1. Introduction
This manual provides detailed instructions for the installation, configuration, and maintenance of your MLLSE X99 Dual-CPU Motherboard. Designed for high-performance computing, this motherboard supports dual Intel Xeon E5 v3/v4 series CPUs and REG ECC DDR4 memory, making it ideal for demanding applications such as gaming, office work, design, industrial computing, workstations, servers, and video rendering.
The MLLSE X99 Dual-CPU Motherboard features robust construction with all solid capacitors, ensuring professional stability and high compatibility for an enhanced user experience. It includes multiple expansion slots, M.2 NVME SSD support, and comprehensive I/O ports.
For a visual overview of the product, please watch the following video:
Video: MLLSE X99 Dual-CPU Motherboard Overview
A PDF version of this user manual is available for download: User Manual (PDF)
2. Setup and Installation
2.1. Preparation Before Installation
2.1.1. Accessory Inspection
- Thoroughly inspect the X99 dual-CPU motherboard for visible damage, such as cracks in the PCB, missing or damaged electronic components. Check the CPU sockets to ensure pins are neat and free from bending or breakage.
- Examine the two CPUs for scratches or damage. Pay special attention to CPU pins (if pin type) to ensure they are intact and not bent. For LGA-packaged CPUs, inspect contacts for dirt or damage. The X99 motherboard supports Intel Xeon E5 v3 and v4 series CPUs (e.g., E5-2600 v3, E5-2600 v4).
- Prepare memory modules compatible with the motherboard and CPUs. Ensure they have no external damage and gold fingers are free from oxidation. For high stability requirements (servers, workstations), ECC memory modules are recommended.
- Prepare CPU coolers, ensuring brackets are compatible with the motherboard and CPUs, and fans operate normally.
- Prepare a suitable chassis with sufficient internal space for components and ensure motherboard mounting positions match the X99 motherboard size.
- Prepare solid-state drives or mechanical hard drives, checking for external damage and undeformed interfaces.
- Prepare a power supply with sufficient power. An X99 dual-channel motherboard generally requires a minimum of 800W, and a dual-CPU power supply must be used.
2.1.2. Tool Preparation
- A Phillips screwdriver for removing and installing screws.
- An anti-static wristband or anti-static mat. To prevent static electricity damage, wear an anti-static wristband or work on an anti-static mat.
2.2. Installation Steps
2.2.1. Installing the CPUs
- Place the X99 dual-CPU motherboard flat on the anti-static mat. Locate the two clearly marked CPU sockets.
- Open the latch of the CPU socket by gently lifting or rotating the lever.
- Take the first CPU (Intel Xeon E5 v3/v4 series), carefully align its notches or marking points with those on the CPU socket. Incorrect orientation can damage pins or prevent proper installation.
- Gently place the CPU into the socket, ensuring it fully seats. Do not press hard to avoid damage.
- Lower the latch to secure the CPU. The latch should lock easily. If there is resistance, recheck CPU orientation and position.
- Install the second CPU in the other socket using the same method.

