CARABC Wireless Carplay Android Auto Module User Manual

1. Introduction

Thank you for choosing the CARABC Wireless Carplay Android Auto Module. This module is designed to seamlessly integrate advanced smartphone connectivity features like Wireless CarPlay, Android Auto, Airplay, and Autolink Mirroring into your vehicle's existing MIB/MIB2 system. Enjoy enhanced navigation, communication, and entertainment while maintaining original car controls.

2. Compatibility

This module is compatible with various VW, Skoda, and Seat models equipped with MIB/MIB2 systems and specific display screen sizes. Please verify your car model and system configuration before installation.

2.1 Supported Car Models

For VW:

• Golf 7 (2013-2019)
• Golf Sportsvan (2014-2019)
• GTI (2014-2019)
• Passat B8 (2014-2019)
• Tiguan (2014-2021)
• B8 Variant (2014-2019)
• Teramont (2014-2019)
• New Polo (2016-2019)
• T-Cross (2016-2019)
• Jetta (2016-2019)
• T-ROC (2016-2019)
• MOIA (2016-2019)
• Cross Blue (2016-2019)

For Skoda:

• SUPERB-B (2014-2019)
• Octavia (2014-2019)
• KODIAQ (2014-2019)
• KOROC (2014-2019)
• KAMIQ (2014-2019)

For Seat:

• Arona (2016-2019)
• New Leon (2016-2019)
• NEW IBIZA (2016-2019)
• Toledo Ateca (2016-2019)

Note: Compatibility is also dependent on the display screen size (5.8/6.5/8/9.2 inch) and the presence of a CD player in the glove box for some models.

3. Package Contents

Upon opening your CARABC module package, you should find the following items:

• CARABC Wireless Carplay Android Auto Module Box
• Power Harness
• USB Cable
• Antenna
• Video Input Cable
• Auxiliary Cable
• Installation Tools (e.g., trim removal tools)
• User Manual (this document)

4. Installation Guide

The CARABC module is designed for non-destructive installation, meaning no wire cutting is typically required. However, professional installation is recommended due to the complexity of accessing the car's head unit and wiring.

4.1 Before You Begin

1. Ensure your vehicle is turned off and the ignition key is removed.
2. Disconnect the car battery's negative terminal to prevent electrical shorts.
3. Gather all necessary tools, including the provided installation tools.

4.2 General Installation Steps

The exact steps may vary slightly depending on your specific car model. Refer to a vehicle-specific disassembly guide if available.

1. Access the Head Unit: Carefully remove the trim panels around your car's infotainment screen and head unit to gain access to the rear connections. Use the provided trim removal tools to avoid damaging interior surfaces.
2. Locate MIB/MIB2 Connections: Identify the main power and display cables connected to your car's head unit.
3. Connect the Module:

   

   • Connect the module's power harness in-line with the car's original head unit power cable. This typically involves disconnecting the original cable from the head unit and connecting it to one end of the module's harness, then connecting the other end of the module's harness to the head unit.
   • Connect the provided USB cable to the module. This port can be used for wired CarPlay/Android Auto or for firmware updates.
   • Attach the WiFi/Bluetooth antenna to the module.
   • If installing an aftermarket reverse camera, connect its video output to the module's video input port (CVBS/AHD720P format supported).
   • Connect the auxiliary cable if your car requires it for audio output.
4. Secure the Module: Find a suitable, secure location behind the dashboard or in the glove box to place the CARABC module. Ensure it does not interfere with any moving parts or existing wiring.
5. Reassemble: Carefully reassemble the trim panels and head unit.
6. Reconnect Battery: Reconnect the car battery's negative terminal.

4.3 Initial Power-Up and Configuration

1. Turn on your vehicle's ignition.
2. The car's display should now show the CARABC module's interface or allow switching to it.
3. Follow any on-screen prompts for initial setup or pairing your smartphone.

5. Operating Instructions

The CARABC module allows you to control your smartphone's features directly from your car's display using various input methods.

5.1 Switching to CarPlay/Android Auto Interface

Use your factory controls to switch between the original car system and the CarPlay/Android Auto display at any time. This is typically done by pressing and holding a specific button on your head unit or steering wheel (e.g., 'MEDIA' or 'NAV').

