BSMOOM 7000A Car Jump Starter & Portable Air Compressor User Manual

Introduction

Thank you for choosing the BSMOOM Car Jump Starter and Portable Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires and other inflatables, and serve as a portable power bank and emergency light source. Please read this manual carefully before use to ensure safe and optimal operation.

What's in the Box

Please check the package contents upon opening:

BSMOOM Jump Starter Unit
Smart Jumper Cable with clamps
Type-C USB Cable
Air Hose
Air Nozzles (various adapters)
User Manual
Storage Bag

Contents of the BSMOOM Jump Starter box — Image: All components included in the BSMOOM Jump Starter package.

Specifications

Feature	Specification
Brand Name	BSMOOM
Peak Current	>1200 A
Special Features	USB, Lighting, Warning Light, SOS Lighting
Voltage	12 V
Conversion Rate	85%~90%
Battery Capacity	20000-30000 mAh (21800mAh/26800mAh variants)
Number Of Built-in Batteries	4
Origin	Mainland China
Air Compressor Pressure	Up to 160 PSI
Emergency Light Brightness	400-500 Lumen
Operating Temperature	-4°F to 140°F (-20°C to 60°C)

Dimensions of the BSMOOM Jump Starter — Image: Device dimensions: 22.00cm/8.66inch (length), 10.00cm/3.93inch (width), 5.50cm/2.16inch (height).

Setup and Initial Use

Charging the Device

Before first use, fully charge your BSMOOM Jump Starter. Connect the included Type-C USB cable to the device's Type-C input port and plug the other end into a suitable USB power adapter (not included). The display will indicate the charging status.

Charging the BSMOOM Jump Starter — Image: The jump starter being charged via its Type-C input, also showing its USB output for charging other devices.

Understanding the Display

The device features a clear 2.16-inch LED screen that shows real-time values, charging mode, power level, inflatable mode, and inflatable unit.

Clear display of the jump starter — Image: Detailed view of the device's display, indicating real-time value, charging mode, power, inflatable mode, and inflatable unit.

Operating Instructions

Jump Starting a Vehicle

Safety First: Ensure your vehicle's ignition is off and the parking brake is engaged. Wear appropriate safety gear, such as gloves and eye protection.

Insert Jumper Cable: Insert the smart jumper cable plug into the jump starting port on the BSMOOM unit.
Connect Clamps: Connect the red (+) clamp to the positive (+) terminal of your vehicle's battery and the black (-) clamp to the negative (-) terminal. Ensure a secure connection.
Start Engine: Once connected, turn on your vehicle's ignition to start the engine.
Remove Clamps: Immediately remove the clamps from the car battery once the engine starts, then disconnect the jumper cable from the jump starter unit.

Steps to jump start a car using the BSMOOM device — Image: Visual guide for jump-starting a car: 1. Insert cable, 2. Connect clamps, 3. Start engine, 4. Remove clamps.

Force Start Function (for severely discharged batteries)

If the vehicle battery is extremely low and the jump starter does not automatically detect it, you may use the force start function:

Connect Clamps: Connect the clamps to the car battery as described above.
Activate Force Start: Press and hold the "OK" button (or designated force start button) on the jump starter for more than 3 seconds.
Start Engine: Start the car engine within 30 seconds after activating force start.

Force Start Function steps — Image: Steps for using the force start function: 1. Connect clamps, 2. Press force start button for >3 seconds, 3. Start car engine.

Using the Portable Air Compressor

The device can inflate tires, bicycle tires, balls, and even swimming rings with a maximum pressure of 160 PSI.

Connect Air Hose: Screw the air hose into the inflatable interface on the jump starter unit and attach the appropriate air nozzle to the item you wish to inflate.
Power On & Select Mode: Press and hold the "OK" key to power on. Press the "M" key to switch between inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
Set Pressure: Use the "+" and "-" buttons to adjust the desired air pressure.
Start Inflation: Press "OK" to begin inflation. The device will automatically stop when the set pressure is reached.

Inflation function display and steps — Image: Visual guide for inflation: 1. Connect air hose, 2. Press "OK" then "M" to select mode, 3. Use "+"/"-" to adjust pressure, 4. Press "OK" to inflate.

BSMOOM Jump Starter inflating a car tire — Image: A person using the BSMOOM Jump Starter to inflate a car tire, highlighting its 160 PSI capability.

High capacity battery for various inflatables — Image: Examples of items that can be inflated: Auto (8 units), Motorcycle (20 units), Bicycle (36 units), Ball (60 units), Swimming Ring (80 units).

Using as a Portable Power Bank

The BSMOOM unit can charge your electronic devices via its USB output port.

