1. Product Overview
This universal USB programming cable is designed to establish a reliable connection between your ham radio (intercom) and a computer. It facilitates data transmission for various functions, including frequency programming, channel setting, function configuration, and data backup/restoration. Featuring a durable cable body and a stable transmission chip, it ensures compatibility with most mainstream intercom models, specifically BAJETON BJ-9000, Radtel RT-950, and Radtel RT-950 PRO.

The cable is approximately 104 cm (40.94 inches) long, providing ample connectivity. Its robust construction is designed to be more durable and resistant to bending, ensuring a long service life.

2. Setup and Connection
2.1 Preparation
- Power Off Intercom: Ensure your intercom (ham radio) is powered off before connecting the cable.
- Check Port Type: Verify the programming port type on your intercom (e.g., USB, 2.5mm, 3.5mm, 6-pin) and confirm it matches the cable's interface. This cable features a 3-pin interface.
- Install Software: Install the corresponding programming software on your computer. This software is typically provided by the intercom manufacturer or a compatible universal software (e.g., CHIRP). If you do not have the frequency writing software for your walkie-talkie model, please contact the seller for assistance.
2.2 Connection
- Insert the USB end of the programming cable into an available USB port on your computer.
- Allow your computer to automatically install the necessary drivers. If automatic installation fails, you may need to manually install the driver.
- Connect the 3-pin end of the cable to the intercom's programming port. Ensure it is inserted firmly until it is fixed without looseness.

