SEAFLO SFSP-015-02 Automatic Bilge Pump Panel Switch

1. Product Overview

The SEAFLO SFSP-015-02 is an automatic bilge pump panel switch designed for marine applications. It provides reliable control for bilge pumps equipped with an automatic float switch, offering three operational positions: Automatic, Off, and Manual. Its durable construction and versatile voltage range (12V-24V) make it suitable for various boat electrical systems.

2. Specifications

3. Setup and Installation

The SFSP-015-02 panel switch is designed for simple and clean installation. Ensure all power is disconnected before beginning installation.

1. Mounting: Choose a suitable location on your boat's panel. The panel dimensions are 75mm x 64mm (2.95in x 2.52in). Drill four 4mm (0.16in) mounting holes as indicated in the diagram below. Secure the switch panel using appropriate fasteners.
2. Wiring: Connect the switch according to the wiring diagram provided. This switch is designed to control any bilge pump equipped with an automatic float switch. Ensure proper polarity and secure all connections to prevent intermittent high current impacts.
3. Power Connection: Connect the switch to a 12V or 24V DC power source.
4. Testing: After installation, restore power and test the switch in all three positions (Manual, Off, Automatic) to ensure correct operation of the bilge pump and float switch.

Note for non-visual users: Figure 2 displays a technical drawing of the SFSP-015-02 switch. It includes front and side views with measurements in both inches and millimeters. The front view shows the overall panel dimensions (75mm x 64mm), the toggle switch with 'AUTO', 'OFF', 'MAN' labels, and a push-button. The side view details the depth (23mm / 0.91in) and the electrical terminals at the back. The wiring diagram indicates connections for the bilge pump, float switch, and power supply, with specific pin assignments for the toggle switch and LED indicator.

4. Operating Instructions

The SFSP-015-02 switch features a three-position toggle for controlling your bilge pump:

• AUTO (Automatic): In this position, the bilge pump operates automatically, activated by the connected float switch. The pump will turn on when the water level rises and the float switch is triggered, and turn off when the water level drops.
• OFF: This position completely deactivates the bilge pump and float switch, preventing any operation.
• MAN (Manual): In this position, the bilge pump runs continuously, regardless of the float switch's state. The toggle switch has a "fail-safe" spring return to the "OFF" position from "MAN" to prevent accidental continuous operation. An LED indicator will illuminate when the switch is in the "MAN" position, indicating the pump is actively running.

Always ensure the switch is in the desired position for safe and effective bilge pump management.

5. Maintenance

To ensure the longevity and reliable performance of your SEAFLO bilge pump panel switch, follow these maintenance guidelines:

• Regular Inspection: Periodically check the switch panel for any signs of corrosion, damage, or loose connections. Marine environments can be harsh, so timely inspection is crucial.
• Cleaning: Clean the switch panel with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
• Connection Integrity: Ensure all electrical connections remain tight and free from oxidation. Loose connections can lead to intermittent operation or electrical issues.
• Float Switch Check: Regularly test the connected float switch to ensure it activates and deactivates the pump correctly in the AUTO position.

6. Troubleshooting

If you encounter issues with your SFSP-015-02 bilge pump panel switch, consider the following troubleshooting steps:

• Pump Not Operating:
  • Check if the switch is in the "OFF" position.
  • Verify that the power supply to the switch and pump is active.
  • Inspect all wiring connections for looseness or corrosion.
  • Test the bilge pump directly to ensure it is functional.
  • If in "AUTO" mode, check the float switch for proper operation and obstructions.
• LED Indicator Not Lighting:
  • Ensure the switch is in the "MAN" position.
  • Check for power supply to the switch.
  • If the pump operates but the LED does not light, there might be an issue with the LED itself or its internal wiring.
• Intermittent Operation:
  • Loose or corroded wiring connections are a common cause of intermittent issues. Re-secure all connections.
  • Ensure the current rating (15A) is not being exceeded, as this can lead to inconsistent performance or damage.

If problems persist after performing these checks, it is recommended to consult a qualified marine electrician.

7. User Tips

While no specific user tips were available from reviews or Q&A, here are some general recommendations for optimal use:

• Always keep the bilge area clean to prevent debris from interfering with the float switch or pump operation.
• Familiarize yourself with the "fail-safe" spring return feature from the "MAN" position to "OFF" to avoid accidental battery drain.
• Consider carrying spare fuses appropriate for your bilge pump system.

8. Warranty and Support

For warranty information, technical support, or service inquiries regarding your SEAFLO SFSP-015-02 Bilge Pump Panel Switch, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.