1. Introduction
The Flipsky FT85BS is a high-performance Electronic Speed Controller (ESC) designed for a wide range of electric vehicles and robotics applications. It features a robust design, programmable settings, and support for various input signals and motor control modes, ensuring efficient and reliable operation.

2. Specifications
| Feature | Description |
|---|---|
| Firmware | V1.4 or above (update via Flipsky ESC Tool supported) |
| Voltage | 14-84V (safe for 4-20S battery configurations) |
| Continuous Current | 50V/60A; 75V/50A; 84V/40A (dependent on mounting, ambient temperature, and cooling) |
| Peak Current | 250A |
| Communication Ports | USB, CAN, UART, PPM, ADC |
| Input Signals Support | PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present), PAS |
| Startup Modes Support | IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 encoder SPI interface) |
| BEC | 5V@1A |
| Multiple Speed Gear Levels | Low, Medium, High, Reverse |
| Motor/Power Wire Size | 12 AWG |
| Programmable | Yes |
| Regenerative Capacity | Yes |
| Dimensions | L110.5mm x W55mm x H30mm (Including Aluminum Case) |
| Power Switch Button | Red |
| Material | Metal (Aluminum-based PCB for heat dissipation) |

3. Features
- Adopts AT32F403ARCT7 CPU with ARM Cortex-M4 structure, offering 240MHz clock speed and max PWM switching frequency of 45KHz for improved motor RPM.
- Programmable via Flipsky ESC Tool for compatibility with various motor types, battery voltages, and control methods.
- Programmable via Flipsky VX4 remote (Firmware Version: VX4_V1.2 or above).
- Supports FOC (Field-Oriented Control) for low working noise and smooth starting.
- Provides real-time data and fault alerts.
- Supports adaptive variable PWM frequency control.
- Supports sensor mode (HALL) and sensorless modes (IPDS, HFPI).
- Supports control types: Current, Duty Cycle, Speed control, Position Control.
- Comprehensive protection functions: low and high voltage, over-current, abnormal temperature, MOSFET over-temperature and over-current, battery over-discharge, and motor over-temperature.
- Supports multiple motor temperature sensor types (NTC-10K-25℃, NTC-10K-100℃, PT1000, PTC-1K-100℃, KTY, etc.).
- Utilizes an aluminum-based PCB for excellent heat dissipation.
4. Setup and Installation
Proper wiring is crucial for the safe and effective operation of your FT85BS ESC. Ensure all connections are secure and correctly aligned before applying power.
4.1 General Wiring Overview
The FT85BS ESC features various ports for communication and control. The main power wires (12 AWG) connect to your battery, and the motor wires (12 AWG) connect to your motor. Additional ports are available for USB, CAN, UART, PPM, ADC, and Hall sensors.

4.2 Detailed Connection Diagrams
The following diagrams illustrate how to connect various peripherals such as throttle, brake, and speed level switches to the FT85BS ESC.



5. Operation
The FT85BS ESC is highly programmable, allowing customization to suit your specific application and preferences.
5.1 Programming via Flipsky ESC Tool
The ESC can be configured using the Flipsky ESC Tool software on a computer. Connect the ESC to your computer via the USB port. The software allows you to set motor parameters, basic ESC settings, and perform firmware updates.

5.2 Programming via Flipsky VX4 Remote
For on-the-go adjustments and motor identification, the FT85BS ESC can also be programmed via a compatible Flipsky VX4 remote (Firmware Version: VX4_V1.2 or above). This allows for convenient parameter adjustments without needing a computer.

5.3 Speed Gear Levels
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These can typically be controlled via an external switch connected to the appropriate input signal port, as shown in the wiring diagrams.
5.4 Product Video
For a visual guide on the product features and basic operation, please refer to the official product video:
6. Maintenance
- Keep the ESC clean and free from dust, dirt, and moisture.
- Regularly inspect all wiring connections for signs of wear, corrosion, or looseness.
- Ensure adequate airflow around the ESC for optimal heat dissipation, especially during high-current operation.
- Avoid exposing the ESC to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to open the ESC casing unless you are a qualified technician, as this may void the warranty and risk damage.
7. Troubleshooting
- No Power: Check battery connections, ensure the battery is charged, and verify the power switch is in the ON position.
- Motor Not Responding: Verify motor phase wire connections, check Hall sensor connections (if used), and ensure the ESC is correctly programmed for your motor type.
- Intermittent Operation: Inspect all signal and power connections for looseness. Check for any signs of damage to wires or connectors.
- Overheating: Ensure the ESC has sufficient cooling. Reduce continuous current if operating in high-temperature environments. Verify motor parameters are correctly set in the ESC Tool.
- Programming Issues: Ensure the correct COM port is selected in the Flipsky ESC Tool. Verify the USB cable is functioning correctly. For VX4 remote programming, ensure the remote's firmware is up to date.
8. User Tips
- Always perform a motor detection and calibration using the Flipsky ESC Tool after initial setup or changing motors to ensure optimal performance and prevent damage.
- When updating firmware, ensure a stable power supply to both the ESC and your computer to prevent interruptions.
- For applications requiring high continuous current, consider additional cooling solutions for the ESC to maintain performance and longevity.
9. Application Fields
The Flipsky FT85BS ESC is versatile and suitable for a variety of applications, including:
- Electric skateboards
- E-bikes
- E-scooters
- Electric motorcycles
- Robotics
- FPV (First Person View) systems
- RC Toys
- Boats and Kayaks

10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Flipsky FT85BS ESC, please contact the manufacturer or your point of purchase. Ensure you retain your proof of purchase for warranty claims.