Introduction
Thank you for choosing the MEKEDE 12.3-Inch Android Car Radio. This head unit is designed to enhance your driving experience with advanced navigation, multimedia, and connectivity features. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and user satisfaction.
Package Contents
Please verify that all items listed below are included in your package:

Figure 1: Package Contents
- Power Cable
- 360 Connector
- USB Cable
- 4G Antenna
- Main Unit (Machine)
- GPS Antenna
- MIC (External Microphone)
- Speaker
Setup and Installation
1. Machine Interface Overview
Familiarize yourself with the connection points on the back of the main unit:

Figure 2: Machine Interface
- Power Cord Interface
- RCA Cable or 360 Cable Interface
- External SIM card slot cable interface
- USB Cable Interface
- NC (Not Connected)
- External microphone interface
- NC (Not Connected)
- LVDS Cable Interface (Connect the LVDS cable removed from the original car screen)
- GPS antenna interface
- 4G antenna interface
- WiFi antenna interface
2. Cable Instructions
Identify the various cables provided for connection:

Figure 3: Included Cables
- Power cord
- VIDEO RCA cable
- MIC External microphone cable
- USB cable
- SIM External SIM card cable
- GPS antenna
- 4G antenna
- WiFi antenna
- Audio connection cable
3. Wiring Method of the Power Cord
For EVO Systems:

Figure 4: Power Cord Wiring (EVO)
Transfer the power cord from the original car CD player and plug it into the Android device. Note the 'NC' (Not Connected) points.
For CCC/CIC/NBT Systems:

Figure 5: Power Cord Wiring (CCC/CIC/NBT)
Transfer the power cord from the original car CD player and connect it to the Android device. Note the 'NC' (Not Connected) points.
Optical Fiber Cable Note: If your original vehicle's CD player has an optical fiber cable on its power cord plug, this cable needs to be moved to the power cord plug of the Android device. Pay close attention to the correct position and direction of the optical fiber cable during this transfer.

Figure 6: Optical Fiber Cable Connection
4. Camera Setting and Wiring Method
For Original Car Camera or Original Car 360 Camera:
Navigate to: Settings > System Settings > Reversing settings > Original Camera.

Figure 7: Original Camera Settings
For Aftermarket Rear Camera:
Navigate to: Settings > System Settings > Reversing settings > Aftermarket Camera.

Figure 8: Aftermarket Camera Settings
Wiring Method for Aftermarket Camera:

Figure 9: Aftermarket Camera Wiring
Connect the camera power to CAMERA +12, the video signal to Connection Rear Camera, and ground to GND. Ensure the Android power cable is also connected.
For Android Built-in 360 Camera:
Navigate to: Settings > System Settings > Reversing settings > Android 360 > 1080P.

Figure 10: Android Built-in 360 Camera Settings
Wiring Method for Android Built-in 360 Camera:

Figure 11: Android Built-in 360 Camera Wiring
Operating Instructions
1. Initial Power On and System Overview
Upon first power-on, the unit will boot into the Android system. The 12.3-inch 2K (2400*900) full-fit screen provides a large viewing angle and supports 2K video playback.

Figure 12: Main Interface
The unit runs on Android 14 with a Snapdragon 685 8-Core processor, 8GB RAM, and 256GB ROM, ensuring smooth operation and ample storage.

Figure 13: Snapdragon 685 Processor
The device supports 4G LTE and WiFi connectivity, allowing for online music streaming, video playback, and app usage.

Figure 14: 4G LTE & WiFi Support
2. Original Vehicle Display Settings
To access the original vehicle's interface, click the vehicle information icon on the main Android interface.

Figure 15: Accessing Car Info
The unit retains original car functions including the radio system, CD function, steering wheel controls, original car amplifier compatibility, original camera compatibility, and I-Drive control.

Figure 16: Retained Original Functions
3. Sound Settings
To configure sound settings, go to Settings > System Settings > AUX Settings. Do not select "Auto-switch AUX"; choose "Custom" for the AUX switching scheme.

Figure 17: AUX Settings
Enter the original vehicle interface, select Media > AUX (or Bluetooth audio for EVO systems), then click the touchscreen or long-press the MENU key of iDrive to enter the Android interface and play music or videos.

Figure 18: Setting to AUX Mode
The unit features a built-in DSP processor for multi-dimensional surround lossless sound effects, providing a high-definition audio-visual experience.

Figure 19: DSP Processor
4. Connectivity and Multimedia
Bluetooth 5.1: The smart BT 5.1 system supports mobile phone BT pairing, hands-free dialing, steering wheel button control, and synchronous call records for safe driving.

Figure 20: Built-in BT 5.1
CarPlay + Android Auto: The car DVD player comes with CarPlay and Android Auto functions, eliminating the need for additional accessories.

