1. Product Overview
The Gamwing AB02S is a versatile wireless game controller designed for an enhanced gaming experience on Nintendo Switch and iOS native games. It features advanced technologies such as Hall Effect joysticks and triggers, a 6-axis gyro sensor, dual vibration motors, and programmable buttons.
2. Setup and Connection
2.1 Power On/Off
- To turn on/off the controller, hold down the H button for 2 seconds. The indicator lights will turn on/off.
- Note: If the indicator lights flash red, please charge the controller immediately. The indicators will light red during charging.
- Turning on is for re-connection only if already paired.
2.2 Connection Method
2.2.1 For Nintendo Switch:
- Hold down the H + B combination buttons for 2 seconds until the indicators flash white.
- Go to your Switch console's Controllers menu: Change Grip/Order to pair and connect.
- The controller will vibrate once, and its indicators will remain solid white after connection. Press the A button on the controller to confirm the connection.
2.2.2 For iOS Devices:
- Hold down the H + A combination buttons for 2 seconds until the indicators flash blue.
- Go to your iOS device's Bluetooth settings and select the controller (usually appears as 'DUALSHOCK 4 Wireless Controller') to pair.
- The controller will vibrate once, and its indicators will remain solid blue after connection.
3. Operating Instructions
3.1 Button Layout
Refer to Figure 2 for a detailed diagram of the controller's button layout, including:
- Left Joystick (LS) & Right Joystick (RS)
- D-Pad
- A/B/X/Y Action buttons
- Capture Button
- M Button
- H Button
- RB/LB Buttons (Shoulder buttons)
- RT/LT Buttons (Triggers)
- R4/L4 Buttons (Programmable Back buttons)
- Indicator lights
- Charging/Cable Connection Port
3.2 Button Combinations and Functions
| Buttons | Function |
|---|---|
| Hold down H + ⊕ buttons for 2s | Un-bonding the Bluetooth. |
| Hold down M + D-pad's up buttons for 2s | Interchange the left joystick and D-pad. The setup will still be saved after restart. |
| Hold down M + H buttons for 2s | Restore factory settings. |
| Hold down ○ + B buttons for 2s | Interchange A-B, X-Y. The setup will still be saved after restart. |
| Hold down RS UP/Down buttons | Adjust the vibration level. |
| Hold down the H + LT/RT buttons for 2s | Enable/Disable Hair Trigger mode. When hair trigger mode is on, the indicators flash 3 times when the LT/RT button is pressed. The setup will still be saved after restart. |
| M + Functional Button (A/B/X/Y/LB/RB/LT/RT) | Set/Clear Turbo/Auto function: Click M + A/B/X/Y/LB/RB/LT/RT button to set Turbo/Auto and Clear. (Click the first time: turn on Turbo, click the second time: turn on Auto, click the third time: clear auto.) Double click the M button to clear all turbo/auto functions for all buttons. |
| Hold down H + D-pad's left/right + Turbo/Auto for 2s | Adjust the Turbo/Auto speed. Left: speeding up / Right: slowing down. It can also be judged according to the flashing speed of the indicator light. |
| LS + Functional Button (A/B/X/Y/LB/RB/LT/RT) | Enable/Disable Gyro Function. After Gyro function is on, the indicators flash 3 times. The setup will still be saved after restart. |
3.3 Programmable Back Buttons (L4/R4)
3.3.1 Set L4/R4 Value:
- Hold down the M + L4/R4 buttons combination until the indicators blink slowly.
- Press the button you want to map to L4/R4.
- Press the M button to finish the setting. The indicators return to the initial state. The L4/R4 buttons value is now set.
3.3.2 Cancel L4/R4 Value:
- Hold down the M + L4/R4 combination buttons until the indicators blink slowly.
- Release the M button and double click the button L4/R4.
- The indicators return to the initial state. The L4/R4 button value is canceled.
Note: After 30 seconds of inactivity when setting, the controller will automatically exit the setting mode and the button value will remain the same.
3.4 Hall Effect Joysticks and Triggers
The controller features Hall Effect joysticks for ultra-precise control, eliminating drift and dead zones. The Hall Effect triggers offer two modes:
- Analog Mode: Provides proportional input, ideal for nuanced control in racing games.
- Hair Trigger Mode: Reduces trigger travel for faster response times, perfect for competitive FPS and action games.
3.5 Dual Vibration Motors
The controller is equipped with dual vibration motors with 5 adjustable levels (OFF, 20%, 40%, 60%, 80%, 100%). Adjust the vibration intensity using the RS UP/Down buttons (refer to Table 1).
