LAUNCH X431 SmartLink HD

Contents

Launch X431 SmartLink Heavy-Duty Diagnostic Module

Model: X431 SmartLink HD | Brand: LAUNCH

1. Introduction

1.1 Product Profile

The Launch X431 SmartLink Heavy-Duty Diagnostic Module inherits LAUNCH's advanced diagnosing technology, covering a wide range of vehicles, featuring powerful functions, and providing precise test results. It enables full car and full system trouble diagnosis, including Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test, and Special Functions, through wireless/wired communication between the VCI (Vehicle Communication Interface) device and the display tablet. Additional features include remote diagnosis, ADAS, repair data, vehicle coverage, software update, diagnostic record, diagnostic feedback, and a toolbox.

1.2 Package List

The accessories may vary based on destination. Please consult the seller or check the package list supplied with your tool. The following table outlines the common components:

Launch X431 SmartLink HD Diagnostic Module with accessories in case

Figure 1: Launch X431 SmartLink HD Diagnostic Module and included accessories.

Package Contents (SmartLink C V2.0 Edition)
No.ItemDescriptionsQty.
1Display tabletCentral processor and monitor for analyzing vehicle data and showing test results.1
2VCI moduleDevice for accessing vehicle live data.1
3Password envelopePaper bearing Product S/N and Activation Code for registration.1
4Diagnostic cableConnects the VCI module to vehicle's OBD II diagnostic socket.1
5Power adaptorsTo charge the tablet through connection to AC outlet.3
6Type A to B-shaped terminal data cableTo connect the VCI module and diagnostic tool to perform vehicle diagnosis.1
7Type A to Type C data cableTo connect the tablet to PC for data exchange.1
8Non-16pin adaptor cable kit for commercial vehiclesCheck the package box for detailed non-16pin adaptor cables.(Optional)
Full set of cables and adapters for SmartLink C HD model

Figure 2: Full set of cables and adapters included with the SmartLink C HD model.

1.3 Components & Controls

The diagnostic system consists of two main components: the display tablet and the VCI device.

1.3.1 Display Tablet

The tablet serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

Diagram of the display tablet components

Figure 3: Display Tablet Components.

  1. Microphone
  2. Type-A USB Port: Connects to the VCI connector for vehicle diagnosis via data cable, or to compatible add-on modules (e.g., Videoscope) or USB storage devices.
  3. Type-C USB Port: Connects to an AC outlet for charging, or to a PC for data exchange.
  4. POWER Key: Press to turn the tablet on/off. Press and hold for 8 seconds for forced shutdown.
  5. LCD Screen: Displays test results.
  6. Speakers
  7. Rear Camera
  8. Adjustable Stand: Flips out for comfortable use at a desk or hanging on a steering wheel.

1.3.2 VCI Module (HD III)

The HD III module acts as a vehicle communication interface, reading vehicle data and sending it to the tablet wirelessly or via wired communication. LED indicators show the module's working status.

Diagram of the VCI module (HD III) components and LEDs

Figure 4: VCI Module (HD III) Components.

  1. DC-IN Power Jack: Connects the power adaptor.
  2. Diagnostic Socket: Connects the diagnostic cable.
  3. LEDs:
    • Vehicle: Lights up and flashes during communication with the vehicle.
    • Power: Illuminates solid red when powered on.
    • BT: Blue indicates Bluetooth mode.
    • I/O: Lights up when connected to the diagnostic tool via USB cable (reserved for future function extension).
    • Wireless: Lights up when functioning as a Wi-Fi hotspot or wireless adaptor.
  4. USB Port: Currently disabled, reserved for future function extension.

The SmartLink C V2.0 device offers powerful functions and can be used in several scenarios:

Diagram of the VCI module (SmartLink C V2.0) ports

Figure 5: VCI Module (SmartLink C V2.0) Ports.

  1. DB-15 Diagnostic Connector: Connects to the vehicle's DLC (Data Link Connector) port via the diagnostic cable.
  2. Touch Screen
  3. LAN/WAN Port: Connects to the modem via a crossover cable for SmartLink Super Remote Diagnostics.
  4. DC-IN Power Jack: Obtains power via the diagnostic cable to the vehicle's DLC port or an external DC power supply. Warning: Do not connect this power jack to an external DC power supply when the SmartLink C V2.0 device is properly connected to the vehicle's DLC port.
  5. Data I/O Port: Connects to the tablet for vehicle diagnosis or to a PC for J2534 reprogramming when used as a J2534 PassThru device.

