: Professional Cooling System. Proper maintenance of fans and vents is crucial for preventing over-temperature.

9. Troubleshooting

If you encounter issues with your FOSSiBOT FAC580, refer to the following common troubleshooting steps:

  • Charger not turning on:
    • Check all cable connections to ensure they are secure.
    • Verify that the car battery has sufficient voltage (above 12V for 12V systems or 24V for 24V systems).
    • Ensure the power switch is in the ON position.
  • Charging is slow or intermittent:
    • Confirm that the input voltage from the car battery is within the optimal range for 580W output (e.g., >14V for fast charging in Mode 1).
    • Check for any obstructions to the cooling fans. Overheating can reduce charging efficiency.
    • Ensure the power station is compatible and correctly connected.
  • Charger automatically stops charging:
    • This is a safety feature. The charger will stop if the input voltage is too low (<13.2V in Mode 2) or too high (Over-Voltage Protection).
    • Check the car battery voltage and the vehicle's alternator output.
    • Allow the charger to cool down if it has been operating for an extended period in high temperatures.
  • Power indicator light not working:
    • Ensure the charger is receiving power and is turned on.
    • If the unit is powered but the light is off, contact support.

For persistent issues not resolved by these steps, please contact FOSSiBOT customer support.

10. User Tips

Based on general usage and product design, here are some tips for optimizing your experience with the FOSSiBOT FAC580:

  • Optimal Placement: Install the FAC580 in a location within your vehicle that allows for good airflow around the cooling vents to maximize efficiency and prevent thermal shutdown.
  • Cable Management: Securely route all cables to prevent them from being pinched, cut, or interfering with vehicle operation. Use cable ties or clips as needed.
  • Regular Checks: Periodically check the car battery's health, especially if using Mode 2 (Emergency Engine-Off Charging) frequently, to ensure it can handle the charging load without excessive discharge.
  • Power Station Compatibility: While compatible with most 48V+ third-party power stations, always verify the input specifications of your power station to ensure it matches the FAC580's output.
  • Driving Mode Efficiency: For maximum charging efficiency, utilize Mode 1 while the vehicle engine is running and the alternator is actively producing power.

11. Warranty and Support

FOSSiBOT products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official FOSSiBOT website.

For technical support, troubleshooting assistance, or inquiries regarding your FOSSiBOT FAC580 Alternator Charger, please contact FOSSiBOT customer service through their official channels. Have your product model and purchase information ready when contacting support.

© 2023 FOSSiBOT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.