Figure 1: CPU Installation Diagram. Steps include: 1. Press lever and lift. 2. Lift socket cover. 3. Align CPU with base and carefully place. 4. Lower cover and snap lever.
2.2.2. Installing the Memory Modules
- The X99 dual-CPU motherboard has multiple memory slots, typically divided into channel groups. For optimal performance and stability with ECC memory, install modules in the main channel slots first. For example, orange slots are main channels; install ECC modules in the first orange slots on both sides of the CPUs for dual-channel configuration.
- Take an ECC memory module, align its notch with the corresponding notch on the memory slot.
- Align the ECC memory module vertically with the slot, then press down evenly until the clips on both sides automatically pop up and secure the module with a "click" sound.
- Install remaining ECC memory modules in other appropriate slots. When installing multiple ECC memory modules, use modules of the same capacity, frequency, and brand for system stability and compatibility.
2.2.3. Installing the CPU Coolers
- For each CPU, prepare the corresponding CPU cooler. For air-cooled coolers, apply a thin, even layer of thermal paste to the CPU surface. Avoid overflow.
- Align cooler brackets with mounting holes around the CPU socket, ensuring correct direction. For screw-fixed coolers, lightly screw them in without tightening.
- Use provided tools (wrench/screwdriver) to gradually tighten screws in a diagonal pattern, ensuring even pressure on the CPU. Apply even force to avoid tilting the cooler or damaging the CPU.
- For water-cooled coolers, follow cooler instructions. Generally, install the water block first, then connect hoses and pumps securely, ensuring no leakage.
- Connect the CPU cooler fan power cable to the corresponding CPU_FAN pin on the motherboard. There are typically two CPU_FAN pins, one for each CPU cooler.
2.2.4. Installing the Motherboard into the Chassis
- Place the chassis flat and open its side panel.
- Install corresponding copper standoffs on the chassis motherboard mounting position according to the motherboard's screw holes. The number and positions must match.
- Carefully place the motherboard (with installed CPUs, ECC memory, and coolers) into the chassis, ensuring motherboard interfaces (USB, audio, etc.) align with rear panel openings.
- Secure the motherboard to the chassis with screws. Tighten screws in sequence to ensure firm installation without over-tightening.
2.2.5. Installing the Hard Drives
- For M.2 SSDs, locate the M.2 interface (usually near the CPU socket). Align gold fingers, insert at an angle, gently press down for a tight fit, and secure with a screw.
- For SATA hard drives (mechanical or SSD), install into the chassis's hard drive bay and secure with screws. Connect one end of the SATA data cable to the hard drive and the other to the motherboard's SATA interface. Connect the hard drive's power cable to the power supply's SATA power interface.
2.2.6. Installing the Power Supply
- Place the dual-CPU power supply into the chassis's power compartment, ensuring the fan faces the correct direction (usually outwards or towards the bottom vent).
- Secure the dual-CPU power supply to the chassis with screws.
- Locate the 24-pin motherboard power cable from the power supply, connect it to the 24-pin power interface on the motherboard, paying attention to direction and ensuring a secure connection.
- For each CPU, find the 4/8-pin CPU power cable from the dual-CPU power supply and connect them to the corresponding CPU power interfaces on the motherboard for stable power.
2.2.7. Connecting the Chassis Jumpers
- On the front panel of the chassis, find jumpers for the power button (POWER SW), reset button (RESET SW), power indicator (POWER LED), and hard drive indicator (HDD LED).
- Locate corresponding pins on the motherboard. Connect chassis jumpers to motherboard pins according to markings. Power and HDD indicators have positive and negative poles and must be connected correctly. Power and reset buttons have no polarity.
- If the chassis has front USB and audio interfaces, connect corresponding USB and audio jumpers to the front USB and audio pins on the motherboard.