2. Setup

2.1 Charging & Turning On

  1. Plug one end of the included charging cable into the tablet's charging port and the other end into the power adaptor.
  2. Connect the power adaptor to an AC outlet to begin charging. Unplug the adaptor once the tablet is fully charged. Caution: Use only the included power adaptor.
  3. To turn on, press the POWER key. If the tool is new or has been idle for a long time, charge it for at least 5 minutes before attempting to turn it on.
  4. To turn off, press the POWER key for 3 seconds, then tap Power off on the screen.

2.2 Basic Gestures

  • Single-tap: Select an item or launch a program.
  • Double-tap: Zoom in on webpages to fit text to the screen width.
  • Long press: Tap and hold an item or area to bring up a contextual menu.
  • Slide: Navigate between pages.
  • Drag: Move application icons to different locations.
  • Spread apart/pinch together: Zoom in/out by spreading or pinching two fingers on the screen.

2.3 Screen Layout

The bottom of the screen features five on-screen buttons:

  • Home: Navigates to the Android home screen.
  • Recent App: Views recently launched and running applications.
  • VCI Connection: Indicates VCI device connection status.
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

2.4 Adjust Brightness

To conserve battery power, you can adjust the screen brightness:

  1. On the home screen, tap Settings > Display > Brightness level.
  2. Drag the slider to adjust.

2.5 Change System Language

The tool supports multiple system languages:

  1. On the home screen, tap Settings > System > Language & input > Languages.
  2. Tap Add a language and choose the desired language.
  3. Tap and hold the desired language, then drag it to the top of the list to apply.

2.6 Set Standby Time

To save power, the screen will lock and enter sleep mode after a defined standby period:

  1. On the home screen, tap Settings > Display > Advanced > Sleep.
  2. Choose the desired sleep time.

2.7 Network Setup

The tablet has built-in Wi-Fi for online access, enabling registration, app downloads, email, remote diagnosis, and software updates.

  1. On the home screen, tap Settings > Network & Internet > WLAN.
  2. Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
  3. Select a wireless network. If open, it connects automatically. If encrypted, enter the password.
  4. When "Connected" appears, the Wi-Fi connection is complete. Disable Wi-Fi when not needed to conserve battery.

2.8 Register & Update

New users must complete a registration process:

  1. Launch the application and tap Login.
  2. If you are a new user, tap New Registration. Fill in the required information (Username, Password, Email, Country, Zip Code, CAPTCHA) and tap Register.
  3. Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope), then tap Activate.
  4. Tap OK to navigate to the update center and update all available software.
  5. If you are an existing member, input your username and password, then tap LOGIN.
  6. If you forgot your password, tap Retrieve password and follow on-screen instructions.

3. Connections

3.1 Preparation

  1. Ensure the ignition is off and vehicle battery voltage is 18-30V.
  2. Locate the DLC (Data Link Connector). For commercial vehicles, it's typically in the driver's cab. Consult the vehicle's service manual if needed.
  3. Connect the VCI module to the vehicle's DLC:
    • OBD II Vehicle Connection: Plug one end of the diagnostic cable into the vehicle's DLC and the other end into the VCI module's diagnostic socket, then tighten captive screws.
    • Diagram showing X-431 HDIII system connection to a commercial vehicle

      Figure 6: X-431 HDIII System Connection Diagram.

    • Non-OBD II Vehicle Connection: For vehicles with non-OBD II diagnostic sockets, a non-16pin adaptor cable is required.
    • Diagram showing expansion from passenger car configuration to integrated passenger and commercial configuration with SmartLink C 2.0

      Figure 7: SmartLink C 2.0 Configuration Expansion.

  4. Turn the ignition on. The tool is now ready for diagnosis.

3.2 Communication Setup

The tablet communicates with the VCI device via wireless or wired (USB) connection.

  • After registration, wireless communication is automatically established.
  • USB Connection: A simple and quick way to establish communication. Connect the data cable from the tablet to the VCI. The VCI navigation button will indicate successful USB connection. USB provides the most stable and fastest communication. If multiple methods are available, wired communication is prioritized.