Connect your device's charging cable to the USB output port on the jump starter.
The device will automatically begin charging your phone, tablet, or other USB-powered gadgets.

Man charging phone with BSMOOM Jump Starter — Image: A person charging their mobile phone using the BSMOOM Jump Starter as a portable power bank.

Emergency Lighting Functions

The device includes a powerful LED flashlight with multiple modes for emergency situations.

Flashlight: Press the light button once to turn on the steady flashlight.
Strobe: Press the light button a second time for strobe mode.
SOS: Press the light button a third time for SOS signal mode.
Press the light button again to turn off the light.

BSMOOM Jump Starter emergency light modes — Image: The BSMOOM Jump Starter demonstrating its flashlight, strobe, and SOS emergency light functions.

Maintenance

Charging: Recharge the unit every 3-6 months, even if not used, to maintain battery health.
Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Storage: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
Temperature: The device is designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C). Avoid prolonged exposure to temperatures outside this range.

BSMOOM Jump Starter operating in extreme temperatures — Image: The jump starter is shown operating effectively in both cold (-4°F) and hot (140°F) environments.

Troubleshooting

If you encounter issues with your BSMOOM Jump Starter, refer to the following common problems and solutions:

Device not turning on: Ensure the device is charged. If the battery is completely drained, it may take a few minutes of charging before it responds.
Car not starting:
- Check that the jumper cable clamps are securely connected to the correct battery terminals (red to positive, black to negative).
- Ensure the jump starter has sufficient charge.
- If the battery is severely discharged, try using the "Force Start" function.
- Verify that the vehicle's battery voltage is 12V.
Air compressor not inflating:
- Ensure the air hose is securely connected to both the device and the inflatable item.
- Check that the correct inflation mode and target pressure are set on the display.
- Verify the device has sufficient power.
Device overheating: The unit has powerful heat dissipation. If it feels excessively hot during prolonged use (e.g., continuous inflation), allow it to cool down before resuming operation.

Safety Protections

The BSMOOM Jump Starter is equipped with multiple safety features:

Reverse Polarity Protection
Reverse Connection Protection
Over Current Protection
Over Voltage Protection
Over Charge Protection
Over Load Protection
Over Discharge Protection
Short Circuit Protection
High Temperature Protection
Spark-Proof Protection

All-round safety protection features — Image: Icons representing the various safety protections: Reverse Polarity, Reverse Connection, Over Current, Over Voltage, Over Charge, Over Load, Over Discharge, Short Circuit, High Temperature, Spark-Proof.

User Tips

Always keep the jump starter charged, especially before long trips or during cold weather.
For optimal performance, store the device at room temperature when not in use.
When jump-starting, ensure the clamps have a clean, solid connection to the battery terminals.
Do not attempt to jump start a vehicle if the jump starter's battery level is critically low.
Familiarize yourself with the different inflation modes and pressure units (PSI, BAR, KPA) for accurate inflation.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

	STREX SP313 Jumpstarter Gebruikershandleiding Ontdek de STREX SP313 Jumpstarter, een veelzijdig 5-in-1 apparaat met jumpstart-, powerbank- en luchtcompressorfuncties. Deze handleiding biedt essentiële informatie voor veilig en efficiënt gebruik van uw STREX product.
	NOCO Genius Important Product Information Guide and Limited Warranty Essential safety warnings, usage guidelines, operating parameters, and warranty details for NOCO Genius portable jump starters (GB20, GB30, GB40, GB70, GB150). Covers battery care, regulatory compliance, and a 1-year limited warranty.
	NOCO Genius Boost PRO GB150 User Guide - Portable Lithium Jump Starter Comprehensive user guide for the NOCO Genius Boost PRO GB150, a portable lithium-ion jump starter for cars, trucks, and boats. Learn about features, operation, safety, and troubleshooting.
	AstroAI DK-MF139 Jump Starter & Air Compressor User Manual User manual for the AstroAI DK-MF139 Multifunctional Jump Starter and Air Compressor, detailing its features, operation, safety, troubleshooting, and specifications for automotive use.
	FLYLINKTECH BD10 Jump Starter Power Bank User Manual Comprehensive user manual for the FLYLINKTECH BD10 Jump Starter Power Bank, detailing its features, operation, and safety guidelines. Learn how to use it as a jump starter, power bank, and LED flashlight.
	NOCO Genius Boost GB500: Powerful Lithium Jump Starter User Guide Learn how to safely and effectively use the NOCO Genius Boost GB500 lithium jump starter for 12V and 24V batteries. Includes safety warnings, operating instructions, troubleshooting, and warranty information.

BSMOOM 7000A