1. Introduction and Overview
The Lemorele HD10 is a versatile USB-C/A to Dual HDMI Adapter designed to expand your display capabilities on compatible devices. This docking station leverages Multi-Stream Transport (MST) technology to enable extended desktop functionality across multiple monitors, enhancing productivity and workspace. It supports both Windows and macOS operating systems, allowing for flexible display configurations.
Key Features:
- MST Functionality: Extends your desktop to two additional monitors, supporting triple independent display on Windows and macOS (where three monitors show different content simultaneously).
- Two-in-One Port Design: Features a dual-purpose USB-C/A port for broad compatibility with various laptops, including HP, MacBook, Lenovo, and Dell.
- Extended Braided Cable: Equipped with a durable nylon braided cable, approximately 0.6 meters (1.96 ft) in length, offering flexibility and resistance to bending damage.
- High-Quality Material: Constructed with an aluminum alloy shell for a premium feel and efficient heat dissipation, ensuring stable performance.

Figure 1: Lemorele HD10 USB-C/A to Dual HDMI Adapter
Video 1: Product Overview and Features
2. Setup Instructions
Follow these steps to set up your Lemorele HD10 adapter and connect it to your computer and external displays.
2.1. System Requirements
- Operating System: Windows 10 and above, macOS 10.15 and above.
- Host Device: Laptop or desktop with an available USB-C or USB-A port.
- Displays: Monitors, televisions, or projectors with HDMI input.

Figure 2: Wide Compatibility Overview
2.2. Driver Installation (First-Time Connection)
Upon first connecting the adapter, you may need to install a driver for proper functionality. The adapter acts as a virtual CD-ROM drive containing the necessary software.
For Windows (Windows 10 and above):
- Connect the Lemorele HD10 adapter to an available USB-C or USB-A port on your computer.
- Open 'This PC' or 'My Computer'. You should see a new drive labeled 'CD Drive (H:) UDisplay' or similar.
- Double-click this drive to run the installation program.
- Follow the on-screen prompts to install the UDisplay application. During installation, your computer may prompt for confirmation to install the device or restart. This is normal.
- After installation, the application interface will display, and the connection status should show as 'Connected'.

Figure 3: Windows Driver Installation Process
For macOS (macOS 10.15 and above):
- Connect the Lemorele HD10 adapter to an available USB-C or USB-A port on your MacBook.
- A CD-ROM driver icon will appear in the upper right corner of your desktop. Click on this icon to install the UDisplay application.
- Follow the prompts to complete the installation.
- Mac computers may require you to manually open the UDisplay application during the first run.

Figure 4: macOS Driver Installation Process
2.3. Connecting Displays
Once the driver is installed and the adapter is recognized:
- Connect your external HDMI displays to the HDMI ports on the Lemorele HD10 adapter.
- Ensure your displays are powered on and set to the correct HDMI input source.
- Your computer should detect the connected displays. You can then configure the display settings in your operating system.
3. Operating Instructions
The Lemorele HD10 adapter supports various display modes to suit your needs. The primary modes are Multi-Stream Transport (MST) for extended displays and Single-Stream Transport (SST) for mirrored displays.
3.1. Windows Display Modes
On Windows 10 and above, the adapter supports MST, allowing for multiple independent displays. You can configure these settings via the Display Settings in Windows.
- Extend Mode (A-B-C): Your laptop screen (A) and two external monitors (B and C) all display different content, maximizing your workspace.
- Extend Mode (A-A-B): Your laptop screen (A) and one external monitor (A) mirror each other, while the second external monitor (B) extends the display with different content.
- Extend Mode (A-B-B): Your laptop screen (A) extends the display, while both external monitors (B and B) mirror each other.
- Mirror Mode (A-A-A): All three screens (laptop and two external monitors) display the same content.

Figure 5: Windows Multi-Stream Transport (MST) Display Configurations
3.2. macOS Display Modes
On macOS 10.15 and above, the adapter also supports MST for extended displays. You can configure these settings in System Preferences > Displays.
- Extend Mode (A-B-C): Your MacBook screen (A) and two external monitors (B and C) all display different content.
- Extend Mode (A-A-B): Your MacBook screen (A) and one external monitor (A) mirror each other, while the second external monitor (B) extends the display with different content.
- Mirror Mode (A-A-A): All three screens (MacBook and two external monitors) display the same content.