3. Operating Instructions
3.1 Programming Operation
- Power On Intercom: Turn on your intercom after the cable is securely connected.
- Launch Software: Open the installed programming software on your computer.
- Select Device: Within the software, select the correct intercom model and the communication port (COM port) that the cable is using. You may need to check your computer's device manager to identify the correct COM port.
- Perform Programming: Follow the software prompts to perform frequency setting, channel editing, function configuration, or data backup/restoration.
- Maintain Connection: Do not disconnect the cable during data transmission to avoid programming failure or potential damage to the intercom.
3.2 Disconnection & Completion
- Save Configuration: After completing all programming tasks, save the configuration within the software first.
- Power Off Intercom: Turn off the intercom.
- Disconnect Cable: Gently pull the programming cable from both the computer and intercom interfaces to disconnect. Avoid pulling the cable body directly to prevent wire breakage or interface damage.
4. Maintenance & Care
- Cleaning: Regularly clean the cable interfaces and surface with a dry, soft cloth. For stubborn dirt or oxidation on interfaces, gently wipe with a cotton swab dipped in anhydrous alcohol, and ensure it is completely dry before reuse.
- Inspection: Periodically check the cable body for cracks, wear, or exposed wires. Inspect the connectors for looseness or deformation. Replace the cable immediately if any abnormality is found.
- Storage: When not in use, coil the cable neatly (avoid tight winding) and store it in a dry, well-ventilated, dust-free environment. Do not place heavy objects on the cable to prevent pressure damage.
- Usage Frequency: Avoid plugging and unplugging the cable frequently when not necessary, as this can reduce interface wear and extend service life.
5. Troubleshooting
- Cable Not Recognized: If the cable is not recognized by your computer, ensure the drivers are correctly installed. Check the COM port settings in your computer's device manager. Re-insert the cable into both the walkie-talkie and computer.
- Connection Issues (Radtel RT-950 Pro): Some users have reported that the screw on the radio side connector for the Radtel RT-950 Pro might be too long, preventing a tight connection. If you experience intermittent connection or a gap with the spring-loaded contacts, try adding 1-3 small washers under the thumbscrew on the radio connector side to ensure a secure fit and proper contact.
- Programming Errors: If you encounter programming errors (e.g., '60% upload error'), ensure your programming software is up-to-date and compatible with your radio's firmware. Verify the correct COM port is selected. If issues persist, consult the radio manufacturer's support or the software's documentation.
- Abnormal Cable Behavior: If the cable shows signs of abnormality such as heating, discoloration, peculiar smell, or unstable data transmission, immediately stop using it and disconnect it from all equipment. Contact an authorized service center for inspection.
6. Specifications
| Feature | Specification |
|---|---|
| Item Type | USB Programming Cable |
| Brand | BAJETON |
| Compatibility | BAJETON BJ-9000, Radtel RT-950, Radtel RT-950 PRO |
| Interface | USB to 3-pin connector |
| Cable Length | Approx. 104 cm (40.94 inches) |
| Wireless Function | No |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Rated Voltage | 5V DC |
| Origin | Mainland China |
| Package Dimensions (approx.) | 19 cm (L) x 14 cm (W) x 1 cm (H) |
| Package Weight (approx.) | 0.039 kg |
7. Safety Information
To ensure safe use of the product, protect personal safety, and avoid equipment damage, please read and adhere to the following precautions carefully:
- Environmental Conditions: Do not use the programming cable in explosive, flammable, or high-dust environments.
- Temperature Limits: Do not use or store the cable in environments exceeding the operating temperature range of -10°C to 50°C or the storage temperature range of -20°C to 60°C.
- Moisture Exposure: The cable is not waterproof. Do not immerse it in water, expose it to heavy rain, or use it in high-humidity environments to avoid short circuits and chip damage.
- Voltage Compatibility: Do not use the cable with intercoms or computers that exceed its rated voltage (5V DC) to prevent burning the internal chip of the cable or the equipment interface.
- Unauthorized Modifications: Unauthorized disassembly, modification, or repair of the programming cable is prohibited. Such operations will damage the product, void any warranty, and may cause equipment failure.
- Cable Handling: Avoid excessive bending, twisting, or stepping on the cable. The minimum bending radius of the cable body shall not be less than 5cm to prevent internal wire breakage.
- Data Transmission: Do not use the programming cable for data transmission beyond its specified rate to avoid data loss or transmission errors.
- Wet Hands: Do not touch the cable interfaces with wet hands. Disconnect the cable before cleaning to avoid electric shock or short circuit.
- Heat & Magnetic Fields: Keep the programming cable away from high-temperature sources (heaters, stoves, high-temperature pipelines) and strong magnetic fields to prevent cable aging and signal interference.
- Abnormalities: If the cable shows signs of abnormality (heating, discoloration, peculiar smell, or unstable transmission), stop using it immediately and disconnect it from all equipment.
- Children: Keep the cable out of the reach of children to prevent accidental swallowing of small parts (connectors) or electric shock.
- System Upgrades: Do not use the programming cable during computer or intercom system upgrades to avoid software conflicts and equipment malfunctions.
- Software Source: Ensure the programming software is from official or trusted sources to avoid virus infection and equipment damage during data transmission.
8. User Tips
- Secure Connection for Radtel RT-950 Pro: For Radtel RT-950 Pro radios, if the cable doesn't feel secure or if contacts seem loose, consider adding 1-3 small washers under the thumbscrew on the radio connector side. This can help shorten the screw's effective length and ensure a tighter, more reliable connection.
- Driver Installation: If your computer doesn't recognize the cable, ensure you have installed the correct drivers. Sometimes, generic drivers (like CH340) might be needed, or specific drivers provided by the radio manufacturer. Always check your computer's Device Manager for the correct COM port.
- Software Availability: If you lack the necessary programming software for your specific radio model, contact the seller or the radio manufacturer. They can often provide the correct software or direct you to a reliable source.
- Firmware Updates: This cable can be used for firmware updates on compatible radios. Always follow the radio manufacturer's instructions carefully when performing firmware updates.
9. Frequently Asked Questions (FAQ)
- Q: My computer doesn't recognize the cable. What should I do?
- A: First, ensure the cable is properly connected to both the computer and the radio. Then, check if the necessary drivers are installed. You might need to manually install drivers (e.g., CH340 drivers) if they don't install automatically. Verify the assigned COM port in your computer's Device Manager.
- Q: What programming software should I use?
- A: You should use the programming software provided by your radio's manufacturer (e.g., for BAJETON BJ-9000 or Radtel RT-950/RT-950 PRO). Universal software like CHIRP may also be compatible. If you don't have the software, please contact the seller for assistance.
- Q: Is this cable compatible with Windows 11?
- A: The cable generally works with Windows 11, but you may need to ensure the correct drivers are installed. If you encounter issues, try updating your USB drivers or installing specific drivers for the cable's chip (if known).
- Q: Can I use this cable with other radio models not listed?
- A: This cable is specifically designed and tested for BAJETON BJ-9000, Radtel RT-950, and Radtel RT-950 PRO. While it might physically fit other radios with a similar 3-pin interface, compatibility with programming software and proper functionality cannot be guaranteed for unlisted models.
10. Warranty and Support
This product complies with relevant international regulations and harmonized standards, including Radio Equipment Directive (RED) 2014/53/EU and Low Voltage Directive (LVD) 2014/35/EU. For detailed information on applicable harmonized standards, please refer to the official documentation.
If you require programming software for your specific radio model, please contact the seller for assistance. For any abnormalities with the cable that require inspection or repair, contact an authorized service center.
For additional guides and documents, including a user manual in PDF format, please refer to the following resource: Item guides & documents (PDF).