4. Operating

4.1 Automatic Diagnosis

This function allows you to quickly scan all available systems of the identified vehicle. After successful automatic detection, the system directly outputs the scan result.

  • Ensure the VCI is properly connected to the vehicle's DLC port.
  • A stable network connection is required.
  1. Tap Automatic Diagnosis and choose the desired vehicle region.
  2. The system will automatically decode the vehicle VIN. If decoding fails, manually enter the 17-digit VIN.
  3. The tablet will automatically scan all available systems.
  4. Tap the desired system to view the test result.

4.2 Local Diagnosis

Tap Local Diagnosis to enter the vehicle selection page. Select the diagnostic software logo and follow on-screen instructions.

4.2.1 Version Information

Reads system mode, vehicle VIN, software, and ECU version information.

4.2.2 Read Fault Code

Displays detailed information of DTC records from the vehicle's control system. Caution: DTCs are only one part of diagnosis; always refer to the vehicle's service manual for testing procedures. Do not replace parts based solely on DTC definition.

  • On the diagnostic function selection screen, tap Read Fault Code.
  • Freeze Frame: View critical parameter values at the time the DTC was set.
  • Help: View help information.
  • Code Search: Search for more information online.
  • Report: Save current data in text format. Diagnostic reports are classified as Pre-Repair, Post-Repair, and Diagnostic Scan.

4.2.3 Clear Fault Code

Erases codes after reading and performing repairs. Ensure the ignition key is in the ON position with the engine off. Clearing DTCs does not fix the underlying problem; proper repairs are essential to prevent codes from reappearing.

  • On the diagnostic function selection screen, tap Clear Fault Code.
  • Confirm by tapping YES.
  • After clearing, retrieve codes again to confirm.

4.2.4 Read Data Stream

Views and records real-time live data (Parameter Identification Data - PID) from sensors and actuators, providing insight into vehicle performance and guiding repairs. Caution: If driving the vehicle for troubleshooting, always have a second person assist to avoid accidents.

  • On the diagnostic function selection screen, tap Read Data Stream.
  • Select Page/All: Select desired data stream items.
  • OK: Confirm selection.
  • Display Modes:
    • Value: Default mode, displays parameters in text list format.
    • Graph: Displays parameters in waveform graphs.
    • Combine: Used for graph merge status for data comparison (max 4 items simultaneously).
  • Min/Max: Define maximum/minimum values for alarms.
  • Customize: Select/deselect data stream items to display/remove waveforms.
  • Compare Sample: Select a sample DS file for comparison.
  • Report: Save current data in text format.
  • Record: Start recording diagnostic data. Tap to end and save. Recorded files can be replayed from More > Common > Personal center > Recorded Data.
  • Save Sample: Customize and save standard ranges of live data stream items.

4.2.5 Actuation Test

Accesses vehicle-specific subsystem and component tests. The tablet sends commands to the ECU to drive actuators, determining system integrity by reading ECU data or monitoring actuator operation.

  • On the diagnostic function selection screen, tap Actuation Test.
  • Follow on-screen instructions to complete the test.

4.2.6 Special Function

Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement.

4.3 Remote Diagnostics (Only for HD III Edition)

This module assists repair shops or mechanics in diagnosing remote vehicles and launching instant messages for improved efficiency.

  • Tap Remote Diagnosis on the Job menu.
  • Add Friends: Tap Contacts, input the partner's username in the search bar, and tap Search. The partner must be a registered user (Workshop, Technician, golo user). Tap Add friend to send a request.
  • Start Instant Messaging: After adding friends, tap their photo to enter the chat screen. Use the input field for text, or tap icons for voice messages, emojis, or more function options.
  • Launch Remote Diagnosis (Scanner-To-Scanner): Initiates remote diagnosis with other diagnostic tools equipped with this module. Tap Remote Diagnostic, then choose REQUEST CONTROL REMOTE DEVICE or INVITE REMOTE DIAGNOSE ASSISTANT.
  • Launch Remote Diagnosis (Scanner-To-PC): Allows a PC client technician to remotely control the device. Slide the switch to ON, notify the partner of the remote diagnostic web link (http://remote.x431.com), and have them input their official technician account, password, and your handset's Serial Number.