Figure 21: CarPlay + Android Auto
Wireless CarPlay / Wireless Auto / Mirror Link:
- Wireless CarPlay: Connect via Bluetooth, then click "ZLINKS" and wait for connection. Can also be connected via USB cable.
- Wireless Auto: Connect via Bluetooth, then click "ZLINKS" and wait for connection. Can also be connected via USB cable.
- Mirror Link: Supports wired and wireless mirroring for both iPhone and Android phones.

Figure 22: Wireless Connectivity Options
GPS Navigation: Built-in global positioning system with omni-directional map display and real-time traffic conditions. Supports various navigation apps like iGo, Navitel, Sygic, Yandex, Google Maps, and Amap.

Figure 23: GPS Navigation
ADAS DVR Anti-collision Warning: Supports ADAS DVR for anti-collision warnings, including right/left lane departure, front distance collision, and front car start reminders. (Note: HD DVR is not included and needs to be purchased separately).

Figure 24: ADAS DVR Support
Rear View Camera 1080P AHD: The 1080P AHD waterproof rear camera can switch to the reverse screen with parking lines when reversing, providing a clear view.

Figure 25: Rear View Camera
360° Panoramic Camera: The 3D/2D 360 camera provides a panoramic view around the vehicle. (Note: Panoramic camera is not included and needs to be purchased separately).

Figure 26: 360° Panoramic Camera
5. User Interface (UI) Options
The unit comes with three built-in UI styles (ID9, ID8, ID7, ID6) that can be changed according to your preferences.

Figure 27: Multiple UI Options
6. Product Demonstration Video
Watch this video for a visual demonstration of the product's features and user interface:
Video 1: Product Features and UI Demonstration
Maintenance
To ensure the longevity and optimal performance of your MEKEDE Car Radio, follow these general maintenance guidelines:
- Keep the screen clean using a soft, lint-free cloth. Avoid abrasive cleaners.
- Ensure all connections are secure and free from dust or debris.
- Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
- Regularly check for software updates to benefit from new features and improvements.
Troubleshooting
Common Installation Problems
1. The device doesn't shut down and the knob doesn't work.
- Check for any modified modules in the original vehicle power cord. If found, remove them.
- Verify that the optical fiber cable has been correctly moved to the Android power cord plug (if applicable).
- Enter
CAN protocol optionin the factory settings. After switching the protocol, press the RST key or reconnect the power cord of the original vehicle and restart for the changes to take effect.
2. No sound.
- First, check the connection method of the audio plug on the power cord.
- Check if there is sound from the original car's FM radio. If so, check the AUX settings. Select manual switching of AUX. Enter the original car interface, select
Media>AUX(orBluetooth audiofor EVO systems), and then enter the Android interface to play music. - If there is no sound from the original vehicle's FM radio either, check whether the optical fiber cable has been moved to the Android cable. Pay attention to the correct position and direction of the optical fiber cable.

Figure 28: Audio Connection for Troubleshooting
3. The interface doesn't switch when reversing.
- Enter the
Gear Selectionin theVehicleoption within the factory settings, and try each of the three gear types one by one. - If the reversing interface cannot be exited, turn off the original vehicle radar button.

Figure 29: Gear Selection Settings
Specifications
| Feature | Specification |
|---|---|
| Brand Name | MEKEDE |
| Display Size | 12.3 inches |
| Resolution | 2400*900 (2K) |
| Operating System | Android 14 |
| CPU | Snapdragon 685, 8-Core (4*2.8GHz + 4*1.9GHz) |
| GPU | Adreno610 1260MHz |
| RAM | 8GB |
| ROM (Storage) | 256GB |
| Bluetooth | BT 5.1 |
| CarPlay | Wireless/Wired (Adjuvant) |
| Android Auto | Wireless/Wired (Adjuvant) |
| Mirror Link | Wireless/Wired |
| Special Features | Built-in GPS, Mobile Phone, CarPlay, Android Auto, Reversing Input, Split Screen |
| OSD Language | Multi-language support (Chinese, English, Arabic, German, French, Spanish, etc.) |
| Voltage | 12 V |
| Out Power | 4*45W |
| Item Weight | 3kg |
| Din | Double Din |
| Built-in Screen | Yes |
| Touch Screen | Yes |
| Warranty | 1 Year |
| Certification | CE, FCC |

Figure 30: Processor Comparison

Figure 31: Product Dimensions
Warranty and Support
The MEKEDE 12.3-Inch Android Car Radio comes with a 1-year warranty period. We are committed to providing innovative hardware and software. Firmware, software, UI, and GPS navigation map updates are provided for free.
For detailed instructions and documents, a user manual in PDF format is available. You can view it here.
User Tips
- The unit offers high-resolution video playback, providing a very satisfying visual experience.
- Explore the numerous customization options available in the settings to personalize your car radio experience.
- The system is designed for quick and responsive operation, making navigation and app usage smooth.