1. Introduction
Preface
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Safety Precautions
- Install only by qualified professionals to avoid damaging vehicle electrical systems.
- Disconnect car battery before installation to prevent short circuits.
- Ensure all connections are secure and insulated to avoid fire hazards.
- Do not block airbags, driver visibility, or vehicle controls during installation.
- Avoid modifying essential vehicle safety systems or wiring.
- Operate connected devices only when parked; never distract from driving.
- Regularly check for loose connections or overheating during use.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Ensure product usage complies with local traffic laws and regulations.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Setup
Applicable System and Car Models
This module is designed for specific Volvo models with a 7-inch screen. Please verify your car model and year against the table below:
| Car Model | Years | Screen Size |
|---|---|---|
| V40 | 2015-2020 | 7" |
| V60 | 2015-2019 | |
| S60/S60L | 2015-2019 | |
| XC60 | 2015-2017 | |
| S80L | 2015-2017 |
The module is compatible with the original car's control system, as indicated by the checkmark on the car console image.

Image: Compatible Volvo models and console button for system switching.
Installation Manual
The installation process involves connecting the module to your car's existing wiring harnesses. Ensure the car battery is disconnected before starting. The module connects to the factory power harness, LVDS harness, and includes connections for camera/USB. The original car fiber optic cable is also utilized.

Image: Wiring diagram showing connections for the ANYFAR module.
DIP Settings & Switch
DIP switch settings are crucial for proper functionality. Adjust the DIP switches according to your specific car model and screen size. Note that the dial should be set to "ON". After switching the DIP, restart the decoder for changes to take effect.
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| V40 | 2015-2020 | 7" | 245 67 ON |
| V60 | 2015-2019 | 7" | 25 ON |
| S60/S60L | 2015-2019 | 7" | 25 ON |
| XC60 | 2015-2017 | 7" | 25 ON |
| S80L | 2015-2017 | 7" | 25 67 ON |
External Settings: Camera Input
The CarPlay interface supports camera input for clear rearview imagery. After connecting the camera as per the guide, you can configure it in the system settings.

Image: Diagram for connecting a rear camera to the module.
External Settings: Radar and Trajectory
To enable reversing trajectory lines and aftermarket radar options, access the system settings:
- Click "Factory mode" > "Advanced mode". Enter password "888888".
- Go to "MCU setup" and uncheck the "A0" option.
- Return to the previous level and click "Restart system" to enable the reversing rear view function.
If your aftermarket camera supports reversing trajectory lines, uncheck the A1 box. For aftermarket radar, uncheck the A2 box. To connect a front camera, select the "A3" option.

Image: MCU Setup interface for configuring radar and trajectory.
3. Operating Instructions
Function Introduction
- Apple CarPlay: Connects iPhone users to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. Enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience.
- Android Auto: Connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. Prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety.
- Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.

Image: Overview of module features including CarPlay, Android Auto, and voice control.
Wireless Connection
The module uses wireless CarPlay and Android Auto, supporting audio and video separation. Before using the wireless connection, pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.
Wireless CarPlay Connection Steps:
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name "CAR Audio_XXXX" on your phone.
- When prompted, select "Pair" and then "Use CarPlay".

Image: Steps for connecting Wireless CarPlay via Bluetooth.
Wireless Android Auto Connection Steps:
After successful Bluetooth pairing, follow the on-screen Android Auto connection process. Ensure the sound source on your iPhone is set to the original car radio.

Image: Android Auto connection prompt and audio source selection.
Control Functions
The module integrates with your original car controls, including steering wheel buttons and the central control panel.
Steering Wheel Button Control:
| Button | Operation | Function |
|---|---|---|
| Long press | Switch between OEM screen and interface screen | |
| Short press | Previous/Next song | |
| Short press | Increase volume | |
| Short press | Decrease volume |
Central Control Panel Button Control:
| Button | Operation | Function |
|---|---|---|
| Swipe/Click | Control function | |
| Double Click Short press | Switch between OEM screen and interface screen |

Image: Steering wheel and central console controls.
Online Navigation and Voice Control
Use your favorite navigation app (Google Maps, Waze, Apple Maps) to go wherever you want. The module supports intelligent voice control for hands-free operation, with sensitive voice recognition for Siri and Google Assistant.

Image: Online navigation displayed on the car screen.

Image: Intelligent voice control with Siri and Google Assistant.
4. Maintenance
To ensure the longevity and optimal performance of your ANYFAR module, follow these general maintenance guidelines:
- Regular Checks: Periodically inspect all connections for looseness or signs of overheating. Secure any loose connections immediately.
- Environmental Care: Keep the product away from water, extreme temperatures, and direct sunlight when not in use to prevent damage.
- Immediate Action: If you notice unusual smells, sounds, or malfunctions, stop using the product immediately and consult the troubleshooting section or technical support.
5. Troubleshooting
Common Problems and Solutions
- Why will the Box's Bluetooth disconnect?
The wireless CarPlay/Android Auto system uses Bluetooth for initial pairing and device information confirmation, then establishes a Wi-Fi connection for data transmission. To avoid interference, the Bluetooth connection will disconnect once Wi-Fi is established. This is normal operation. - I cannot connect CarPlay, but Bluetooth is already paired.
Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone. Go to Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings. - Why is the wireless CarPlay not stable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel. Enter the CarPlay box settings: Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on your current region.
6. Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Operating voltage | 9-16V, 14.4V (rated) | Storage temperature | -30~+85°C |
| Operating temperature | -30~+75°C | Ambient humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power consumption current | 1A (rated), 3A (Max) | Shutdown current | Current: 300mA (Clock is on) |
| Quiescent current | less than 3mA | ||
| Charging current | ≤2A; when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid products burning. | ||
7. Warranty and Support
The ANYFAR Wireless Carplay Android Auto Module comes with a 365-day warranty, ensuring quality and reliability.

Image: Quality assurance and 365-day warranty information.
For any technical issues or further assistance, please contact technical support at techsupport@anyfar.com.
A detailed user manual (PDF) is also available for download: User Manual (PDF)
8. User Tips
- Model Compatibility: This module is designed for Volvo models from 2015 onwards. If you have an older model, such as a 2014 Volvo S60, it may not be compatible. Always check the applicable model list and years.
- Control Integration: The system is designed to integrate seamlessly with your car's existing controls (steering wheel, central console). If you experience issues where Android Auto seems to control the entire car or causes unintended adjustments, double-check your DIP settings and ensure proper control mapping as per the manual.
- Installation Components: The product is described as 'plug and play' with 'non-destructive installation'. All necessary cables and harnesses for installation are typically included to retain the existing display and controls.