5.2 Connecting Your Smartphone

For Wireless CarPlay/Android Auto:

1. On your car's display, navigate to the CARABC module interface.
2. Enable Bluetooth and Wi-Fi on your smartphone.
3. On the module's interface, select 'CarPlay' or 'Android Auto' and follow the on-screen instructions to pair your phone via Bluetooth.
4. Once paired via Bluetooth, the system will automatically establish a Wi-Fi connection for wireless CarPlay/Android Auto functionality.

For Wired CarPlay/Android Auto:

1. Connect your smartphone to the module's USB port using a high-quality USB cable.
2. The system should automatically detect your phone and launch CarPlay or Android Auto.

5.3 Using CarPlay and Android Auto

Once connected, you can access various apps and features:

• Navigation: Use GPS navigation applications like Google Maps, Waze, and Apple Maps with real-time traffic information.
• Communication: Make calls, send messages, and access your contacts.
• Entertainment: Play music, podcasts, and audiobooks from your favorite apps.
• Voice Control: Activate voice assistants (e.g., 'Hey Siri...' for CarPlay) to control functions hands-free.

5.4 Airplay/Autolink Mirroring

The module supports iPhone Airplay and Android Autolink for screen mirroring. This allows you to display your phone's screen directly onto the car's infotainment display.

1. Ensure your phone is connected to the module via Wi-Fi.
2. Select the 'Airplay' or 'Autolink' option on the module's interface.
3. Follow the on-screen instructions to initiate screen mirroring from your smartphone.

5.5 Camera and Parking Sensor Support

The module supports your car's original reverse camera and parking sensors. If you have installed an aftermarket reverse camera (CVBS/AHD720P format), the module will automatically switch to the camera view when the vehicle is put into reverse gear.

5.6 Controls

You can control the CarPlay/Android Auto interface using:

• Original Vehicle Key Operation: Use the existing buttons and knobs on your car's console.
• Original Car Steering Wheel Operation: Utilize your steering wheel controls for volume, track skipping, and voice assistant activation.
• Touch Controls: If your car's display is a touchscreen, you can interact directly with the interface.
• Voice Control: Use voice commands (e.g., 'Hey Siri...') for hands-free operation.

6. Maintenance

To ensure the longevity and optimal performance of your CARABC module:

• Keep the module and its connections dry and free from moisture.
• Avoid exposing the module to extreme temperatures.
• Do not attempt to open or modify the module, as this will void the warranty.
• Periodically check for firmware updates from the manufacturer to ensure the best compatibility and features.

7. Troubleshooting

If you encounter issues with your CARABC module, try the following troubleshooting steps:

7.1 No Display/Black Screen

• Ensure all cables are securely connected to the module and the car's head unit.
• Verify that the car battery was reconnected properly after installation.
• Try switching between the original car system and the module's interface using your car's factory controls.

7.2 No Audio

• Check the car's audio input source. Ensure it is set to the correct AUX input if required by your vehicle.
• Verify that the auxiliary cable (if used) is properly connected.
• Adjust the volume on both your smartphone and the car's audio system.

7.3 Wireless Connection Issues (CarPlay/Android Auto)

• Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
• Forget the device from your phone's Bluetooth settings and try pairing again.
• Restart both your smartphone and the car's infotainment system.
• Check for any obstructions that might interfere with the Wi-Fi signal.

7.4 Controls Not Responding

• Ensure your phone is properly connected and CarPlay/Android Auto is active.
• If using steering wheel controls, ensure they are correctly mapped or recognized by the module.
• Restart the car's infotainment system.

7.5 Aftermarket Camera Not Displaying

• Verify that the camera is powered correctly and functioning independently.
• Ensure the camera's video output format (CVBS/AHD720P) is compatible with the module.
• Check the video input cable connection to the module.

8. Specifications

9. User Tips

• For the best wireless performance, ensure your phone's Wi-Fi is set to 5GHz if your phone supports it, as the module supports both 2.4G and 5.8G Wi-Fi.
• Always use high-quality USB cables for wired connections to prevent connectivity issues.
• If experiencing lag or disconnections, try restarting your phone and the car's infotainment system.
• Keep your phone's operating system and apps updated to ensure compatibility with CarPlay/Android Auto.

10. Warranty and Support

CARABC provides customer support for its products. For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact CARABC Official Store customer service. Please have your product model and purchase details ready when contacting support.

Contact Information:

• WhatsApp: +86 13794490723 (GMT+8 Service Time)