1. Introduction
Thank you for choosing the Beitian BK-252Q GPS GNSS Module. This manual provides essential information for the safe and effective use of your module. Please read it carefully before installation and operation, and keep it for future reference.
The Beitian BK-252Q is a high-performance GNSS module featuring the M9140 chip and an integrated QMC5883 electronic compass. It supports multiple satellite systems including GPS, GLONASS, BDS, and GALILEO, making it ideal for applications in drones, vehicles, and various DIY projects requiring precise positioning and heading information.

2. Safety & Warnings
WARNING: To reduce the risk of injury, fire, electric shock, or property damage, please read and follow all safety information and instructions before using this product.
- This product is intended for users aged 14 years and above.
- Not suitable for children under 3 years. Small parts may present a choking hazard.
- Keep away from fire, high temperature, water, moisture, and corrosive environments.
- Do not disassemble, modify, or repair the product without authorization. Unauthorized modifications may void the warranty and compromise safety.
- Use the product only for its intended purpose. Misuse may cause injury or damage.
- If the product (especially electronic parts) is damaged, overheated, emits smoke, unusual odor, or noise, stop using it immediately and disconnect power. Contact customer support for assistance.
- Keep packaging materials (plastic bags, foam, etc.) away from children to avoid suffocation risk.
- This module is designed for integration into larger systems. Ensure proper insulation and protection from environmental elements.
3. Technical Specifications
| Feature | Detail |
|---|---|
| Model | BK-252Q |
| Chip | M9140 |
| Working Mode | GPS, GLONASS, BDS, GALILEO |
| Channels | 92 Search Channels |
| Horizontal Accuracy | 1.5m CEP |
| Baud Rate (bps) | Default 115200bps |
| Update Rate | 1Hz |
| Voltage | 5.0V |
| Current | 25mA/5.0V |
| Size | 25×25×7.7mm |
| Weight | 13.5g |
| Connector | 1.00mm Pitch 6pin Header |
| Compass | Internal Electronic Compass QMC5883 |
| Material | Metal |
| Recommended Age | 14+y |
4. Setup & Wiring
4.1 Preparation
- Carefully remove the module and its accessories from the packaging.
- Inspect the module for any visible damage.
- Ensure you have a compatible 5V power supply and a microcontroller or system for communication.
4.2 Wiring
The BK-252Q module uses a 1.00mm pitch 6-pin header for connections. The pins are typically labeled on the module itself. Refer to the image below for pin identification:

Typical pin assignments are:
- VCC: Power supply input (5.0V)
- GND: Ground
- TX: Transmit data (UART output from module)
- RX: Receive data (UART input to module)
- SCL: I2C Clock (for QMC5883 compass)
- SDA: I2C Data (for QMC5883 compass)
- PPS: Pulse Per Second output (for precise timing)
Connect the module to your system as follows:
- Connect VCC to your 5V power supply.
- Connect GND to the system ground.
- Connect TX to your microcontroller's RX pin (for receiving GPS data).
- Connect RX to your microcontroller's TX pin (for sending commands to the GPS module, if needed).
- For compass functionality, connect SCL and SDA to your microcontroller's I2C pins.
- The PPS pin can be connected to an interrupt-capable pin on your microcontroller for precise time synchronization.

5. Operation
5.1 Power On
Once correctly wired, apply 5V power to the VCC pin. The module will power on automatically. There is no physical power button on the module.
5.2 GNSS Data Acquisition
The module will begin searching for satellite signals upon power-up. For optimal performance, ensure the module has a clear view of the sky. GNSS data (NMEA sentences) will be output via the TX pin at the default baud rate of 115200bps.
- Use a serial terminal or microcontroller to read data from the TX pin.
- The module typically outputs data at 1Hz update rate.
- The first fix (initial position lock) may take a few minutes, especially after a long period of inactivity or a significant change in location (cold start).
5.3 Compass (QMC5883) Operation
The integrated QMC5883 electronic compass can be accessed via the I2C interface (SCL, SDA pins). You will need to implement I2C communication in your microcontroller code to read heading data from the compass sensor.
- Ensure your I2C library is compatible with the QMC5883.
- Compass calibration may be required for accurate readings, especially after installation or if magnetic interference is present.
6. Maintenance & Storage
6.1 Cleaning
- Before cleaning, ensure the module is powered off and disconnected from all power sources.
- Use a soft, lint-free cloth to gently wipe the module.
- Do not use harsh chemicals, abrasive materials, or excessive moisture, as these can damage the electronic components.
6.2 Storage
- Store the module in a dry place at room temperature (15°C - 35°C).
- Keep away from direct sunlight, high humidity, and extreme temperatures.
- If storing for an extended period, it is recommended to keep the module in its original anti-static packaging to protect it from electrostatic discharge.
7. Troubleshooting
- No GNSS Fix: Ensure the module has a clear, unobstructed view of the sky. Verify power supply (5V) and ground connections. Check serial communication settings (baud rate 115200bps).
- Incorrect Data: Confirm correct wiring of TX/RX pins. Ensure your microcontroller's serial port is configured correctly.
- Compass Inaccuracy: Calibrate the QMC5883 compass. Keep the module away from strong magnetic fields or ferrous materials that could cause interference.
- Module Not Powering On: Double-check VCC and GND connections and ensure the power supply is providing the correct voltage.
- Intermittent Operation: Check for loose connections or poor soldering. Ensure the power supply is stable and can provide sufficient current (25mA).
8. User Tips
- Antenna Placement: For best signal reception, mount the module with its ceramic antenna facing upwards and with an unobstructed view of the sky. Avoid placing it directly under metal objects.
- Power Filtering: If experiencing noisy data, consider adding a small capacitor (e.g., 100nF) across the VCC and GND pins close to the module to filter power supply noise.
- Software Libraries: Utilize existing open-source libraries for NMEA parsing and QMC5883 compass communication for easier integration with popular microcontrollers like Arduino or ESP32.
- Cold Start vs. Hot Start: Be aware that a cold start (first power-up or after long storage) will take longer to get a fix than a hot start (brief power cycle).
9. Warranty & Support
For any issues such as product damage, missing parts, or technical inquiries, please contact our customer support team. We are committed to providing prompt assistance.
- Phone/WhatsApp: +86 18929344627
- Email: sales09@diymalls.com
We will reply to you as soon as possible.
10. Disposal & Recycling
This symbol indicates that this product should not be treated as household waste.
According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
- Dispose of packaging materials responsibly. Recycle paper, cardboard, and plastic where facilities exist.
- Please help protect our environment by disposing of this product responsibly.
11. Compliance Information
This product complies with the essential requirements of the following EU Directives and Regulations (where applicable):
- General Product Safety Regulation (EU) 2023/988 (GPSR)
- EMC Directive 2014/30/EU
- ROHS Directive 2011/65/EU and (EU) 2015/863
- WEEE Directive 2012/19/EU
- REACH Regulation (EC) No 1907/2006
The CE marking indicates conformity with applicable EU Directives.
For the full universal product safety and user manual, please refer to the PDF document available at: Universal Product Safety & User Manual (PDF)