1. Product Overview
The ipega STK-7045 is a dedicated wireless gaming controller designed for seamless compatibility with both Nintendo Switch and Nintendo Switch OLED consoles. It offers an immersive gaming experience through advanced features like realistic vibration feedback, precise motion sensing, and an efficient TURBO function.
This controller connects wirelessly via Bluetooth, freeing you from cable constraints and allowing for flexible gameplay. Its ergonomic design ensures comfort during extended gaming sessions, while cool backlit buttons enhance visibility and aesthetics.


2. Package Contents
Please check the package carefully to ensure all items are present:

- 1 × Wireless Bluetooth Controller (STK-7045)
- 1 × Storage and Protection Bag
- 1 × USB-Type-C Data Cable
- 1 × Type-C Magnetic Charging Head
- 4 × NS Console "part" (spacers for installation)
- 1 × STK-7045 User Manual (this document)
3. Compatibility
The STK-7045 Wireless Bluetooth Controller is compatible with:
- Nintendo Switch Console
- Nintendo Switch OLED Console
Note: The included "NS Console part" (spacers) are specifically designed for the Nintendo Switch console and are not used with the Nintendo Switch OLED console during installation.
4. Setup Instructions

4.1. Installation Steps
I. For Nintendo Switch OLED Console:
- Remove the Joy-Cons on both sides of the console.
- Hold the controller in place. Gently push out the console from the bottom to remove it.
II. For Nintendo Switch Console:
- Remove the Joy-Cons on both sides of the console.
- Insert the attached "spacer" into the slide rails on both sides of the console respectively.
- Align the controller track and insert the main unit from the middle of the controller until the main unit is fully inserted into the controller.
- Gently lift up the top of the "spacer" and then pull out the spacer.
4.2. Connection Method
- Confirm that the console's flight mode is turned off.
- Enter the connection interface on your Nintendo Switch (Home Menu > Controllers > Change Grip/Order).
- Press and hold the [SYNC] key on the controller until the four signal lights flash rapidly. Release the button and wait for a successful connection.
After the initial successful connection, you can wake up the console and reconnect by briefly pressing the [HOME] key.
5. Operating Instructions
5.1. Turbo Function
The Turbo function can be assigned to basic buttons: A, B, X, Y, L1, L2, R1, R2.
Turn on Manual Turbo:
Press the [Turbo] button and a basic button simultaneously to activate manual Turbo for that button.
Turn on Auto Turbo:
Repeat the above steps: press the [Turbo] button and the basic button (which already has manual Turbo enabled) simultaneously to activate automatic Turbo for that button.
Turn off Turbo for a single button:
Repeat the above steps again: press the [Turbo] button and the basic button (which already has automatic Turbo enabled) simultaneously to turn off Turbo for that button.
Turn off Turbo for all buttons:
Long press the [Turbo] key for 5 seconds. The four signal lights will flash 3 times, indicating that the Turbo function for all buttons has been turned off.
Turbo Speed Adjustment:
The Turbo speed is adjustable in three levels:
- Slow speed (5 rounds per second): Press the [Turbo] key and [↓] button simultaneously. LED2 flashes during use.
- Medium speed (10 rounds per second): Press the [Turbo] key and [→] key simultaneously. LED2 and LED3 blink during use.
- Fast speed (20 rounds per second): Press the [Turbo] key and [↑] key simultaneously. LED2, LED3, and LED4 blink during use.
5.2. Vibration Function
There are four levels of vibration intensity: none, weak, medium, and strong.
To adjust vibration intensity:
- Ensure the controller is successfully connected to the console.
- Press and hold the four buttons L1, R1, L2, R2 simultaneously for approximately 1 second. The controller will vibrate once, indicating successful adjustment. This cycles through the 4 levels.
5.3. Light Effect Control
Press the [L3] and [+] buttons simultaneously to turn the button lighting effect on or off.
5.4. Charging Tips
- Low battery alert: LED4 flashes rapidly.
- Charging in progress: LED4 flashes slowly.
- Fully charged: LED4 turns off.
6. Maintenance
To ensure the longevity and optimal performance of your STK-7045 controller, follow these maintenance guidelines:
- Keep the controller clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the controller is fully charged before storage to maintain battery health.
- If the controller experiences unresponsive behavior or persistent issues, a factory reset may resolve the problem (refer to Troubleshooting section).
7. Troubleshooting (Frequently Asked Questions)
Q: How to solve the problem that the controller's joystick will not automatically return to the center when it is stuck at the edge?
A: Try to set the joystick right to the center and then press down with your thumb to turn the joystick again.
Q: What is the situation that I can't wake up and connect back to the console by pressing the [HOME] button?
A: Make sure the controller and the console have made the initial connection. Press the HOME key briefly for about 1 second and release your finger after the signal light comes on; do not keep holding it down.
Q: Is there a way to recover from the drift of the joystick during the use of the controller?
A: Please try the following calibration method: Turn off the controller and place it on a horizontal surface. Press the [B], [HOME], and [-] buttons simultaneously. The signal lights will double flash alternately. Then, press the [+] button until the signal lights go out, and the calibration is completed.
Q: What should I do when the controller is not operating, the vibration can't stop, it can't be charged, the function of the buttons is disordered, etc.?
A: For all functional problems on the controller, you can try to restore the factory settings by poking the reset button on the back of the controller with a thin needle to see if it is solved.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | STK-7045 |
| Brand Name | ipega |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED |
| Interface Type | Type C |
| Battery Included | Yes |
| Battery Capacity | 400mAh |
| Charging Time | 1-1.5 hours |
| Charging Current | 5V 350mA |
| Max Operating Current | 5V 150mA |
| Trigger Button Type | Non-Linear |
| Wear-resistant joysticks | Yes |
| RGB lighting joysticks | No |
| Product Weight (Including Packaging) | 329.5g |
| Product Packaging Dimensions | 27.5 x 4.5 x 13 cm |
| Origin | Mainland China |
9. User Tips
- Initial Connection: For the first connection, ensure your console's airplane mode is off. If you encounter issues, delete previous controller information from the Switch settings (System Settings > Controllers and Sensors > Disconnect Controllers) and re-pair.
- Waking the Console: After initial pairing, a quick press of the HOME button should wake the console and reconnect the controller. Avoid holding the button down for too long.
- Joystick Calibration: If you experience joystick drift, try the calibration method described in the Troubleshooting section before attempting a factory reset.
- Battery Management: Charge the controller fully before long gaming sessions to avoid interruptions. The LED indicator provides clear status updates for charging and low battery.
10. Warranty and Support
For detailed warranty information and further support, please refer to the official documentation provided by the manufacturer. An additional user manual in PDF format is available for download:
If you encounter any issues not covered in this manual, please contact the seller or manufacturer's customer support.