MLLSE X99 Dual CPU LGA 2011-3 Motherboard

Contents

MLLSE X99 Dual CPU LGA 2011-3 Motherboard User Manual

Desktop Mainboard for Intel Xeon E5 V3/V4 Processors

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MLLSE X99 Dual CPU LGA 2011-3 Motherboard. Please read this manual thoroughly before attempting any installation or configuration to ensure proper functionality and to prevent damage to your components.

MLLSE X99 Dual Motherboard with included SATA cable and I/O baffle
Figure 1: MLLSE X99 Dual Motherboard with included accessories (SATA cable, I/O baffle).

2. Key Features

  • Dual LGA 2011-3 Sockets: Supports two Intel Xeon E5 V3/V4 series processors for powerful computing.
  • 8 x DDR4 Memory Slots: Supports up to 256GB of DDR4 memory (2666/2400/2133MHz), including REG ECC server memory.
  • M.2 NVME SSD Support: Features two NVME M.2 interfaces for high-speed storage.
  • PCI-E Expansion: Includes 2x PCI-E X16 graphics card slots and 2x PCI-E X1 slots.
  • SATA 3.0 Interfaces: Six SATA 3.0 ports for traditional storage devices.
  • Robust Power Design: Equipped with 8-pin*2 and 24-pin power connectors for stable power delivery.
  • All Solid Capacitors: Ensures fine workmanship and professional stability.
MLLSE X99 Dual Motherboard highlighting M.2 NVME slots and key features
Figure 2: Motherboard overview highlighting M.2 NVME slots and key features.

3. Specifications

FeatureSpecification
Brand NameMLLSE
ModelAtermiter X99 Dual CPU
CPU SocketLGA 2011-3 (Intel Xeon E5 V3/V4)
ChipsetIntel X99
Form FactorE-ATX (281mm x 295mm)
Memory Slots8 x DDR4
Max RAM Capacity256GB
Memory Type SupportDDR4 2666/2400/2133MHz (non-ECC/REG ECC/ECC)
Memory ChannelDouble
PCI-E Slots2 x PCI-E X16, 2 x PCI-E X1
M.2 NVME Interface2
SATA Ports6 x SATA 3.0
Storage Interface TypeSATA 3, M.2 (NVMe)
Back I/O Ports1x RJ45, PS/2 Combo, 3 x Audio Jacks, 4 x USB 2.0
Onboard LAN1x RJ45
Audio Channels5.1
USB Type SupportUSB 2.0, USB 3.0
Integrated Video CardNo
RAID SupportedNo
Battery IncludedYes (CMOS battery)
Usage ScenarioGaming, Office, Design, Industrial Computer, Workstation, Server, Mini PC, Mining, Video Rendering, MaxCompute, HPC
Motherboard dimensions showing 280mm x 295mm
Figure 3: Motherboard dimensions.
Rear I/O ports of the motherboard
Figure 4: Rear I/O ports.

4. Setup and Installation

4.1 Component Overview

Detailed diagram of the motherboard layout with labeled components like CPU fans, DDR4 slots, PCIe slots, USB ports, LAN, Audio, and power connectors.
Figure 5: Motherboard component layout.

4.2 CPU Installation

  1. Prepare the Socket: Gently press the lever on the CPU socket and lift it up. Remove the black protective cover from the socket.
  2. Align the CPU: Carefully align the CPU with the socket, ensuring the notches on the CPU match the keys on the socket. Do not force the CPU into place.
  3. Insert the CPU: Once aligned, gently lower the CPU into the socket.
  4. Secure the CPU: Lower the CPU socket buckle cover and snap the lever back into its locked position.
Four-step CPU installation diagram
Figure 6: CPU Installation Diagram.

Important CPU Compatibility Note:

  • This motherboard supports two CPUs. For dual CPU configurations, use either two identical CPU models or two different models with the same core count.
  • Mixing CPUs with different core counts (e.g., 4 cores + 6 cores) is not supported and may lead to instability or non-functionality.

4.3 Memory (RAM) Installation

  • The motherboard features 8 DDR4 memory slots. The orange-colored slots are the primary slots, and the black-colored slots are secondary.
  • Always insert memory modules into the primary (orange) slots first.
  • Ensure memory modules are fully seated by pressing down firmly on both ends until the clips snap into place.
  • This motherboard supports non-ECC, REG ECC, and ECC memory. Note that server RAM (REG ECC/ECC) may have compatibility issues with desktop RAM, so avoid mixing them.

