SHEIK MAINLAND 3MIN PROJECT A 3.75-inch Super Movable Humanoid Body Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your SHEIK MAINLAND 3MIN PROJECT A 3.75-inch Super Movable Humanoid Body action figure. This highly articulated model is designed for collectors and enthusiasts, offering extensive posing possibilities and customization options with various accessories.

Figure: SHEIK MAINLAND 3MIN PROJECT A Super Movable Humanoid Body.

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This product contains small parts and is not suitable for children under 3 years old due to choking hazards. Recommended age for use is 14+ years.

3. Package Contents

Please verify that all components are present before beginning assembly:

• 1x 3.75-inch Super Movable Humanoid Body Figure (main body)
• 1x 3MIN Exclusive Platform (display stand)
• 6 sets of replacement hand shapes
• Universal weapon accessories (various weapons and weapon parts)
• Assembly instruction sheets

Figure and included accessories.

4. Assembly Instructions

The figure is an assembly model. Please follow the diagrams carefully. Some parts may require gentle force to connect, and a "click" sound indicates a secure connection for certain joints. If any joints feel loose, a small amount of adhesive can be used, but this will reduce articulation.

4.1. General Assembly Tips

• Identify all parts before assembly.
• Apply gentle, even pressure when connecting parts to avoid breakage.
• Ensure correct orientation for left and right-specific parts (e.g., wrists, legs).
• For tight joints, gently warm the connecting parts with a hairdryer before assembly to make them more pliable and ensure a firmer fit.
• For small ball joints, especially in the head or chest, if you need to disassemble them (e.g., to change eye core), warming with a hairdryer first can help prevent damage.
• The knee and elbow joints are designed to be universal with other 3MIN series products, allowing for customization.

4.2. Figure Body Assembly (Refer to Diagram 2)

Diagram 2: Detailed assembly for the figure's main body parts.

1. Head Assembly (Section 07): Connect parts E1, E2, and A6 to form the head. The eye core can be changed if desired (refer to general tips for warming if needed).
2. Torso Assembly (Section 08, 10): Assemble the chest (E10, E11, A8) and main body parts (03, 04, 06, 07, E21, B3, B6). The holes at the back of the arms contain threads; rotate them during installation until they are fully seated for a secure fit.
3. Arm Assembly (Section 08, 09, 12): Attach the shoulder parts (A1, 03) to the torso, ensuring the shaped part faces forward. Connect the wrist parts (E9, E8, E12, E13, A6) to the arms, noting left and right distinctions for parts E12/E13.
4. Leg Assembly (Section 08, 11, 13): Connect the leg parts (A3, E5, E16, E15, E7, E6) to the main body, observing left and right distinctions for the calf shapes. Assemble the foot parts (A1, A2, E19, E20) and attach them to the legs. Press until you hear a "click" for a secure connection.

4.3. Accessories and Platform Assembly (Refer to Diagram 1)

Diagram 1: Assembly for weapons and the display platform.

1. Platform Assembly (Section 01, 03, 04): Assemble the platform using parts C1, C2, C3, C5, C6, C7. The platform features 3MM holes for attaching the figure or weapons directly, or using adapters. The bottom of the platform also has three 4MM balls for storing unused hand shapes.
2. Weapon Assembly (Section 02): Assemble the universal weapon accessories using parts D1, D2, D3, D5, D6, D7. The scabbard is designed as a universal handle, compatible with both long and short weapons.
3. Connecting to Figure: Use the provided ball joint parts (B7/C7, 4MM or 2MM diameter) to insert into connectors and attach accessories or the figure to the platform as needed.

5. Operating Instructions

Your 3MIN PROJECT A figure is designed for high poseability. Its numerous joints allow for a wide range of dynamic poses. Experiment with different joint movements to achieve desired stances.

• Posing: Gently manipulate the joints to pose the figure. Avoid excessive force to prevent damage.
• Accessory Use: Attach the various hand shapes and weapon accessories to customize your figure's appearance and pose. The display platform can be used to support dynamic aerial or action poses.
• Customization: The figure's joint system is compatible with other 3MIN series products, allowing for cross-compatibility and expanded customization options.

Example of dynamic posing with weapon accessories.

6. Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the figure. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation and discoloration. Keep it in a dust-free environment.
• Joint Care: If joints become stiff, carefully rotate them to loosen. If they become too loose, a small amount of clear nail polish or a specialized joint tightener can be applied to the ball joints and allowed to dry, but this should be done with caution.

7. Troubleshooting

• Loose Joints: If a joint is too loose to hold a pose, refer to the "Joint Care" section under Maintenance.
• Parts Not Fitting: Ensure you are using the correct parts for each section and that they are oriented correctly. Apply gentle, even pressure. Do not force parts together, as this may cause breakage.
• Missing Parts: Refer to the "Package Contents" section. If parts are genuinely missing, contact customer support.

8. Specifications

Figure dimensions (9.6cm height) and various ball joint sizes (3mm, 4mm, 5mm, 6mm).

9. User Tips

• Single Figure: The product typically includes one figure per package, not multiple as some images might suggest for display purposes.
• Careful Assembly: Some users have noted that assembly can be intricate. Take your time and refer to the diagrams to ensure correct and secure connections.
• Joint Tightness: If joints are too loose, a common tip is to apply a thin layer of clear nail polish or a specialized joint tightener to the ball joint and let it dry completely before reassembling. This can add friction and improve pose stability.

10. Warranty and Support

For any issues, questions, or support needs regarding your SHEIK MAINLAND 3MIN PROJECT A figure, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.

11. Statement of Compliance

This product complies with CE certification standards.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.