SmartLink is a powerful service system for remote vehicle diagnosis. It allows technicians (SmartLink C) to seek expertise from master technicians or repair shops (SmartLink B).

  • SmartLink C (Customer): Binds dongles, submits remote repair orders, and connects to the vehicle's DLC port to send data to SmartLink B.
  • SmartLink B (Business): Binds dongles, accepts orders from SmartLink C, and performs diagnosis with compatible tools.

5. Special (Reset) Functions

This module provides quick access to commonly performed service functions, including coding, reset, relearn, and more. Available tests vary by vehicle manufacturer, year, and model, and are subject to change with updates.

5.1 DPF Regeneration

Removes Particulate Matters (PM) from the DPF filter using combustion oxidation methods to maintain filter performance. Required when:

  • Exhaust back pressure sensor is replaced.
  • PM trap is removed or replaced.
  • Fuel additive nozzle is removed or replaced.
  • Catalytic oxidizer is removed or replaced.
  • DPF regeneration MIL is on and maintenance is performed.
  • DPF regeneration control module is replaced.

5.2 Parameter Setting

Enables setting parameters such as VIN, injector data, and EIN.

5.3 Cylinder Cut-off, Compression Test

Identifies improperly working cylinders by cutting off individual cylinders while the engine is running.

5.4 Injector Coding

Writes or rewrites injector codes in the ECU to accurately control cylinder injection quantity. Required after ECU or injector replacement.

5.5 Urea Drive (DEF)

Drives the urea pump for reverse pumping, compression, injection, and other operations via the diagnostic scanner. Required after urea pump maintenance.

5.6 Flash Data Conversion

Converts backup data into standard formats like .hex, .s19, and .bin. Required when standard format data is needed for other operations.

5.7 Data Optimization

Optimizes vehicle power by revising vehicle data.

5.8 Nox Sensor

Resets the catalytic converter learned value stored in the engine ECU after NOx fault re-initialization or NOx catalytic converter replacement.

6. Maintenance

6.1 Software Update

This module allows you to update the diagnostic software, APP, and frequently used software.

  1. Go to Upgrade Center on the Job Menu and tap the Downloaded tab.
  2. The Available tab lists software categorized as:
    • Common software: Associated with the diagnostic app (e.g., firmware, ECU aid).
    • Frequently used vehicle software: Diagnostic and Reset software.
    • Other vehicle software: Rarely used software.
  3. Tap Update to start downloading. Once downloaded, software packages install automatically.
  4. If your software subscription is due or expires, tap Renewals to enter the Mall and renew.

6.2 Common Apps

This section includes mini apps for managing personal information, VCI, and in-app system settings.

6.2.1 My Report

View, delete, or share saved reports:

  • Health Reports: Lists diagnostic reports saved from the Read Trouble Code page, sorted by Date and Make.
  • Remote Reports: Lists diagnostic reports generated during remote diagnosis.
  • Recorded Data: Lists recorded running parameters saved as .x431 files.

6.2.2 VCI Management

Manages activated VCIs and sets communication methods between the tablet and VCI module.

  1. Check "Use Wi-Fi communication mode" to automatically search for VCI modules.
  2. Tap the target VCI to pair.
  3. Wi-Fi communication modes:
    • Work in Wi-Fi hotspot: VCI and tablet connect to form a LAN network. Tablet cannot surf the Internet.
    • Work in network adaptor: Input Wi-Fi network name and password. Tablet can surf the Internet and communicate with the VCI.
  4. Activate VCI: Input Serial Number and Activation Code, then tap Activate.
  5. Firmware Fix: Upgrades and fixes VCI firmware/system. Do not cut power or switch interfaces during this process.

6.2.3 Settings

Configures application settings and views software version information.

  • Units: Configures measurement units (Metric System or English System).
  • Shop Information: Defines print information (Workshop, Address, Telephone, Fax, License Plate).
  • Printer Set: Establishes wireless connection with a Wi-Fi printer (sold separately).
  • Clear Cache: Clears App cache.
  • About: Displays software version and disclaimer.
  • Diagnostic software auto update: Sets automatic update function ON/OFF.
  • Device account management: Manages sub-accounts for VCI usage.

