Product Overview
The XY-Q100H is a high-performance 2.1-channel Bluetooth digital audio amplifier board designed to deliver powerful output and clear, stable sound quality. It features dual TPA3116D2 amplifier chips and a Qualcomm QCC3034 Bluetooth solution, supporting APTX/APTX-HD/AAC high-definition decoding. With multiple audio input options (Bluetooth, AUX, USB Sound Card) and independent bass and treble adjustments, it provides an immersive listening experience for diverse usage needs. An enlarged heat sink ensures efficient cooling and reliable long-term operation.




Setup Instructions
The product is shipped unassembled, and accessories are shipped separately for self-assembly. Please follow the steps below for proper setup.
1. Assembly (if applicable)
Depending on the version purchased (Integrated Potentiometer, External Potentiometer, or Integrated Enclosure), assembly may vary. Refer to the product dimensions and component layout for guidance.

2. Cable Connections
Ensure all connections are secure before powering on the device.
- Power Supply: Connect a DC 12-24V / 5A or higher power supply to the DC 12-24V (5.5-2.5/2.1mm) input port.
- Speakers: Connect your speakers to the designated terminals: Speaker (Right), Speaker (Left), and Speaker (Subwoofer). Use a screwdriver to secure the speaker wires.
- Audio Input: Choose your preferred audio input method:
- Bluetooth (BT): For wireless audio streaming.
- AUX (3.5mm): For wired audio devices.
- USB Sound Card: For connecting to a computer via USB.
- External Antenna (Optional): An external 2.4GHz antenna can be installed on the first-generation IPEX interface (already installed on PCBA) for improved Bluetooth range.


Operating Instructions
1. Power On/Off
Slide the power switch to the 'ON' position to power on the amplifier. Slide it to 'OFF' to power off.

2. Bluetooth Pairing
- Ensure the amplifier is powered on. The indicator light will blink, indicating it's in pairing mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "XinYi" from the list of devices to pair. A confirmation sound will indicate successful pairing.
3. Audio Playback and Adjustments
Once connected, you can play audio from your selected source. Use the knobs to adjust sound parameters:
- L&R VOL: Adjusts the volume for the left and right channels.
- L&R TREBLE: Adjusts the treble for the left and right channels.
- L&R BASS: Adjusts the bass for the left and right channels.
- SUB-VOL: Adjusts the subwoofer volume.
- SUB-FRE: Adjusts the subwoofer frequency.
The main volume knob also features multi-functional controls:
- Click: Pause/Play
- Double-click: Next track
- Triple-click: Previous track
- Long press: Cancel Bluetooth pairing
Specifications
| Parameter | Detail |
|---|---|
| Product Name | 2.1-Channel Bluetooth Digital Audio Amplifier Board |
| Model Number | XY-Q100H |
| Power Supply | DC 12-24V / 5A or higher |
| Audio Inputs | Bluetooth / AUX / USB Sound Card |
| Bluetooth Name | Xin Yi |
| Bluetooth Audio Decoding | APTX / APTX-HD / SBC / AAC |
| Integrated Potentiometer Dimensions | 112*114*24mm |
| External Potentiometer Dimensions | 112*94.6*24mm |
| Integrated Enclosure Dimensions | 112*114*30mm |
Power Supply & Output Details:
| DC Voltage | Channel | Output Power (Max) |
|---|---|---|
| 12V | Left & Right Channels | 10W+10W@8Ω; 20W+20W@4Ω |
| Subwoofer | 10W@8Ω; 20W@4Ω; 32W@2Ω | |
| 21V | Left & Right Channels | 25W+25W@8Ω; 50W+50W@4Ω |
| Subwoofer | 25W@8Ω; 50W@4Ω; 100W@2Ω | |
| 24V | Left & Right Channels | 35W+35W@8Ω; 4Ω not recommended |
| Subwoofer | 35W@8Ω; 70W@4Ω |

Maintenance
To ensure the longevity and optimal performance of your amplifier board, please follow these maintenance guidelines:
- Cleaning: Gently wipe the board with a dry, soft cloth. Avoid using liquid cleaners or solvents.
- Environment: Keep the amplifier board in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive humidity.
- Power: Always disconnect the power supply before performing any cleaning or maintenance.
- Heat Dissipation: Ensure the enlarged heat sink is free from dust and obstructions to maintain efficient cooling.
Troubleshooting
- No Sound:
- Check all power and speaker connections.
- Ensure the power supply meets the DC 12-24V / 5A or higher requirement.
- Verify the audio input source is correctly selected and functioning.
- Adjust volume levels on both the amplifier and the audio source.
- Poor Sound Quality (Distortion, Noise):
- Check for loose or incorrect wiring.
- Ensure speaker impedance matches the amplifier's recommendations (e.g., avoid 4Ω for 24V L&R channels).
- Reduce the volume to see if distortion decreases.
- Test with a different audio source or cable.
- Ensure the power supply is stable and free from fluctuations.
- Bluetooth Connection Issues:
- Ensure the amplifier is powered on and the indicator is blinking.
- Try canceling Bluetooth pairing (long press the main volume knob) and re-pairing.
- Move your device closer to the amplifier to reduce interference.
- Restart both the amplifier and your Bluetooth device.
User Tips
- Optimal Power Supply: Using a stable power supply within the recommended 12-24V range and sufficient amperage (5A or higher) is crucial for achieving the specified output power and sound quality.
- Speaker Matching: Pay close attention to speaker impedance, especially for the 24V Left & Right channels where 4Ω is not recommended, to prevent damage and ensure optimal performance.
- Heat Management: While the board has an enlarged heat sink, ensure adequate airflow around the unit, especially if enclosing it, to prevent overheating during prolonged use at high volumes.
- Customization: Experiment with the independent bass and treble adjustments to tailor the sound profile to your personal preferences and the acoustics of your listening environment.
Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the official user manual PDF available online. You can access the PDF document here.