OWLLON KS54 switch Joycon

Contents

LinYuvo KS54 Mini Bluetooth Gamepad Controller

User Instruction Manual

1. Introduction

Thank you for choosing the LinYuvo KS54 Mini Bluetooth Gamepad Controller. This compact and versatile controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, Android, and iOS devices, as well as supporting a keyboard mode. Please read this manual carefully to ensure proper usage and to get the most out of your new gamepad.

2. Safety Information

  • Keep the device away from water and other liquids to prevent damage.
  • Do not expose the controller to extreme temperatures or direct sunlight.
  • Avoid dropping or subjecting the controller to strong impacts.
  • Do not attempt to disassemble or modify the controller, as this will void the warranty and may cause damage.
  • Use only the provided charging cable or a certified USB-C cable for charging.
  • Keep out of reach of small children.

3. Package Contents

Please check the package for the following items:

  • LinYuvo KS54 Mini Bluetooth Gamepad Controller
  • USB-C Charging Cable (not explicitly mentioned but implied by port type)
  • User Manual (this document)

4. Product Overview

The LinYuvo KS54 features a compact design with 16 responsive buttons, a D-pad (Cross key), ABXY buttons, and a HOME button. It includes a single motor for vibration feedback and adjustable colorful LED lighting.

Top view of the LinYuvo KS54 Mini Bluetooth Gamepad Controller, showing the D-pad, ABXY buttons, plus, minus, home, and screenshot buttons.
Figure 4.1: LinYuvo KS54 Controller Layout (Transparent Black)
Close-up view highlighting the silicone buttons, official button layout, precise direction control, and fast response attack features of the controller.
Figure 4.2: Button Features and Design

5. Setup and Connection

The controller supports multiple connection modes. Ensure the controller is sufficiently charged before attempting to pair.

Diagram showing multi-platform compatibility and corresponding LED light colors for each mode: SWITCH (Y+HOME, Blue LED), Android (X+HOME, Pink LED), Xinput (B+HOME, Yellow LED), Keyboard mode (A+HOME, Green LED).
Figure 5.1: Multi-Platform Compatibility and LED Indicators
  1. 5.1. Nintendo Switch Mode

    • Press and hold the Y button + HOME button simultaneously.
    • The blue light on the controller will flash quickly, indicating it's in pairing mode.
    • On your Nintendo Switch, navigate to 'Controllers' > 'Change Grip/Order'.
    • Once connected, the blue LED light between the HOME button and the screenshot button will remain solid.
    • The HOME key can be used to wake up the Switch console.
  2. 5.2. Android Mode

    • Press and hold the X button + HOME button simultaneously.
    • The pink light on the controller will flash quickly, indicating it's in pairing mode.
    • On your Android device, go to Bluetooth settings and search for available devices.
    • Select the controller from the list.
    • After connecting, the pink LED between the HOME button and the screenshot button will remain solid.
  3. 5.3. Bluetooth Xinput Mode (PC/Other Devices)

    • Press and hold the B button + HOME button simultaneously.
    • The yellow light on the controller will flash quickly, indicating it's in pairing mode.
    • On your device (e.g., PC), go to Bluetooth settings and search for available devices.
    • Select the controller from the list.
    • After connecting, the yellow LED between the HOME button and the screenshot button will remain solid.
  4. 5.4. Keyboard Mode (iOS/Other Devices)

    • Press and hold the A button + HOME button simultaneously.
    • The green light on the controller will flash quickly, indicating it's in pairing mode.
    • On your iOS device or other compatible device, go to Bluetooth settings and search for available devices.
    • Select the controller from the list.
    • After connecting, the green LED between the HOME button and the screenshot button will remain solid.

6. Operating Instructions

6.1. Basic Controls

The controller features standard gamepad buttons for intuitive gameplay:

  • D-pad (Cross key): For directional input.
  • ABXY Buttons: Action buttons.
  • +/- Buttons: Typically for Start/Select or menu functions.
  • HOME Button: Returns to the system home screen or wakes up the console.
  • Screenshot Button: Captures screenshots (functionality may vary by device).

6.2. Vibration Feedback

The controller is equipped with a single motor to provide vibration feedback, enhancing immersion in games that support this feature.