6.2.4 Built-in System Apps

Includes commonly used Android applications:

  • Files: File, download, application manager, and task killer.
  • E-Mail: Easy-to-use email app.
  • Camera: Takes pictures or records videos.
  • Gallery: Manages picture library.
  • Recording Master: Records tablet screen video.
  • Video Player: Supports all video formats.
  • Browser: Cross-platform web browser.
  • Calculator: Simple calculator.

Flash programming is a common procedure for vehicle repair. The SmartLink C V2.0 supports J2534 specifications for ECU reprogramming. It can function as a VCI device, a SmartLink dongle, or a J2534 PassThru device. When used as a J2534 PassThru device, it works with a PC installed with OEM diagnostic software and LAUNCH's J2534 tool (downloadable from www.cnlaunch.com).

Diagram showing J2534 PassThru device connection

Figure 8: J2534 PassThru Device Connection.

8. Troubleshooting (FAQ)

8.1 How to save power?

  • Turn off the screen when the tool is idle.
  • Set a shorter standby time.
  • Decrease screen brightness.
  • Turn off WLAN if not required.
  • Disable GPS if not in use.

8.2 Communication error with vehicle ECU?

Confirm the following:

  • Diagnostic connector is correctly connected.
  • Ignition switch is ON.
  • If issues persist, send vehicle year, make, model, and VIN using the Feedback feature.

8.3 Failed to enter into vehicle ECU system?

Confirm the following:

  • Vehicle is equipped with this system.
  • VCI dongle is correctly connected.
  • Ignition switch is ON.
  • If issues persist, send vehicle year, make, model, and VIN using the Feedback feature.

8.4 How to download the diagnostic App after resetting the tablet?

Ensure network connection before registration. After resetting, follow these steps:

  1. Launch the browser; the official Launch website (www.x431.com) should open.
  2. Tap Login, input username and password, then tap Log In.
  3. Confirm the serial number is correct, then tap APP application program and the Download icon.
  4. After download, follow on-screen instructions to install.
  5. After installation, log in with existing credentials and go to the update center to download diagnostic software.

8.5 What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language. After setting your preferred system language, go to the update center to download the corresponding diagnostic software. If it still displays in English, the software for that language is under development.

8.6 How to retrieve the login password?

If you forgot your password:

  1. Launch the application from the home screen.
  2. Tap Login on the upper right corner.
  3. Tap Retrieve password.
  4. Input product S/N and follow on-screen prompts.

9. Specifications

9.1 Display Tablet

  • Operating system: Android
  • Memory: 4GB
  • Storage: 64GB
  • Screen: 10.1 inch capacitive touch screen with 1280 x 800 pixels resolution
  • Camera: Rear-facing 8.0MP camera
  • Connectivity: Wi-Fi (802.11a/b/g/n/ac)/Bluetooth/USB
  • Working temperature: 0℃ ~ 50℃
  • Storage temperature: -20℃ ~ 70℃

9.2 VCI Module (HD III)

  • Working voltage: DC 9 ~ 36V
  • Power consumption: ≤ 3W
  • Communication: Wireless/Wired communication
  • Working temperature: 0℃ ~ 50℃
  • Working voltage: DC 9 ~ 36V
  • Power consumption: ≤ 6W
  • Communication: Wireless/Wired connection
  • Size: 204mm x 110mm x 45mm
  • Working temperature: -10℃ ~ 50℃

For a detailed PDF user manual, please refer to the official document available at: User Manual (PDF).

10. Warranty & Support

10.1 Warranty

LAUNCH electronic products are warranted against defects in materials and workmanship for one year from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for resale or use in the ordinary course of the buyer's business.

The warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.

Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty beyond what is stated herein. This warranty is in lieu of all other warranties, expressed or implied, including merchantability and fitness for a particular purpose.

10.2 Customer Service

For any questions during operation, please contact the seller or call +86-755-84557891, or send an email to overseas.service@cnlaunch.com.

11. User Tips

  • Verify Package Contents: Upon receiving your HD unit, carefully check the complete package, including the case and all cables, against the provided packing list to ensure all components are present.
  • Network Stability for Remote Diagnosis: For remote diagnosis, ensure a stable network signal and normal network connection to avoid interruptions.
  • Power Adaptor Usage: Always use the included power adaptor to charge your tool to prevent damage.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.