4.4 Power Supply Connection

  • Connect the 24-pin ATX power connector from your power supply to the corresponding port on the motherboard.
  • Connect both 8-pin CPU power connectors (EPS12V) from your power supply to the motherboard.
  • A powerful power supply is required. Ensure your power supply is at least 500W and from a reputable brand to adequately support this platform.

4.5 Storage Device Installation

  • SATA Drives: Connect your SATA hard drives or SSDs to the 6 SATA 3.0 interfaces using SATA cables.
  • M.2 NVME SSDs: Install your M.2 NVME SSDs into the two dedicated M.2 slots. Secure them with the provided screw.

4.6 Graphics Card and Other PCI-E Devices

  • Insert your graphics card(s) into the PCI-E X16 slots. Ensure they are fully seated and secured with the case latch or screw.
  • Install any other PCI-E expansion cards (e.g., network cards, sound cards) into the available PCI-E X1 slots.

4.7 Front Panel Connections

  • Connect the front panel headers (Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding pins on the motherboard. Refer to the motherboard layout diagram (Figure 5) for pin locations.
  • Connect front panel USB 2.0 and USB 3.0 headers.
  • Connect front panel audio headers.

5. Operating Instructions

Once all components are installed and connected, you can power on your system. The motherboard will perform a Power-On Self-Test (POST). If all components are detected correctly, the system will proceed to boot from your installed operating system.

  • BIOS/UEFI Setup: To access the BIOS/UEFI setup utility, press the designated key (usually DEL or F2) during the initial boot sequence. Here you can configure boot order, system time, and other advanced settings.
  • Driver Installation: After installing your operating system, install all necessary drivers for the motherboard chipset, LAN, audio, and any other integrated or discrete components. These are typically provided on a driver CD/DVD or available for download from the manufacturer's website.

6. Maintenance

  • Keep it Clean: Regularly clean dust from inside your computer case, especially from CPU coolers, GPU fans, and motherboard surfaces. Use compressed air for best results.
  • Check Connections: Periodically check that all cables (power, SATA, front panel) are securely connected.
  • BIOS Updates: Check the manufacturer's website for BIOS/UEFI updates. Updates can improve stability, compatibility, and performance. Follow update instructions carefully to avoid damaging the motherboard.
  • CMOS Battery: The motherboard includes a CMOS battery. If you experience issues with system time or BIOS settings resetting, the CMOS battery may need replacement.

7. Troubleshooting

  • No Power:
    - Ensure the 24-pin and both 8-pin CPU power connectors are securely plugged into the motherboard.
    - Verify your power supply is switched on and functioning correctly.
    - Check the power button connection to the front panel header.
  • No Display:
    - Ensure your graphics card is properly seated in the PCI-E X16 slot and has adequate power connected.
    - Check that your monitor cable is securely connected to the graphics card and the monitor.
    - Try booting with only one stick of RAM in the primary (orange) slot.
  • System Instability/Crashes:
    - Ensure your power supply meets the minimum 500W requirement and is stable.
    - Check CPU and memory compatibility. Refer to section 4.2 and 4.3.
    - Verify that CPU coolers are properly installed and making good contact with the CPUs to prevent overheating.
  • Memory Not Detected / Errors:
    - Ensure memory modules are fully seated in their slots.
    - Try different memory modules or test them individually.
    - Ensure you are not mixing server RAM (REG ECC/ECC) with desktop RAM.
  • M.2 NVME SSD Not Detected:
    - Ensure the M.2 SSD is correctly installed and secured.
    - Check BIOS settings to ensure M.2 slots are enabled and configured correctly (if applicable).

8. User Tips

Based on general user experiences with similar motherboards:

  • Cooling is Key: With dual CPUs, effective cooling is crucial. Invest in high-quality CPU coolers for both processors to maintain optimal temperatures and performance.
  • BIOS Configuration: Take time to explore the BIOS settings. Optimizing settings for memory timings, CPU power management, and boot options can enhance system performance and stability.
  • Driver Updates: Always use the latest drivers for your chipset, graphics card, and other peripherals. Outdated drivers can lead to performance issues or system instability.

9. Warranty and Support

For warranty information and technical support, please refer to the seller's specific policies or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.