Figure 2: Motherboard Component Layout. Labels include CPU FAN, 24PIN Power Supply, 8PIN CPU Power Supply, 4*DDR4, 8*SATA, USB 3.0, PCIE x16, PCIE x1, LAN, 4*USB 2.0, Audio, PS/2, POWER LED, POWER SW, HDD LED, RESET SW.
2.2.8. Installing the Graphics Card (if any)
- Locate the PCI-E x16 slot on the motherboard (usually at the bottom).
- Open the clip next to the PCI-E slot. Align the graphics card's gold fingers with the slot and insert it vertically with even force until fully seated.
- Press down the clip to secure the graphics card. Secure the graphics card to the chassis's mounting position with screws.
- If the graphics card requires additional power, find the corresponding 6-pin or 8-pin power cable from the dual-CPU power supply and connect it to the graphics card.
3. Operating Instructions
The MLLSE X99 Dual-CPU Motherboard serves as the central component of your computer system. Once all components are correctly installed and connected, the system can be powered on. Operating the motherboard primarily involves configuring the BIOS/UEFI settings and installing an operating system.
3.1. Initial Boot-Up and BIOS Configuration
- After completing all installations, connect the computer to a power outlet and press the power button.
- Observe if the computer starts normally. If it does, enter the BIOS/UEFI interface.
- In the BIOS/UEFI, verify that all hardware components, such as CPUs (confirm correct model), ECC memory (check if ECC function is enabled), and hard drives, are correctly identified.
- Adjust any necessary settings, such as boot order, fan speeds, or memory timings, according to your system requirements.
3.2. Operating System Installation
Once the BIOS/UEFI is configured, you can proceed with installing your preferred operating system (e.g., Windows, Linux) from a bootable USB drive or optical media.
4. Maintenance
Proper maintenance ensures the longevity and stable operation of your motherboard and system.
- Keep it Clean: Regularly clean dust from inside the chassis, especially from CPU coolers, fans, and memory slots, using compressed air or a soft brush. Dust accumulation can lead to overheating.
- Check Connections: Periodically check all cables and components (power, data, expansion cards) to ensure they are securely seated.
- BIOS/UEFI Updates: Keep your BIOS/UEFI firmware updated to benefit from performance improvements, bug fixes, and compatibility enhancements. Refer to the manufacturer's website for the latest updates and instructions.
- Thermal Paste: If CPU temperatures are high, consider reapplying thermal paste to the CPUs after a few years of use.
- Environmental Conditions: Ensure the computer operates in a well-ventilated area with stable temperature and humidity to prevent component degradation.
5. Troubleshooting
5.1. Post-Installation Inspection
- Check that all components (CPUs, ECC memory modules, coolers, motherboard, hard drives, graphics cards) are securely installed, ensuring no looseness or wobble.
- Verify all connecting cables (power, data, chassis jumpers) are correctly and securely connected, with no incorrect insertions or loose connections.
- Check for any foreign objects (screws, metal debris) inside the chassis. Clean them promptly to avoid short circuits.
- If the computer fails to start normally after connecting to power and pressing the power button, carefully review the installation process to troubleshoot the cause. Common issues include incorrect CPU or memory installation, loose power connections, or incompatible components.
5.2. Common Issues and Solutions
- System not booting/No display: Double-check CPU and RAM installation. Ensure all power cables are connected. Reseat graphics card.
- System instability/Crashes: Verify memory compatibility and ensure ECC is enabled if using ECC RAM. Check CPU cooler installation and thermal paste application. Ensure power supply is sufficient (at least 800W recommended for dual-CPU X99).
- Peripherals not detected: Check jumper connections for front panel USB/audio. Ensure hard drives are correctly connected via SATA/M.2 and have power.
- Mixed CPU core numbers: The motherboard does not support mixed use of different core numbers (e.g., 4 cores + 6 cores). Ensure both CPUs have the same core count or are the same model.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MLLSE |
| Model | Atermiter X99 Dual-CPU Motherboard |
| CPU Socket | LGA 2011-3 (Intel Xeon E5 V3/V4 CPU) |
| Processor Compatibility | Intel Xeon, Intel Xeon E Series (same model CPU combination OR different model but same core number combination) |
| Chipset | Intel X99 |
| Form Factor | E-ATX (281mm x 295mm) |
| Memory Sockets | 8 x DDR4 (Orange slots are main, black are sub) |
| Max Memory Supported | 256GB (8 x 32GB DDR4) |
| Memory Type | 2666/2400/2133MHz (non-ECC/REG ECC/ECC) |
| Memory Channel | Double |
| PCI-E Standards | PCI-E 3.0 |
| PCI-E x16 Slots | 2 |
| PCI-E x1 Slots | 2 |
| SATA Ports | 6 x SATA 3.0 |
| M.2 NVME Interfaces | 2 (Supports 2280, 2260) |
| Storage Interface Type | SATA 3, M.2 (NVMe) |
| Back I/O Ports | 1x RJ45, PS/2 Combo, 3 x Audio Jacks, 4 x USB 2.0 |
| Onboard LAN | 1x RJ45 |
| Audio Channels | 5.1 |
| Support USB Type | USB 2.0, USB 3.0 (4x USB 3.0 pins (2 groups), 4x USB 2.0 pins (2 groups)) |
| Integrated Video Card | No |
| Power Connector | 8-pin*2, 24-pin |
| Recommended Power Supply | At least 800W (dual-CPU power supply required) |
| Usage Scenario | Gaming, Office, Design, Industrial Computer, Workstation, Server, Mini PC, Mining, Video Rendering, MaxCompute, HPC |
| Package | Yes (Motherboard weight including package: ~1.5kg) |
| Battery Included | Yes (Note: Battery may be removed before shipping due to regulations) |

Figure 3: Motherboard Dimensions (280mm x 295mm)

Figure 4: Rear I/O Ports

Figure 5: Top view of motherboard highlighting M.2 NVME slots

Figure 6: Back view of the motherboard

Figure 7: MLLSE X99 Dual CPU Motherboard with included SATA cable and baffle
7. User Tips
- Patience during Setup: Some users have reported that getting the system fully functional can take time, especially when integrating with existing components. Be prepared for a thorough setup and troubleshooting process.
- Power Supply is Key: Ensure your power supply is robust enough for a dual-CPU setup. A minimum of 800W from a reputable brand is strongly recommended to ensure stability.
- Memory Configuration: Always populate the orange-colored main memory slots first for optimal performance and stability, especially when using ECC memory.
- CPU Compatibility: Avoid mixing CPUs with different core counts. For example, do not combine a 4-core CPU with a 6-core CPU. Use either two identical CPUs or two CPUs with the same core count.
8. Warranty and Support
For warranty information and technical support, please refer to the official MLLSE website or contact your point of purchase. Keep your purchase receipt as proof of purchase.
9. Important Notes and Disclaimers
- This product link includes only the X99 Dual-CPU motherboard; CPUs and memory modules are not included.
- The memory slot color or SATA port position may vary between production batches. The manufacturer continuously optimizes and upgrades the product. Such minor design variations do not affect product use.
- Due to different display and lighting conditions, the actual color of the item may vary slightly from the pictures.
- The battery in motherboard photos may be removed before shipping due to international shipping regulations.