1. Introduction
Thank you for choosing the ARROWMAX SES Mini Electric Screwdriver. This precision tool is designed for delicate tasks requiring accuracy and efficiency, such as repairing mobile phones, computers, watches, glasses, RC cars, and headphones. This manual provides essential information on the product's features, specifications, operation, and maintenance to ensure optimal performance and longevity.
2. Package Contents
Upon unboxing, please verify that all items listed below are present and in good condition:
- 1 × Intelligent Electric Screwdriver (SES Mini)
- 1 × Aluminum Alloy Storage Case
- 1 × Instruction Manual (this document)
- 28 × S2 Steel 4 mm Bits, including:
- Phillips Bits: PH000, PH00, PH0, PH1
- Slotted Bits: SL1.5, SL2.0, SL2.5, SL3.0
- Torx Bits: T2, T3, T4
- Security Torx Bits: T5H, T6H, T8H, T10H
- Pentalobe Bits: 0.8, 1.2
- Tri-wing Bits: Y6, Y2.0
- Hex Bits: H1.3, H1.5, H2.0, H2.5, H3.0
- Triangle Bits: 2.0, 2.3
- U-type Bit: 2.6
- Cross-type Middle Plate Bit: 2.5
3. Specifications
| Parameter | Value |
|---|---|
| Product Model | SES MINI |
| Battery Voltage | 3.7V |
| Dimensions | 15 × 15 × 115 mm |
| Lithium-ion Battery Capacity | 340 mAh |
| Weight | 45 g |
| No-load Speed | 200 r/min |
| Maximum Electric Torque | 1.6 kgf·cm |
| Charging Time | 50 minutes |
| Bit Material | S2 Alloy Steel (HRC 60 hardness) |
| Body Material | Top-grade Aluminum Alloy (Al-Mg-Si or Al-Cu-Mg series) |
4. Product Features
- High Precision Torque: Delivers a maximum electric torque of 1.6 kgf·cm, suitable for delicate electronics.
- Overload Protection: Features a self-developed multi-disc manual-automatic integrated clutch for effective motor and torque protection in both electric and manual modes.
- Comprehensive Bit Set: Includes 28 industrial-standard S2 alloy steel magnetic bits with HRC 60 hardness, covering a wide range of screw types.
- Compact & Lightweight Design: Ergonomically designed with a top-grade aluminum alloy body, weighing only 45 grams and measuring 115x15x15 mm, similar to a traditional manual screwdriver.
- LED Indicator & Illumination: Equipped with built-in LED indicator lights for drill direction and four shadowless LED lights at the tip to illuminate the work area.
- Magnetic Bit Tray: The storage case includes a magnetic tray to re-magnetize bits if their magnetic strength weakens.
5. Setup
-
Charge the Screwdriver:
Before first use, fully charge the SES Mini. Connect the included Type-C charging cable to the charging port on the screwdriver and to a suitable USB power source. The work status indicator light will show charging status. A full charge takes approximately 50 minutes.
-
Identify Screwdriver Components:
Figure 6: Screwdriver structure diagram. - Type-C Charging Port: For charging the device.
- Work Status Indicator Light: Displays charging status and operational direction.
- Reversed Switch (L): Activates counter-clockwise rotation for loosening screws.
- Forward Switch (R): Activates clockwise rotation for tightening screws.
- Aluminum Alloy Body: The main housing of the screwdriver.
- LED Lamp: Illuminates the work area.
- Installation Opening of the Header: Where the screwdriver bits are inserted.
-
Insert a Bit:
Select the appropriate S2 steel bit for your task from the 28-piece set. Gently push the bit into the installation opening of the header until it is securely seated. The magnetic tip will hold the bit in place.
6. Operating Instructions
-
Power On/Off:
The screwdriver does not have a dedicated power button. It activates when a directional switch (L or R) is pressed and deactivates when released.
-
Selecting Rotation Direction:
- Press the 'R' (Forward) switch for clockwise rotation to tighten screws.
- Press the 'L' (Reversed) switch for counter-clockwise rotation to loosen screws.
Figure 7: LED indicator showing drill direction. -
Using the LED Lamp:
The four shadowless LED lights at the tip will automatically illuminate when the screwdriver is in operation, providing clear visibility of your work area.
-
Manual Mode:
For screws that are extremely tight or require precise final tightening, the screwdriver can also be used in manual mode. The integrated clutch provides torque protection even when used manually.
-
Application:
This tool is ideal for precision work on small and delicate devices such as mobile phones, computers, watches, glasses, RC cars, and headphones.
7. Maintenance
- Cleaning: Wipe the screwdriver body and bits with a soft, dry cloth after each use to remove dust and debris. Do not use abrasive cleaners or solvents.
- Bit Care: Ensure bits are clean and free from rust. Store them in the aluminum alloy case to prevent loss and damage.
- Re-magnetizing Bits: If the magnetic strength of a bit weakens, reposition its tip onto the magnetic tray within the storage case to re-magnetize it.
Figure 8: Re-magnetizing a screwdriver bit. - Storage: Store the screwdriver and its bits in the provided aluminum alloy case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. Charge the device regularly, even if not in use, to maintain battery health.
8. Troubleshooting
- Screwdriver not turning on: Ensure the battery is charged. Connect the Type-C cable and charge for at least 15 minutes before attempting to use.
- Bit slipping or not gripping screw: Verify that you are using the correct bit type and size for the screw. Check if the bit is fully inserted into the screwdriver. If the bit's magnetism is weak, use the re-magnetization feature in the storage case.
- Screwdriver stops during operation: This may indicate the overload protection has activated due to excessive resistance. Release the switch, reposition the bit, and try again with less force or switch to manual mode if necessary.
- LED lamp not working: Ensure the screwdriver is powered on (by pressing a directional switch). If the issue persists, contact support.
9. User Tips
- Always select the correct bit for the screw head to prevent stripping the screw or damaging the bit.
- For very tight screws, initially loosen them manually before switching to electric mode for faster removal.
- When tightening, use the electric mode for speed, then finish with a gentle manual turn if precise torque is required, leveraging the screwdriver's manual mode torque protection.
- Keep the bit set organized in its case to easily find the right bit and prevent loss.
- Regularly check the charge level, especially before starting a long task, to avoid interruptions.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official ARROWMAX website. Keep your proof of purchase for warranty claims.