Introduction
This manual provides instructions for the setup, operation, and maintenance of your Lemorele HD20 4K USB C Hub. This Multi-Stream Transport (MST) docking station is designed to expand your display capabilities, offering triple independent display support for macOS and versatile extended/mirror modes for Windows, with resolutions up to 4K@30Hz. It features a durable aluminum body and a braided cable for enhanced longevity.

Figure 1: Lemorele HD20 USB C Hub, a multi-stream transport adapter for Mac/OS, supporting 4K at 30Hz.
Setup Instructions
- Unboxing: Carefully remove the Lemorele HD20 hub from its packaging. Verify that all components are present.
- Connecting the Hub: Connect the USB-C/A cable of the HD20 hub to a compatible USB-C or USB-A port on your host device (laptop, desktop, etc.).
- Connecting Displays: Connect your HDMI-enabled monitors, TVs, or projectors to the HDMI ports on the HD20 hub using standard HDMI cables.
- Driver Installation (First-Time Use):
For optimal performance, especially for 1080P output and extended display modes, driver installation is required for first-time use. The 4K interface supports plug-and-play functionality, but drivers are necessary for 1080P interfaces to function correctly.

Figure 2: Driver installation prompt for UDisplay, highlighting the need for drivers for 1080P interfaces.
- For Windows (10 and above):
- After connecting the product, navigate to 'This PC' or 'My Computer'.
- Locate and double-click the 'CD Drive (X:) UDisplay' to run the installation program.
- Follow the on-screen prompts to install the UDisplay application. Confirm any security prompts. Your computer may restart during this process.

Figure 3: Windows Product Usage diagram illustrating driver installation steps.
- For macOS (10.15 and above):
- After inserting the product, a 'CD-ROM driver' pop-up will appear in the upper right corner of your desktop. Click on it to initiate the UDisplay application installation.
- Follow the prompts to complete the installation.
- Note: Mac computers may need to manually open the UDisplay application during the first run if it does not launch automatically.

Figure 4: Mac OS Product Usage diagram illustrating driver installation and settings.
- For Windows (10 and above):
Operating Modes
The Lemorele HD20 supports various display modes to enhance your productivity.

Figure 5: The HD20 hub is compatible with various USB-C devices and HDMI displays, supporting Windows 10+ and Mac OS 10.15+.
Windows (10 and above)
- Extended Mode (A-B-C or A-B-B): This mode allows you to display different content across multiple screens, expanding your desktop workspace. For example, you can have one application on your laptop screen (A), another on the first external monitor (B), and a third on the second external monitor (C).
- Mirror Mode (A-A-A): This mode duplicates your primary display across all connected monitors, showing the same content on every screen.
macOS (10.15 and above)
The Lemorele HD20 leverages Multi-Stream Transport (MST) technology to provide advanced display options for macOS users.
- Multi-Stream Transport (MST) for Triple Independent Display (A-B-C): This unique feature allows macOS users to achieve three distinct displays, showing different content on your MacBook screen and two external monitors. This overcomes the typical macOS limitation of only supporting mirrored or extended (A-B-B) modes with multiple external displays.
- Extended Mode (A-B-B): Extends your desktop across two external monitors, with one external monitor mirroring the other, or one external monitor extending the laptop display and the other mirroring the laptop display.
- Mirror Mode (A-A-A): Duplicates your primary display across all connected monitors.

Figure 6: Mac OS Multi-Stream Transport Extension diagram illustrating various display configurations.

Figure 7: Examples of extended (A-B-C) and mirror (A-B-B) modes on Windows and macOS.
Video 1: Product demonstration showcasing the features and connectivity of the Lemorele HD20 hub.
Maintenance
To ensure the longevity and optimal performance of your Lemorele HD20 hub, follow these maintenance guidelines:
- Keep the hub clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
- Do not attempt to disassemble or repair the device yourself. Unauthorized repairs will void the warranty.
- Handle the braided cable with care to prevent kinks or damage.
Troubleshooting
Common Issues and Solutions
- No Display or Intermittent Connection:
- Ensure all cables (USB-C/A from host to hub, HDMI from hub to monitors) are securely connected.
- Verify that the HD20 hub is properly connected to a functional port on your host device.
- Check the input source settings on your monitors to ensure they are set to the correct HDMI input.
- Driver Issues / 1080P Display Not Working:
- If 1080P displays are not working or extended mode is not functioning as expected, ensure the UDisplay driver is correctly installed. Refer to the 'Setup Instructions' section for detailed steps. Reinstall the driver if necessary.
- For macOS, if the UDisplay application does not launch automatically after installation, manually open it from your Applications folder.
- Resolution Problems:
- Confirm that your host device and connected monitors support the desired resolution. The hub supports up to 4K@30Hz.
- Remember that one port may be limited to 1080P and requires driver installation for full functionality.
- Extended Mode Not Working on Mac:
- Verify your macOS version is 10.15 or above.
- In your Mac's display settings, confirm that the Mac's built-in display is recognized and configured correctly.
- Compatibility Issues:
- This product is designed for and compatible with Windows 10+ and macOS 10.15+ operating systems.
- It is not compatible with Android or Linux operating systems.
Specifications

Figure 8: Physical dimensions of the Lemorele HD20 hub and its cable.
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Model | HD20 |
| Type | MST (Multi-Stream Transport) |
| Connector A | Type-C |
| Connector B | HDMI-Compatible (x2) |
| Gender | Male-Female |
| Certification | CE |
| Origin | Mainland China |
| Hub Body Dimensions | 6.1 cm (2.4 in) x 4.3 cm (1.69 in) |
| Cable Length | 60 cm (1.96 ft) |
| Weight | 0.1 kg (approx. 0.087 kg package weight) |
| External Power Source | No |
| Amplifier | No |
| High-concerned chemical | None |
| Plug Type | UK Plug (Note: Actual plug type may vary based on region/seller offering) |
| Package | Yes |
| Max Resolution | 4K@30Hz (one port may require driver for 1080P) |
| Supported Operating Systems | Windows 10+, macOS 10.15+ |
| Unsupported Operating Systems | Android, Linux |
User Tips
- For macOS users, the MST feature allows for true triple independent displays, a significant advantage over standard adapters. Ensure your macOS is updated to 10.15 or above for this functionality.
- Always ensure the UDisplay driver is installed for full functionality, especially for 1080P outputs and extended modes. A quick reinstallation can often resolve display issues.
- If you encounter issues with extended mode on a Mac, check your Mac's display settings to confirm the built-in display is active and properly configured.
- While the 4K port is plug-and-play, remember that the 1080P port requires the UDisplay driver for activation.
Warranty & Support
For technical support, warranty claims, or further assistance with your Lemorele HD20 4K USB C Hub, please contact the Lemorele Official Store directly through your purchase platform. It is recommended to keep your proof of purchase for warranty validation.