3.6 6-Axis Gyro Sensor
The integrated 6-axis gyro sensor provides precise motion control for compatible games. You can enable or disable this function using the LS + Functional Button combination (refer to Table 1).
3.7 Turbo Function
The Turbo function allows for rapid-fire input. You can set and clear Turbo/Auto functions for individual buttons and adjust the speed (5/S, 12/S, 20/S) using the button combinations listed in Table 1.
3.8 Wake-Up Function
The controller supports a one-click wake-up function for your Nintendo Switch console. Simply press the H button to wake up the console and reconnect the controller.
4. Calibration
4.1 Calibration of Joysticks and Triggers
- Power on the controller or connect it to your console. Hold down the (-) + (+) + H combination buttons for 2 seconds until the indicator lights blink white rapidly to enter calibration mode.
- Ensure the triggers and the joysticks are in their natural position without any contact.
- Rotate the joysticks at their maximum travel 3 times and let them return to their initial position naturally.
- Press the triggers to their maximum travel 3 times and let them return to their initial position naturally.
- Press the B button to complete and exit the calibration mode.
Note:
- Calibration should be kept at a constant speed and gently operated to avoid errors in the collected data.
- If the joysticks and triggers can be used normally, please do not calibrate.
- You cannot press the B button to exit calibration mode until the joystick has been correctly calibrated.
4.2 6-Axis Gyro Motion Control Calibration
- Hold down H + ⊕ for 2 seconds to enter the 6-axis gyro motion control calibration mode. The indicators flash in white quickly.
- Place the AB02S controller horizontally, then press the H button to complete the calibration.
- The indicator lights will restore to their previous state.
5. Maintenance
5.1 Charging the Controller
The controller is equipped with a 450mAh battery, providing approximately 9 hours of play time. When the indicator lights flash red, it signifies a low battery and the controller needs to be charged. Connect the controller to a power source using a compatible USB cable via the Charging/Cable Connection Port. The indicator lights will be red during charging.
5.2 General Care
- Keep the controller dry and away from moisture.
- Avoid exposing the controller to extreme temperatures.
- Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the controller in a safe place to prevent physical damage.
6. Troubleshooting
- Controller not connecting: Ensure the correct connection method (H+B for Switch, H+A for iOS) is used. Make sure the console/device's Bluetooth is enabled. Try un-bonding the controller (H + ⊕ for 2s) and re-pairing.
- Joystick/Trigger drift or inaccuracy: Perform the Joystick and Triggers Calibration as described in Section 4.1.
- Motion control issues: Perform the 6-Axis Gyro Motion Control Calibration as described in Section 4.2. Ensure the Gyro function is enabled (LS + Functional Button, refer to Table 1).
- Controller not turning on: The battery might be depleted. Connect the controller to a charger. If indicator lights flash red, it needs charging.
- Vibration not working or too weak/strong: Adjust the vibration level using the RS UP/Down buttons (refer to Table 1).
- Programmable buttons not working: Ensure the L4/R4 buttons are correctly mapped as per Section 3.3. If settings are lost, try re-setting them.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Wireless Controller for Switch |
| Model Number | AB02S |
| Brand Name | Gamwing (TruTra) |
| Support Platforms | Nintendo Switch, iOS Native Games |
| Connection Type | Wireless 5.3 (Bluetooth) |
| Joystick Sensor Module | Hall Effect |
| Trigger Button Type | Hall-Linear (Double Mode: Analog/Hair Trigger) |
| Vibration | Dual Vibration Motors (5 adjustable levels) |
| Motion Control | 6-Axis Gyro Sensor |
| Battery Capacity | 450mAh |
| Battery Life | Approx. 9 hours |
| Special Features | Wake-up Function, Turbo Function, Programmable Back Keys (L4/R4), Ergonomic & Non-Slip Grip |
| D-pad Switch Type | Membrane |
| ABXY Switch Type | Membrane |
| Bumpers Switch Type | Membrane |
| Package Dimensions (L x W x H) | 28 cm x 18 cm x 9 cm |
| Package Weight | 0.45 kg |
| Certification | CE, FCC, RoHS |
8. User Tips
- Charging while playing: The controller can be charged while in use. Connect it to a power source via the USB-C port. Note that the controller does not support pass-through charging for the connected tablet/device.
- Optimizing battery life: To maximize battery life, consider reducing the vibration intensity or turning it off when not needed.
- Customizing controls: Experiment with the programmable back buttons (L4/R4) and Turbo functions to create custom setups that enhance your gameplay for different genres.
- Regular calibration: If you notice any input inaccuracies, performing joystick and gyro calibration can often resolve the issue and maintain optimal performance.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.