Image of the transparent black controller with visual cues indicating vibration feedback during an intense gaming scene.
Figure 6.1: Vibration Feedback in Action

6.3. Adjustable Colorful Lighting

The controller features adjustable colorful LED lights. Use the 'LIGHT KEY' (located near the HOME button) in combination with other buttons to change lighting patterns.

Diagram illustrating various lighting patterns and the key combinations to activate them: LIGHT KEY + L (Ordinary Mode), LIGHT KEY + A (Respiratory Pattern, single or double click), LIGHT KEY + B (Clockwise Monochrome or Seven Color Rear-End Mode, single or double click), LIGHT KEY + X (Order from Top Center to Bottom Center Water), LIGHT KEY + Y (Automatic Clockwise Double Rear-End Mode).
Figure 6.2: Lighting Patterns and Controls
Lighting Pattern Controls
Key Combination Lighting Pattern
LIGHT KEY + L (Click) Ordinary Mode
LIGHT KEY + A (Click) Respiratory Pattern
LIGHT KEY + A (Double Click) Respiratory Pattern
LIGHT KEY + B (Click) Clockwise Monochrome Rear-End Mode
LIGHT KEY + B (Double Click) Automatic Clockwise Seven Color Rear-End Mode
LIGHT KEY + X (Click) Order from Top Center to Bottom Center Water
LIGHT KEY + Y (Click) Automatic Clockwise Double Rear-End Mode

7. Charging the Controller

The controller has a built-in 180mAh lithium battery. To charge the controller:

  • Connect the provided USB-C charging cable to the USB-C port on the controller.
  • Connect the other end of the cable to a USB power source (e.g., computer, USB wall adapter).
  • A full charge takes approximately 2 hours.
  • The controller provides 4-8 hours of continuous gameplay on a full charge.
Image showing the controller being charged via a USB-C cable, with indicators for 2 hours charging time and 8 hours battery life, and a 180mAh battery capacity.
Figure 7.1: Charging and Battery Life Information

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the controller. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the controller regularly, even if not in active use.

9. Troubleshooting

Common Issues and Solutions
Problem Possible Solution
Controller does not turn on. Ensure the controller is charged. Connect it to a power source using the USB-C cable.
Unable to pair with device. Make sure the correct pairing mode (Y+HOME for Switch, X+HOME for Android, B+HOME for Xinput, A+HOME for Keyboard) is activated. Ensure Bluetooth is enabled on your device and the controller is within range. Try restarting both the controller and the device.
Input lag or disconnection. Ensure there are no obstructions between the controller and the device. Move closer to the device. Check for interference from other wireless devices. Ensure the controller is fully charged.
Vibration not working. Verify that the game you are playing supports vibration feedback and that the feature is enabled in the game or system settings.

10. Specifications

Feature Detail
Model Number KS54 switch Joycon
Brand Name OWLLON
Interface Type Bluetooth
Compatible Brand/Model Nintendo
Compatible Nintendo Model Nintendo Switch, Nintendo Switch OLED
Battery Capacity 180mAh Lithium Battery
Charging Time Approx. 2 hours
Battery Working Time 4-8 hours
Charging Port USB-C
Vibration Single Motor Vibration
Dimensions (L x W) 73mm (2.87 inches) x 36.5mm (1.43 inches)
Certification CE
Origin Mainland China
Image showing the dimensions of the transparent black controller: 73mm (2.87 inches) in length and 36.5mm (1.43 inches) in width.
Figure 10.1: Controller Dimensions

11. User Tips

  • Charging Port: The controller uses a USB-C port for charging, which is a modern and convenient standard.
  • Shared Gaming: Its small size makes it ideal for shared gaming sessions with friends, as shown in the product images.
  • Portability: The mini design is perfect for on-the-go gaming, easily fitting into pockets or small bags.
Two transparent black controllers being held by hands, playing a shared game on a TV screen, illustrating the 'Shared Device' feature.
Figure 11.1: Shared Gaming Experience

12. Warranty and Support

This product comes with a one-month guarantee from the date of purchase. The warranty covers manufacturing defects but does not cover damage caused by the buyer or misuse (e.g., dropping, water damage, unauthorized modifications).

For technical support or warranty claims, please contact the seller or retailer from whom you purchased the product. Provide your purchase details and a clear description of the issue.

© 2024 OWLLON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.