Introduction
Thank you for choosing the HOMCOM Cross-Legged Office Chair. This manual provides essential information for the safe and efficient use of your new chair. Please read it thoroughly before assembly and operation, and retain it for future reference.

Setup (Assembly)
This office chair requires assembly. Please follow the step-by-step instructions provided in the packaging with your product. Ensure all components are present before beginning assembly. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
- Unpack all components and verify against the parts list in your product's assembly guide.
- Do not fully tighten screws until all components are loosely assembled.
- Ensure all connections are secure before using the chair.
If you encounter any difficulties during assembly, please refer to the detailed instructions included in your product box or contact customer support.
Operating Instructions
Your Cross-Legged Office Chair is designed for comfort and adaptability. Familiarize yourself with its adjustable features:
- Height Adjustment: Locate the lever under the seat on the right side. To raise the seat, lift the lever while taking your weight off the chair. To lower the seat, lift the lever while seated. Adjust to a height where your feet are flat on the floor or your thighs are parallel to the ground.
- Tilting Function: The chair features a gentle tilting mechanism. To activate or deactivate the tilt, push or pull the same lever used for height adjustment. Some models may have a separate knob to adjust tilt tension; turn clockwise to increase tension, counter-clockwise to decrease.
- 360° Swivel: The chair seat can rotate a full 360 degrees, allowing for easy movement and access to different areas of your workspace without needing to reposition the entire chair.
- Smooth-Rolling Wheels: The chair is equipped with silent PU wheels designed for comfortable movement across various floor types, including wooden floors, carpets, and marble floors, without causing damage.


Maintenance
Regular maintenance will prolong the life and appearance of your office chair:
- Cleaning: The synthetic leather upholstery is waterproof and easy to clean. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and wipe dry. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
- Wheel Care: Keep the wheels free of hair, dust, and debris to ensure smooth rolling. You can use a small brush or vacuum cleaner to clean them.
- Gas Lift: Do not attempt to disassemble the gas lift cylinder. If it malfunctions, contact customer support.
Troubleshooting
If you encounter issues with your chair, try the following common solutions:
- Chair Sinks or Won't Stay Up: This usually indicates a faulty gas lift cylinder. This component is not user-serviceable and requires replacement. Contact customer support for assistance.
- Squeaking Noises: Check and tighten all assembly bolts. A small amount of silicone lubricant can be applied to moving parts (e.g., tilt mechanism, wheel axles) if tightening doesn't resolve the issue.
- Wheels Not Rolling Smoothly: Inspect wheels for trapped debris (hair, lint, etc.) and clean them thoroughly. Ensure the floor surface is clear.
- Chair Feels Unstable: Verify that all screws are securely tightened and that the base is properly attached to the gas lift and seat mechanism.
For persistent problems, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Reference | 921-887V00 (Available in Dark Gray, White, Light Gray) |
| Material | Synthetic Leather (100% Polyester), Foam, Metal |
| Total Measurements (WxDxH) | 62 cm x 65 cm x 83-93 cm |
| Seat Measurements (WxDxH) | 62 cm x 50 cm x 45-55 cm |
| Backrest Measurements (WxH) | 60 cm x 36 cm |
| Maximum Load Capacity | 120 kg |
| Installation Method | Assembly Required |
| General Use | Commercial Furniture |
| Specific Use | Office Chair |
| Type | Office Furniture |
| Wheels | Silent PU Wheels, 360° Swivel |
| Gas Piston | Class 3 |

Warranty and Support
This product comes with a 3-year quality guarantee. For any warranty claims or technical support, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
For assistance, please refer to the contact information provided with your purchase or on the seller's official website.
User Tips
- Cross-Legged Comfort: The chair's wide, U-shaped seat and double padding are specifically designed to allow comfortable cross-legged sitting for extended periods. Utilize this feature for enhanced comfort during long work sessions.

Image: Wide U-shaped seat and double padding for comfortable cross-legged posture. - Floor Protection: The silent PU wheels are gentle on various floor surfaces. However, for maximum protection and to minimize wear, consider using a chair mat, especially on delicate flooring or high-traffic areas.

Image: Floor-friendly wheels for wooden, carpet, and marble floors. - Space-Saving Design: The armless design allows the chair to be easily tucked under most desks when not in use, helping to save space in your office or home.

Image: Armless design allows the chair to fit under a desk.