Figure 6: macOS Multi-Stream Transport (MST) Display Configurations
To switch between extended and mirrored modes, look for an 'Extension switch' within the UDisplay application interface or your operating system's display settings.
4. Maintenance
To ensure the longevity and optimal performance of your Lemorele HD10 adapter, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the aluminum alloy shell. Avoid using harsh chemicals or abrasive materials that could damage the finish.
- Cable Care: The nylon braided cable is designed for durability and resistance to bending. However, avoid extreme bending or sharp angles to prevent internal damage. Store the cable neatly when not in use.
- Heat Dissipation: The aluminum alloy shell aids in efficient heat dissipation. Ensure the adapter is placed in a well-ventilated area and not covered, allowing for proper airflow.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
If you encounter issues with your Lemorele HD10 adapter, refer to the following common problems and solutions:
5.1. No Display or Incorrect Display Mode
- Driver Installation: Ensure the UDisplay driver is correctly installed. For Windows, check 'This PC' for the virtual CD drive. For macOS, ensure the application is run manually if it doesn't launch automatically.
- System Compatibility: Verify that your operating system is Windows 10 or above, or macOS 10.15 or above. Android and Linux systems are not supported.
- Cable Connections: Double-check all HDMI and USB-C/A connections. Ensure they are securely plugged in.
- Display Input: Confirm that your external monitors are set to the correct HDMI input source.
- Resolution: The UDisplay application primarily supports 1080P output. If you are experiencing issues with higher resolutions, try adjusting your display settings to 1080P.
- Mac Extended Mode Exception: If you experience an exception in extended mode on Mac, confirm that your Mac's built-in display is correctly configured in the Mac display settings.
5.2. Installation Prompts or Restarts
- During the initial driver installation on Windows, it is normal for the computer to prompt for confirmation to install the device or even restart. Follow the prompts to complete the process.
5.3. Adapter Not Recognized
- Ensure the USB-C/A connector is fully inserted into your computer's port.
- Try connecting the adapter to a different USB-C or USB-A port on your computer.
- If using a USB-A port, ensure it is a functional data port.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | lemorele |
| Model Number | HD10 |
| Type | USB-C/A to Dual HDMI Adapter |
| Connector A | USB-C / USB-A (Male) |
| Connector B | HDMI-Compatible (Female) x 2 |
| Gender | Male-Female |
| Cable Length | 60 cm (approx. 1.96 ft) |
| Cable Material | Nylon Braided |
| Housing Material | Aluminum Alloy |
| Supported Operating Systems | Windows 10 and above, macOS 10.15 and above |
| Max Resolution (UDisplay) | 1080P |
| External Power Source | No |
| Weight | 0.12 kg |
| Certification | CE |
| Origin | Mainland China |

Figure 7: Product Dimensions and Cable Length

Figure 8: Aluminum Alloy Housing for Heat Dissipation
7. User Tips
- Versatile Connectivity: The adapter's USB-C/A design means it can connect to both USB-C and traditional USB-A ports, making it compatible with a wider range of laptops and desktops.
- Maximize Productivity: Utilize the MST (Multi-Stream Transport) feature to set up multiple extended displays, significantly increasing your screen real estate for multitasking.
- Driver Installation: Remember that the driver is typically found on a virtual CD drive that appears when you first connect the device. If it doesn't auto-run, navigate to 'This PC' (Windows) or your desktop (macOS) to find and install it.
- Mac Specifics: Mac users should be aware that the UDisplay application might need to be opened manually after the initial installation. Also, ensure your Mac's built-in display settings are correctly configured if you experience issues with extended mode.
8. Warranty and Support
The Lemorele HD10 adapter is CE certified, indicating compliance with European safety, health, and environmental protection requirements.
For any questions, technical assistance, or support regarding your Lemorele HD10 adapter, please contact the customer support team of your retailer or the manufacturer. They are available to assist you with product inquiries and troubleshooting.